Ultralux 12 Inch Modern LED Wall Light User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ultralux 12 Inch Modern LED Matte Black Up and Down Wall Light. Please read this manual thoroughly before installation and retain it for future reference. This outdoor sconce is designed to provide efficient and aesthetically pleasing illumination for your patio, front door, or other exterior areas.

Image: Front view of the Ultralux 12 Inch Modern LED Matte Black Up and Down Wall Light, showcasing its sleek cylindrical design and matte black finish.

Safety Information

WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing.

• Always consult a qualified electrician if you are unsure about the installation process.
• Do not modify the fixture in any way. Any modifications may void the warranty and create a safety hazard.
• This fixture is designed for outdoor use and is wet location approved.
• Ensure all electrical connections are secure and comply with local electrical codes.
• Do not connect this fixture to a dimmer switch, as it is not dimmable.

Package Contents

Verify that all components are present before beginning installation:

• Ultralux 12 Inch Modern LED Wall Light Fixture (1)
• Mounting Bracket (1)
• Mounting Screws (2)
• Wire Nuts (3)

Image: Components included for installation, showing the light fixture's backplate, mounting screws, and wire nuts.

Setup and Installation

This fixture is designed for self-installation. Follow these steps carefully:

1. Turn Off Power: Locate the circuit breaker controlling the power to the desired installation location and turn it off. Verify power is off using a voltage tester.
2. Prepare Mounting Surface: Ensure the electrical box is securely mounted and clean.
3. Attach Mounting Bracket: Secure the provided mounting bracket to the electrical box using the mounting screws. Ensure the bracket is level.
4. Make Electrical Connections:
   • Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
   • Connect the green or bare copper ground wire from the fixture to the ground wire from the electrical box (or to the electrical box itself if applicable) using a wire nut.
   • Carefully tuck all wires into the electrical box.
5. Mount the Fixture: Align the fixture with the mounting bracket and secure it using the provided screws or nuts, ensuring a snug fit against the wall.
6. Restore Power: Turn the power back on at the circuit breaker. Test the light fixture.

Operating Instructions

The Ultralux LED Wall Light operates via a standard wall switch. Once installed and power is restored, simply toggle the switch to turn the light on or off.

• This fixture provides 2000 lumens of warm white light (3000K color temperature).
• The design directs light both upwards and downwards, creating an aesthetic lighting effect on your wall.

Image: Two Ultralux wall lights installed on an outdoor wall, demonstrating the up and down lighting effect that enhances the outdoor space.

Maintenance

The Ultralux LED Wall Light requires minimal maintenance.

• Cleaning: To clean the fixture, ensure power is off. Use a soft, damp cloth to wipe down the matte black finish and glass shade. Do not use abrasive cleaners or solvents, as these can damage the finish.
• LEDs: The LEDs in this fixture are integrated and non-removable. There are no bulbs to replace. The fixture has an expected lifetime of over 50,000 hours.
• Inspection: Periodically inspect the fixture for any signs of damage or loose connections.

Image: Close-up view of the integrated LED array within the fixture, highlighting that no bulbs need replacement.

Troubleshooting

Specifications

Image: Graphic detailing key technical specifications including color temperature, lumens, dimmability, wet location suitability, warranty, and lifetime.

Image: Diagram illustrating the precise dimensions of the Ultralux 12 Inch Wall Light, including height, width, and depth from the wall.

Warranty and Support

Manufacturer Warranty: This Ultralux product is covered by a 5-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

What is Covered: Repair or replacement of defective parts or the entire fixture at the manufacturer's discretion.

What is Not Covered: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or acts of nature. Normal wear and tear is also not covered.

To Obtain Warranty Service: Please contact Ultralux customer support with your proof of purchase and a description of the issue. Do not attempt to repair the fixture yourself.

For further assistance or inquiries, please visit the official Ultralux store or contact their customer service department.

Ultralux Store: https://www.amazon.com/stores/UltraLux/page/62E57D1D-C0CC-4A28-810F-65F315597BF0