WOLFBOX USB C Hardwire Kit Instruction Manual

Product Overview

The WOLFBOX USB C Hardwire Kit provides a reliable power solution for your dash camera, enabling 24/7 parking surveillance and protecting your vehicle's battery from draining. This kit features a 21.33ft cable, a 5V/2A steady output, and supports 12V-24V input, making it compatible with a wide range of dash camera brands.

Key Features

• Wide Compatibility: 21.33ft hardwire kit for dash cam or other device powered by USB-C port, 5V/2A steady output, voltage input supports from 12V-24V. Compatible with almost all dash cam brands in the market.
• 24/7 Parking Surveillance: Directly connects to the battery for constant 24/7 power to protect against theft when your car is in the parking lot.
• Ignition Power Supply: Directly connects to the ignition wire for power only, allowing the dashcam to turn on and off with the ignition without manual intervention.
• Low Voltage Protection: Features a smart low voltage protection system that automatically shuts off power to your dash cam when the battery voltage drops below a safe level, preventing battery drain.

Image: WOLFBOX USB C Hardwire Kit showing the main cable, power converter, and fuse tap connections.

Installation Guide

This section provides detailed instructions for installing your WOLFBOX USB C Hardwire Kit. Please read all steps carefully before beginning the installation.

Components of the Hardwire Kit

• Yellow Wire (B+): Connects to a constant power source (battery positive). This provides continuous power for parking surveillance.
• Red Wire (ACC): Connects to an accessory power source (ignition-switched). This provides power when the vehicle is on.
• Black Wire (GND): Connects to a metal part of the vehicle's chassis for grounding.

Step-by-Step Installation

1. Prepare the Vehicle:

   Stop the engine and ensure the vehicle is turned off. Locate your vehicle's interior fuse box, typically found near the dashboard or under the steering wheel. You may need to gently pry off a panel to access it.

   

   Image: A hand removing a panel to reveal the vehicle's interior fuse box.

2. Identify Power Sources:

   Use a power detector or multimeter to identify a constant power source (B+) that remains active even when the car is off, and an accessory power source (ACC) that only receives power when the ignition is on. Refer to your vehicle's fuse diagram (often on the fuse box cover) to find suitable fuses.

   Note:

   • Use an ACC power supply of 15A to 25A.
   • Use a constant power supply below 30A.
   

   Image: A detailed view of a vehicle's fuse box, showing different fuse types and locations.

3. Connect Ground Wire (Black):

   Connect the black wire (ground) to a metal part of the car's body or chassis. This provides a stable ground connection for the hardwire kit.

   

   Image: The black wire being secured to a metal ground point within the vehicle's interior.

4. Connect Power Wires (Yellow and Red):

   Connect the yellow fuse tap to the constant power source (B+) and the red fuse tap to the ACC power source. Ensure secure connections.

   

   Image: Universal Compatibility Chart illustrating various wiring methods for the hardwire kit and their corresponding dash cam behaviors (normal recording, parking guard, etc.).
5. Route the Cable:

   Carefully route the USB-C cable from the fuse box area up to your dash camera's mounting location, typically along the A-pillar and headliner to keep it hidden and tidy.

6. Connect to Dash Camera:

   Plug the USB-C end of the hardwire kit into your dash camera's power port.

Wiring Connection Methods and Functionality

The hardwire kit offers different connection methods to suit your dash camera's parking surveillance needs. Refer to the table below for details:

Table: Universal Compatibility Chart for hardwire kit connections.

Official Installation Videos

Operating Instructions

Once correctly installed, the WOLFBOX USB C Hardwire Kit will automatically manage power to your dash camera based on your chosen connection method.

Normal Operation

• While Driving: If connected to ACC power, your dash camera will power on automatically when you start your vehicle and record continuously.
• While Parked (Parking Surveillance): If connected to constant power (B+) and ACC power, the kit will enable your dash camera's parking guard function. This allows the camera to continue monitoring and recording events even when the vehicle is turned off, providing 24/7 protection. The low voltage protection feature ensures your car battery is not drained.

Image: Visual representation of the 24-hour parking monitoring feature provided by the hardwire kit.

Maintenance

To ensure optimal performance and longevity of your WOLFBOX USB C Hardwire Kit and dash camera, consider the following maintenance tips:

• Regular Cable Inspection: Periodically check the wiring for any signs of wear, fraying, or loose connections.
• Fuse Check: If your dash camera stops receiving power, inspect the fuse taps and the vehicle's fuses for any blown fuses. Replace if necessary.
• Clean Connections: Ensure all electrical connections remain clean and free from corrosion.
• SD Card Formatting: Regularly format your dash camera's SD card as recommended by the dash cam manufacturer to prevent data corruption and ensure continuous recording.

Troubleshooting

If you encounter issues with your WOLFBOX USB C Hardwire Kit, refer to the following common troubleshooting steps:

Specifications

• Product Dimensions: 1 x 1 x 1 inches
• Item Weight: 6.4 ounces
• Item Model Number: T27-L
• Connectivity Technology: USB
• Special Feature: Parking Monitor
• Color: Black
• Manufacturer: WOLFBOX
• Country of Origin: China
• Date First Available: November 15, 2022
• Included Components: Hardwire Kit

Warranty and Support

WOLFBOX is committed to providing high-quality products and excellent customer service.

Warranty Information

• Warranty Period: 12 Months Warranty
• Return Policy: 7 Days Return Policy
• Defects: Returns accepted for defects.

Customer Support

For any inquiries, technical assistance, or warranty claims, please contact WOLFBOX customer support:

• Email: service@wolfbox.com
• Phone: +1 888 296 8399

Thank you for choosing WOLFBOX. Drive on. Always on.