1. Introduction
Thank you for purchasing the Coby Digital Alarm Clock with Bluetooth Speaker, Model CCR101BK. This device combines a digital alarm clock with a powerful Bluetooth 5.0 speaker, a large LED mirror display, and a rechargeable battery. It allows you to stream music, listen to podcasts, and answer calls wirelessly. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Product Overview
2.1 Package Contents
- Coby Digital Alarm Clock (CCR101BK)
- USB Charging Cable
- User Manual
2.2 Device Layout
Figure 1: Front View. This image displays the front of the Coby Digital Alarm Clock, featuring its large LED time display and reflective mirror finish. Indicators for Bluetooth, battery, and alarm are visible below the time.
Figure 2: Top View. This image shows the top panel of the alarm clock, highlighting the control buttons: Volume Down (-), Power/Play/Pause, and Volume Up (+). The speaker grille is also visible.
2.3 Controls and Indicators
| Component | Function |
|---|---|
| LED Display | Shows time, alarm status, Bluetooth status, and battery level. |
| Power/Play/Pause Button | Press and hold to power on/off. Press to play/pause music or answer/end calls. |
| Volume Up (+) Button | Increase volume. Long press for next track. |
| Volume Down (-) Button | Decrease volume. Long press for previous track. |
| USB Charging Port | Connect for power and to charge the internal battery. |
| Bluetooth Indicator (BT) | Flashes when pairing, solid when connected. |
| Battery Indicator | Shows current battery level and charging status. |
| Alarm Indicator | Illuminates when an alarm is set. |
3. Setup
3.1 Initial Charging
Before first use, fully charge the alarm clock. Connect the provided USB charging cable to the USB charging port on the back of the device and to a standard USB power adapter (not included). The battery indicator on the display will show charging status and turn solid when fully charged. A full charge typically takes approximately 3-4 hours.
3.2 Setting the Time
- Press and hold the Power/Play/Pause button for 3 seconds to turn on the device.
- Press and hold the Power/Play/Pause button again for 2 seconds to enter time setting mode. The hour digits will flash.
- Use the Volume Up (+) and Volume Down (-) buttons to adjust the hour.
- Press the Power/Play/Pause button once to confirm the hour and move to minute setting. The minute digits will flash.
- Use the Volume Up (+) and Volume Down (-) buttons to adjust the minutes.
- Press the Power/Play/Pause button once more to confirm the minutes and exit time setting mode.
3.3 Setting the Alarm
- Press the Power/Play/Pause button twice quickly to enter alarm setting mode. The alarm hour digits will flash, and the alarm indicator will appear.
- Use the Volume Up (+) and Volume Down (-) buttons to adjust the alarm hour.
- Press the Power/Play/Pause button once to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
- Use the Volume Up (+) and Volume Down (-) buttons to adjust the alarm minutes.
- Press the Power/Play/Pause button once more to confirm the alarm minutes and exit alarm setting mode. The alarm indicator will remain lit, indicating the alarm is active.
- To deactivate the alarm, press the Power/Play/Pause button twice quickly again. The alarm indicator will disappear.
- When the alarm sounds, press any button to snooze for 9 minutes. To turn off the alarm completely, press and hold the Power/Play/Pause button.
4. Operating Instructions
4.1 Bluetooth Pairing
- Ensure the alarm clock is powered on. The Bluetooth indicator (BT) on the display will flash, indicating it is in pairing mode.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "CCR101BK" from the list of devices.
- Once connected, the Bluetooth indicator (BT) will become solid, and you will hear an audible confirmation.
- The device is now ready to stream audio from your paired device.
Note: The alarm clock will automatically attempt to reconnect to the last paired device when powered on.
4.2 Music Playback
- Press the Power/Play/Pause button to play or pause music.
- Press and hold the Volume Up (+) button to skip to the next track.
- Press and hold the Volume Down (-) button to go to the previous track.
- Press the Volume Up (+) or Volume Down (-) buttons to adjust the volume.
4.3 Answering Calls
- When a call comes in, the music will pause. Press the Power/Play/Pause button to answer the call.
- To end a call, press the Power/Play/Pause button again.
- To reject an incoming call, press and hold the Power/Play/Pause button for 2 seconds.
4.4 Adjusting Display Brightness
The LED display brightness can be adjusted. While the clock is displaying the time, short press the Power/Play/Pause button to cycle through different brightness levels (e.g., Bright, Medium, Dim, Off). Select the desired brightness level.
4.5 FM Radio Function
This device includes an FM radio. To access the FM radio:
- Press the Power/Play/Pause button three times quickly to switch to FM radio mode. The display will show the frequency.
- Press and hold the Power/Play/Pause button for 2 seconds to auto-scan and save available FM stations.
- Use the Volume Up (+) and Volume Down (-) buttons to navigate between saved stations.
- To exit FM radio mode, press the Power/Play/Pause button three times quickly again to return to Bluetooth mode or clock display.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or abrasive materials.
- Storage: Store the device in a cool, dry place when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device regularly, even if not in constant use.
- Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Device does not power on. | Ensure the device is charged. Connect it to a power source using the USB cable. |
| Bluetooth not connecting. |
|
| No sound or low volume. |
|
| Alarm does not sound. |
|
| Display is too dim or too bright. | Short press the Power/Play/Pause button to cycle through brightness levels. |
7. Specifications
Figure 3: Product Dimensions. This image illustrates the physical dimensions of the Coby Digital Alarm Clock, indicating a width of 6 inches and a height of 4 inches.
| Feature | Detail |
|---|---|
| Model Number | CCR101BK |
| Connectivity | Bluetooth 5.0 |
| Display Type | Large LED Mirror Display |
| Power Source | Rechargeable Battery, USB Powered |
| Product Dimensions | Approximately 6" W x 4" H |
| Item Weight | 10.9 Ounces |
| Frame Material | Plastic, Metal |
| Special Features | Alarm Clock, Powerful Speaker, Hands-free Calling, FM Radio |
8. Safety Information
- Do not expose the device to water or moisture.
- Do not disassemble or attempt to repair the device yourself. Refer all servicing to qualified personnel.
- Keep the device away from heat sources, open flames, and direct sunlight.
- Dispose of the battery according to local regulations. Do not dispose of batteries in fire.
- Use only the provided or recommended charging cables and adapters.
9. Warranty and Support
Coby products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official Coby website. Please retain your proof of purchase for warranty claims.
Coby Official Website: www.cobyusa.com
