1. Introduction
The Babymoov Milky Now is an automatic water warmer and dispenser designed to simplify baby bottle preparation. This device provides warm water at the desired temperature quickly and hygienically, suitable for preparing formula or other hot beverages. Please read this manual carefully before first use and keep it for future reference.
2. Important Safety Instructions
- Always ensure the device is placed on a stable, flat, heat-resistant surface, away from children.
- Do not immerse the device, cord, or plug in water or any other liquid.
- Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Use only distilled or filtered water to prevent mineral buildup and ensure optimal performance.
- Keep children away from the device, especially when it is heating or dispensing hot water.
- This appliance is for household use only. Do not use outdoors.
3. Product Overview
The Babymoov Milky Now features a sleek design with intuitive controls. Key components include the water tank, control panel, and dispenser nozzle.
4. Initial Setup
- Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Placement: Place the Milky Now on a clean, dry, stable, and heat-resistant surface, away from direct sunlight or heat sources.
- Initial Cleaning: Before first use, clean the water tank and all removable parts as described in the 'Cleaning and Maintenance' section.
- Fill Water Tank: Fill the stainless steel water tank with distilled or filtered water up to the 'MAX' line.
- Power Connection: Plug the power cord into a suitable electrical outlet. The device will power on.
5. Operating Instructions
5.1. Filling the Water Tank
Ensure the water level is always between the 'MIN' and 'MAX' indicators inside the stainless steel tank. For optimal hygiene and to prevent mineral buildup, use distilled or filtered water.
5.2. Setting the Temperature
Use the control panel to select your desired water temperature. The digital screen will display the current water temperature. The device can heat water from 71°F (22°C) to 212°F (100°C).
5.3. Dispensing Water
Place a baby bottle or cup directly under the dispenser nozzle. Press the dispense button. The device is programmed to automatically dispense approximately 2 oz (60ml) of water with a single press. For continuous dispensing, press and hold the button until the desired quantity is reached.
5.4. Keep Warm Function
The Milky Now features an automatic 'keep warm' function, maintaining the set water temperature for up to 6 hours. This ensures warm water is readily available whenever needed.
5.5. Product Demonstration Video
6. Cleaning and Maintenance
6.1. Daily Cleaning
After each use, unplug the device and allow it to cool. Empty any remaining water from the tank. Wipe the exterior with a damp cloth. Rinse the stainless steel tank thoroughly with clean water.
6.2. Auto-Clean Function
To maintain a healthy and clean environment, use the 'CLEAN' function regularly. This function heats the water to 212°F (100°C) for 3 minutes, sterilizing the water channels. For enhanced cleaning, add a few drops of lemon juice to the water before activating the 'CLEAN' function.
6.3. Descaling
Depending on your water hardness, mineral deposits may accumulate over time. Regular descaling is recommended. Consult the Babymoov website or customer support for specific descaling instructions and recommended products.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on | Not plugged in; power outlet issue; device malfunction. | Ensure the power cord is securely plugged into a working outlet. Check the power switch. If the issue persists, contact customer support. |
| Water not heating to desired temperature | Incorrect temperature setting; mineral buildup; device malfunction. | Verify the temperature setting on the control panel. Perform the auto-clean function or descale the device. |
| Inconsistent water dispense volume | Air in the system; mineral buildup in dispenser. | Ensure the water tank is adequately filled. Run the auto-clean cycle to clear any blockages. |
| Water has an unusual taste or odor | Poor water quality; device needs cleaning. | Use only distilled or filtered water. Perform a thorough cleaning and auto-clean cycle. |
8. Technical Specifications
- Product Dimensions: 10 x 6.69 x 11.69 inches
- Item Model Number: A002301_US
- Material Type: Stainless Steel
- Power Source: Corded Electric
- Item Weight: 10.2 ounces
- Water Capacity: Approximately 4 cups (1.1 Liters)
- Temperature Range: 71°F (22°C) to 212°F (100°C)
9. Warranty and Customer Support
The Babymoov Instant Baby Bottle Prep Milky Now is backed by Babymoov's lifetime warranty, ensuring peace of mind for your purchase. For warranty claims, technical assistance, or any questions regarding your product, please visit the official Babymoov website or contact their customer support directly. Keep your proof of purchase for warranty validation.