Ikea 705.184.43

Ikea LÖVMÅNAD LED Table Lamp User Manual

Model: 705.184.43

Introduction

This manual provides essential information for the safe and efficient use of your Ikea LÖVMÅNAD LED Table Lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.

The Ikea LÖVMÅNAD LED Table Lamp is designed to provide adjustable illumination for various indoor settings. It features a modern design with a matte anthracite black finish, an adjustable head, and a rotary dimmer for customizable brightness.

Safety Information

  • Indoor Use Only: This lamp is intended for indoor use in dry locations. Do not expose to water or high humidity.
  • Electrical Safety: Always unplug the lamp from the power outlet before cleaning or performing any maintenance. Do not operate with a damaged cord or plug.
  • Placement: Place the lamp on a stable, flat surface to prevent tipping. Ensure the power cord is not pinched or placed under heavy objects.
  • Light Source: The LED light source in this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire shall be replaced.
  • Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Children: Keep the lamp out of reach of small children.

What's in the Box

Upon unpacking, ensure all components are present and undamaged:

  • Ikea LÖVMÅNAD LED Table Lamp Base (with integrated LED light source and power cord)

Note: No separate bulb or complex assembly parts are included as the LED is integrated.

Setup and Placement

  1. Unpack: Carefully remove the lamp from its packaging.
  2. Placement: Choose a stable, flat surface for the lamp, such as a desk, bedside table, or shelf. Ensure there is adequate space around the lamp for proper ventilation and to avoid obstruction of light.
  3. Connect Power: Insert the power plug into a suitable electrical outlet (220 Volts). The lamp is designed for corded electric operation.
Ikea LÖVMÅNAD LED Table Lamp on a desk, illuminated

Image: The Ikea LÖVMÅNAD LED Table Lamp positioned on a desk, providing focused illumination. This illustrates typical placement and the lamp's overall appearance when in use.

Ikea LÖVMÅNAD LED Table Lamp from a different angle on a desk

Image: Another view of the Ikea LÖVMÅNAD LED Table Lamp on a desk, showcasing its compact design and how it fits into a workspace environment.

Ikea LÖVMÅNAD LED Table Lamp on a bedside table

Image: The Ikea LÖVMÅNAD LED Table Lamp placed on a bedside table next to a bed, demonstrating its suitability for bedroom use. The lamp provides soft, ambient light.

Operating Instructions

  1. Power On/Off: The lamp is controlled by a rotary dimmer switch. Rotate the knob to turn the lamp on or off.
  2. Adjust Brightness: To adjust the brightness, rotate the dimmer knob clockwise to increase light intensity and counter-clockwise to decrease it. The lamp offers customizable brightness up to 400 lumens.
  3. Adjust Lamp Head: The lamp head is adjustable, allowing you to direct the light precisely where needed. Gently pivot the lamp head to your desired angle.
Close-up of the Ikea LÖVMÅNAD LED Table Lamp's adjustable head and dimmer knob

Image: A close-up view of the lamp's adjustable head mechanism and the rotary dimmer knob. This highlights the control interface for adjusting light direction and intensity.

Maintenance

  • Cleaning: Before cleaning, always unplug the lamp from the power outlet. Wipe the lamp with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these may damage the finish or electrical components.
  • Light Source: The LED light source is integrated and not designed for user replacement. If the LED fails, the entire lamp unit should be replaced.
  • Cord Inspection: Periodically inspect the power cord and plug for any signs of damage. If damaged, discontinue use and contact customer support.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.
  • Not plugged in.
  • Power outlet is not active.
  • Rotary dimmer is in the "off" position.
  • Ensure the power plug is fully inserted into a working outlet.
  • Test the outlet with another device.
  • Rotate the dimmer knob clockwise to turn the lamp on.
Light is too dim or too bright.Brightness setting needs adjustment.Rotate the dimmer knob to achieve the desired brightness level.
Lamp head does not stay in position.Joint may be loose (unlikely for new product).Ensure the lamp head is gently adjusted. If the issue persists, contact customer support.

Specifications

Model Number705.184.43
BrandIkea
Product TypeLED Table Lamp
ColorAnthracite Black
Finish TypeMatte
Dimensions (D x W x H)10D x 25W x 25H Centimeters
Base Diameter12 Centimetres
Item Weight0.9 Kilograms
Light Source TypeIntegrated LED Filament
Wattage12 Watt Hours
Luminous FluxUp to 400 Lumens
Voltage220 Volts
Power SourceCorded Electric
Switch TypeRotary Dimmer
Control MethodTouch (via dimmer)
MaterialMetal Base, Glass Shade, Polycarbonate Enclosure
Indoor/Outdoor UsageIndoor
Special FeatureDimmable

Warranty and Support

For warranty information and customer support, please refer to the purchase documentation or contact Ikea customer service directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Ikea

Importer Contact Information: DIGITAL SHOPPY

Packer Contact Information: Ikea Of Sweden

For further assistance, visit the official Ikea website or contact their customer support line.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.