AZDOME JYX05 3-Lead ACC Hardwire Kit Instruction Manual

Introduction

The AZDOME JYX05 3-Lead ACC Hardwire Kit is a power management device designed to provide continuous power to your dash camera directly from your vehicle's fuse box. This enables features such as 24-hour parking monitoring, even when the vehicle's engine is off. It intelligently converts 12V-24V vehicle power to a stable 5V/2.5A output, compatible with dash cameras utilizing a Type-C USB power connector.

This kit includes essential safety features like low voltage protection to prevent vehicle battery drain, reverse connection protection, short circuit protection, overload protection, and overtemperature protection.

Safety Information

• Always refer to your vehicle's owner's manual before modifying the electrical system.
• Avoid connecting to fuse slots that control critical safety features such as airbags, stability control programs, or engine management systems. Safe options often include fuses for the radio, sunroof, or interior lights.
• Ensure all connections are secure to prevent electrical shorts or malfunctions.
• Do not exceed the specified output current (5V/2.5A Max) to avoid damage to the hardwire kit or connected device.
• The hardwire kit is designed to operate within a working temperature range of -20℃ to 90℃.

Product Components

The AZDOME JYX05 Hardwire Kit includes the following components:

• AZDOME JYX05 3-Lead Hardwire Kit (with integrated voltage protection module and Type-C USB output)
• Various types of Add-A-Fuse taps (ACZ/Micro2, ACS/Mini, ACN/LP-Mini, ACU/ATO) to ensure compatibility with different vehicle fuse boxes.
• Fuse puller tool

Image: Overview of the AZDOME JYX05 Hardwire Kit and its included accessories.

Setup and Installation

Proper installation is crucial for the hardwire kit's functionality and your vehicle's electrical system. If you are unsure about any steps, consult a professional.

Wiring Connections

The hardwire kit features three wires that must be connected to your vehicle's fuse box:

• RED wire (BAT+): Connect to a constant fuse that provides power even when the vehicle is off. This is essential for parking mode functionality.
• YELLOW wire (ACC): Connect to an ACC (Accessory) fuse that receives power only when the vehicle's ignition is on. This allows the dash cam to automatically power on and off with the vehicle.
• BLACK wire (GND): Connect to a metal bolt or screw on the vehicle's chassis to establish a secure ground connection.

Image: Detailed wiring diagram for the hardwire kit.

Selecting Fuse Taps

The kit includes four common types of Add-A-Fuse taps (ACZ/Micro2, ACS/Mini, ACN/LP-Mini, ACU/ATO). You will need to identify the correct fuse type for your vehicle by checking your car's fuse box. Two fuse taps are needed per vehicle (one for BAT+ and one for ACC).

Image: Different types of fuse taps included for compatibility.

Low Voltage Protection Settings

The hardwire kit features an adjustable low voltage cut-off to protect your vehicle's battery from draining completely. You can select from four voltage options using the integrated switches:

• For 12V Battery Systems: 11.8V, 12.0V, 12.2V, 12.4V
• For 24V Battery Systems: 23.6V, 24.0V, 24.4V, 24.8V

The kit will automatically cut off power to the dash cam if the battery voltage drops below the selected value for more than 8 seconds, ensuring enough power remains to start your car.

Recommendation: It is recommended to start with a higher voltage setting (e.g., 12.2V for 12V systems or 24.4V for 24V systems) and test to find the optimal setting for your vehicle and driving habits. If multiple options are selected simultaneously, or no option is selected, the default cut-off is 11.8VDC for 12V batteries and 23.6VDC for 24V batteries.

Image: Low voltage protection options on the hardwire kit.

Installation Steps Overview

1. Locate your vehicle's fuse box (refer to your vehicle's manual).
2. Using a circuit tester, identify a constant power fuse slot (BAT+) and an accessory power fuse slot (ACC).
3. Select the correct type of Add-A-Fuse tap for your vehicle's fuses.
4. Crimp the red wire (BAT+) and yellow wire (ACC) of the hardwire kit onto separate Add-A-Fuse taps.
5. Insert the Add-A-Fuse taps into the identified fuse slots.
6. Connect the black wire (GND) to a suitable metal ground point on the vehicle chassis.
7. Route the Type-C USB cable to your dash camera and connect it.
8. Test the dash camera to ensure it powers on and off correctly with the ignition, and that parking mode functions as expected.

Image: Visual guide for the installation process.

Operating Instructions

Once installed, the AZDOME JYX05 Hardwire Kit operates automatically with your vehicle and dash camera.

Automatic Power On/Off

When the vehicle's ignition is turned on, the hardwire kit will supply power to the dash camera, causing it to power on and begin recording (if configured to do so). When the ignition is turned off, the hardwire kit will detect the change and, if connected correctly, allow the dash camera to transition into its parking mode (if supported by the dash cam).

Parking Mode Functionality

For 24-hour parking monitoring, ensure your dash camera has a parking mode feature that detects ACC signals. After correct hardwire kit installation, access your dash camera's menu, navigate to the "Park" settings, and enable parking monitoring. Depending on your dash cam model (e.g., AZDOME M550), it may automatically enter Time-Lapse Parking Mode, Motion Detection Parking Mode, or Collision Detection Parking Mode when the vehicle is turned off.

The hardwire kit ensures continuous power supply for these modes while actively monitoring battery voltage to prevent excessive discharge.

Maintenance

The AZDOME JYX05 Hardwire Kit is designed for reliable, long-term operation with minimal maintenance. Periodically inspect the wiring connections for any signs of wear, corrosion, or looseness. Ensure the hardwire kit module is securely mounted and not exposed to excessive heat or moisture. No user-serviceable parts are inside the module.

Troubleshooting

Specifications

Warranty and Support

AZDOME provides a 1-YEAR WARRANTY for the JYX05 Hardwire Kit. In case of any issues or questions, please contact AZDOME customer service.

• Email: service@azdomevip.com
• Phone: (833) 6675545

AZDOME is committed to providing 24/7 online customer service to ensure a satisfactory experience.