YING RAY A2-2022110710(T-B16)

Download PDF
Contents

YING RAY Replacement Remote Control Instruction Manual

Model: A2-2022110710(T-B16)

Introduction

This manual provides instructions for the YING RAY replacement remote control, model A2-2022110710(T-B16). This remote is designed to operate various Twin Star Electric Fireplace Heater models. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your remote control.

Compatible Models Include:

  • 32II040FGL-SA01, 3211040FGL-SA01
  • 18II040FGL-C001, 1811040FGL-C001
  • 18WM90504, 18II040FGL-C, 1811040FGL-C
  • 18II040FGL-C005, 1811040FGL-C005
  • 26II040FSL-S, 26II040CGL-S, 28II040FGL-S, 28II040FSL-S, 28II040CGL-S
  • 32II040FGL-S, 32II040FSL-S, 32II040CGL-S, 33II040FGL-S, 33II040FSL-S
  • 33II040CGL-S, 3311040CGL-S, 32II040FGL-L, 3211040FGL-L
  • 28II040FGL-SA01, 2811040FGL-SA01, 32II040FGL-SA00, 3211040FGL-SA00

Product Overview

The YING RAY replacement remote control features a straightforward design for easy operation of your electric fireplace heater. It includes dedicated buttons for power, flame settings, fan speed, and timer functions.

Front view of the YING RAY replacement remote control, showing buttons for Power, Flame, Speed, and Timer, along with up/down arrows.

Image: Front view of the remote control. This image displays the layout of the control buttons, including POWER, FLAME, SPEED, TIMER, and directional arrows for adjustment. The model identifier (T-B16) is visible at the bottom.

Setup

1. Battery Installation

The remote control requires two AAA batteries (not included). Follow these steps to install them:

  1. Locate the battery compartment cover on the back of the remote control.
  2. Press down on the tab and slide the cover downwards to remove it.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Back view of the YING RAY remote control with the battery compartment open, showing where to insert AAA batteries.

Image: Battery compartment. This image shows the back of the remote control with the battery cover removed, revealing the empty battery slots for two AAA batteries and their polarity markings.

2. Initial Use

Once batteries are installed, the remote control is ready for use. No pairing is typically required for this replacement unit; it should function directly with compatible Twin Star Electric Fireplace Heaters.

Operating Instructions

Point the remote control directly towards the electric fireplace heater's receiver. Ensure there are no obstructions between the remote and the fireplace.

  • POWER: Press to turn the fireplace heater ON or OFF.
  • FLAME: Press to cycle through different flame brightness settings or to turn the flame effect ON/OFF.
  • SPEED: Press to adjust the fan speed for heat distribution. Multiple settings may be available.
  • TIMER: Press to set the operating timer for the fireplace. Use the Up and Down arrow buttons to adjust the timer duration.
  • Up/Down Arrows (▲ / ▼): These buttons are typically used to adjust settings such as temperature, flame intensity, or timer duration, depending on the active function.

Maintenance

Battery Replacement

Replace batteries when the remote's range decreases or if it stops responding. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.

Troubleshooting

  • Remote not responding:
    • Check if the batteries are installed correctly with the correct polarity.
    • Replace old batteries with new ones.
    • Ensure there is a clear line of sight between the remote and the fireplace receiver.
    • Confirm the remote is compatible with your specific fireplace model.
  • Limited range:
    • Replace batteries.
    • Ensure no strong light sources or electronic devices are interfering with the signal.

Specifications

Model NumberA2-2022110710(T-B16)
Package Dimensions0.39 x 0.2 x 0.08 inches
Item Weight1.06 ounces
ManufacturerZHUHAI YINGRAY TRADING CO., LTD.
Included ComponentsRemote Control

Warranty

This product comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper battery installation.

Support

If you encounter any issues not covered in this manual or require further assistance, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt for warranty claims.

© 2024 YING RAY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.