Introduction
This manual provides comprehensive instructions for the proper installation and maintenance of your Suburban LP-BZMB Z-Shaped Wall Mounting Bracket. This bracket is designed to securely mount Suburban Two Stage or Automatic Changeover propane gas regulators in recreational vehicles (RVs) and motorhomes. Please read all instructions carefully before proceeding with installation to ensure safe and reliable operation.
Product Overview
The Suburban LP-BZMB Z-Shaped Wall Mounting Bracket is engineered for durability and ease of use. Its unique "Z" shape allows for efficient, space-saving installation of propane gas regulators.
Key Features:
- Secure Installation: Specifically designed for safe and secure mounting of Suburban Two Stage or Automatic Changeover regulators.
- Easy to Install: Includes all necessary mounting screws for quick and straightforward setup.
- Durable Construction: Manufactured from high-quality metal to withstand harsh RV and motorhome environments.
- Space-Saving Design: The "Z" shape optimizes space, allowing for compact installation.
What's Included:
- 1 x Suburban LP-BZMB Z Wall Mounting Bracket
- Mounting Screws
Figure 1: Front view of the Suburban LP-BZMB Z-Shaped Wall Mounting Bracket in its retail packaging.
Safety Information
WARNING: Only qualified persons should install or service LP gas regulators. Carefully read and understand all instructions prior to installation or service. Failure to follow instructions correctly can result in damage to the product, personal property, and cause serious injury or death. Do not use this bracket for any purpose other than mounting LP gas regulators. Ensure all connections for leaks with soapy water after replacing or servicing regulators. Never use a flame to check for leaks. If a leak is detected, close both cylinder valves and contact a qualified technician. Never use LP gas appliances indoors, in campers, or tents. Keep all connections clean and dirt-free.
Figure 2: Back of the product packaging displaying important safety warnings and product information.
Installation Instructions
Follow these steps to properly install your Suburban LP-BZMB Z-Shaped Wall Mounting Bracket:
- Select Mounting Location: Choose a suitable, secure wall location on your RV or motorhome for the propane regulator. Ensure the location allows for proper ventilation and access for future maintenance.
- Position the Bracket: Hold the LP-BZMB bracket against the chosen wall surface. The "Z" shape should allow the regulator to sit flush and securely once mounted.
- Mark Drill Holes: Using a pencil or marker, mark the locations for the mounting screws through the pre-drilled holes on the bracket.
- Drill Pilot Holes: Carefully drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for the included mounting screws to prevent stripping or cracking the mounting surface.
- Attach the Bracket: Align the bracket with the pilot holes and secure it to the wall using the provided mounting screws. Tighten the screws firmly but do not overtighten.
- Mount the Regulator: Once the bracket is securely attached, mount your Suburban Two Stage or Automatic Changeover regulator onto the bracket using the appropriate hardware (not included with the bracket, but typically supplied with the regulator).
- Check for Leaks: After connecting the regulator and propane lines, perform a leak test using a soapy water solution on all connections. Bubbles indicate a leak. If a leak is found, tighten connections or replace faulty components.
Figure 3: The Suburban LP-BZMB Z-Shaped Wall Mounting Bracket, ready for installation.
Maintenance
The LP-BZMB bracket requires minimal maintenance. Periodically inspect the bracket and its mounting screws for any signs of corrosion, damage, or loosening. Ensure the regulator remains securely attached to the bracket. If any issues are observed, address them promptly to maintain the safety and integrity of your propane system.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | LP-BZMB |
| Brand | Suburban |
| Material | Metal |
| Color | Yellow (Bracket finish) |
| Item Dimensions (L x W x H) | 8.38 x 3.88 x 1.7 inches |
| Item Weight | 3.2 ounces |
| Mounting Type | Wall Mount |
| UPC | 677917011902 |
Warranty and Support
For warranty information or technical support regarding your Suburban LP-BZMB Z-Shaped Wall Mounting Bracket, please contact Suburban customer service. Refer to the product packaging or the official Suburban website for the most current contact details.