DEWIN DEWIN1000
Contents
DEWIN 1000W Solar Power Inverter User Manual
Model: DEWIN1000
1. Introduction
Thank you for choosing the DEWIN 1000W Solar Power Inverter. This device is designed to convert 12V DC power from sources like car batteries into 220V AC power, suitable for various household appliances. Its compact and lightweight design makes it highly portable and easy to use.
Key features include:
- New Design: Lightweight and user-friendly.
- Multiple Protection Functions: Protects the converter and battery from overload and other issues.
- Safe and Reliable: Provides stable AC power for household appliances like televisions, video cameras, and power tools.
- Durable Material: Constructed from durable aluminum alloy for advanced protection against drops and collisions.
- Portable: Ultra-compact and lightweight, saving space and convenient for transport.
2. Safety Instructions
Please read all safety instructions carefully before operating the inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Keep Away from Children: This device is not a toy. Keep it out of reach of children.
- Avoid Water Sources: Do not expose the inverter to water or operate it in wet environments.
- Correct Connections: Ensure all electrodes and cables are connected correctly and securely before operation. Incorrect polarity can damage the inverter and connected devices.
- Ventilation: Ensure adequate ventilation around the inverter to prevent overheating. Do not block the fan vents.
- Indoor Use: This inverter is designed for indoor use or in protected environments.
- Load Capacity: Do not exceed the rated power output of 1000W. Overloading can cause damage to the inverter and connected appliances.
- Professional Installation: If you are unsure about any installation steps, consult a qualified electrician.
3. Product Overview
The DEWIN 1000W Inverter comes with the main unit and necessary cabling for connection.

Figure 3.1: DEWIN 1000W Inverter and included battery clamp cables and cigarette lighter cable.

Figure 3.2: Front panel of the inverter, featuring the universal AC 220V outlet, a USB charging port, and the ON/OFF power switch. Power and Fault indicator lights are also visible.

Figure 3.3: Side panel of the inverter, showing the positive (+) and negative (-) DC input terminals for battery connection, and the integrated cooling fan for heat dissipation.

Figure 3.4: Approximate dimensions of the DEWIN 1000W Inverter: 19.5 cm (7.68 in) length, 9.5 cm (3.74 in) width, and 5.5 cm (2.17 in) height.
Package Contents:
- 1 x DEWIN 1000W Power Inverter
- 3 x Connection Cables (Battery clamp cables and cigarette lighter cable)
- 1 x User Manual
4. Setup
Follow these steps to set up your DEWIN 1000W Inverter:
- Prepare the Power Source: Ensure your 12V DC power source (e.g., car battery) is fully charged and capable of providing the necessary current for your appliances.
- Connect DC Cables:
- Connect the red battery clamp cable to the positive (+) terminal of the inverter and the positive (+) terminal of your 12V battery.
- Connect the black battery clamp cable to the negative (-) terminal of the inverter and the negative (-) terminal of your 12V battery.
- Alternatively, for lower power devices, you can use the cigarette lighter cable by plugging it into your vehicle's 12V cigarette lighter socket and connecting the other end to the inverter's DC input.
Important: Ensure connections are tight and secure to prevent arcing and overheating. Double-check polarity before proceeding.
- Position the Inverter: Place the inverter on a stable, flat surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure the cooling fan is not obstructed.
- Connect Appliances: With the inverter's power switch in the "OFF" position, plug your AC 220V appliances into the inverter's AC outlet. Do not exceed the inverter's 1000W continuous power rating.
5. Operating Instructions
Once the inverter is set up, follow these steps to operate it:
- Turn On the Inverter: Flip the ON/OFF switch on the inverter's front panel to the "ON" position. The "Power" indicator light should illuminate, indicating the inverter is active.
- Monitor Indicators:
- Power Indicator (Green): Lit when the inverter is operating normally.
- Fault Indicator (Red): Lit when an error occurs (e.g., overload, short circuit, low voltage, high temperature). If this light illuminates, turn off the inverter immediately and troubleshoot the issue.
- Use Appliances: Your connected AC appliances can now be used. For optimal performance and safety, avoid running high-power appliances for extended periods without adequate ventilation.
- USB Charging: The USB port can be used to charge compatible USB devices.
- Turn Off: When finished, first turn off all connected appliances, then switch the inverter's ON/OFF switch to the "OFF" position. Disconnect the inverter from the 12V power source.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your inverter:
- Cleaning: Periodically clean the exterior of the inverter with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ventilation: Ensure the cooling fan and vents are free from dust and debris. Use compressed air to clear any blockages if necessary.
- Cable Connections: Regularly check all cable connections for tightness and signs of corrosion. Clean and re-tighten as needed.
- Storage: When not in use for extended periods, store the inverter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Health: Ensure the 12V battery connected to the inverter is well-maintained and charged to prevent low voltage cut-off issues.
7. Troubleshooting
If you encounter issues with your DEWIN 1000W Inverter, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power output / Inverter not turning on |
|
|
| Fault indicator (Red) is lit |
|
|
| Appliances not working correctly |
|
|
8. Specifications
| Parameter | Value |
|---|---|
| Item Type | 1000W Power Inverter |
| Brand | DEWIN |
| Model Number | DEWIN1000 |
| Material | Aluminum Alloy |
| Power (Continuous) | 1000W |
| Input Voltage | 12V DC |
| Output Voltage | 220V AC |
| Overall Size (Approx.) | 19.5 x 9.5 x 5.5 cm / 7.68 x 3.74 x 2.17 inches |
| Power Source | Solar Energy (implies compatibility with solar charging systems for 12V batteries) |
Note: Manual measurement of parameters may have slight errors.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact DEWIN customer service through your retailer.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.