Yaheetech Metal Bed Frame YA-00118473 Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Bed Frame, model YA-00118473. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This bed frame is designed for a 140 x 200 cm mattress.

Image 1.1: Assembled Yaheetech Metal Bed Frame.

2. Safety Information

• Keep all packaging materials away from children.
• Assemble the bed frame on a soft, clean surface to prevent scratches.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the bed frame or use it as a ladder.
• Maximum weight capacity: 272 kg. Do not exceed this limit.
• Use only the recommended mattress size (140 x 200 cm) to ensure proper fit and stability.

3. Package Contents

Before assembly, verify that all components are present and undamaged. Refer to the parts list provided in your packaging. If any parts are missing or damaged, contact customer support.

Image 3.1: Diagram showing the dimensions of the bed frame. Overall dimensions are approximately 207.5 cm (length) x 146 cm (width) x 102.5 cm (headboard height). The footboard height is 67 cm. The bed is designed for a 140 x 200 cm mattress.

Image 3.2: Product details highlighting anti-slip rubber feet to protect floors, a stable metal frame for high load capacity and durability, and powder coating for long service life.

Image 3.3: Product details illustrating strong and solid metal legs for stability, a retro-style headboard for elegance, and 32.5 cm of ground clearance for storage space.

4. Setup / Assembly Instructions

Assembly typically requires two adults. Follow the numbered steps in your included assembly guide. Ensure all parts are correctly oriented before tightening screws.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface.
2. Assemble Headboard and Footboard: Attach the decorative elements and vertical bars to the main headboard and footboard frames using the provided hardware.
3. Connect Side Rails: Attach the side rails to the assembled headboard and footboard. Ensure the U-shaped corner plates are correctly aligned for structural stability.
4. Install Center Support Legs: Secure the central support legs to the bed frame. These provide additional stability and weight distribution.
5. Place Slatted Base: Lay the metal slatted base onto the side rails. The built-in slats are designed to prevent the mattress from sliding.
6. Tighten All Fasteners: Once all parts are in place, systematically tighten all bolts and screws. Do not overtighten.
7. Final Check: Ensure the bed frame is stable and level.

Image 4.1: Illustration of U-shaped corner plates enhancing structural stability and built-in slats preventing mattress sliding.

Image 4.2: Diagram showing the multi-point support structure, indicating sturdy and stable construction with a 272 kg weight bearing capacity.

5. Operating Instructions

Once assembled, the bed frame is ready for use.

• Mattress Placement: Carefully place your 140 x 200 cm mattress onto the slatted base. The design ensures the mattress remains securely in place.
• Under-Bed Storage: The bed frame offers approximately 32.5 cm of ground clearance, providing space for storage boxes or other items.

Image 5.1: Close-up view illustrating the 32.5 cm ground clearance, ideal for under-bed storage.

6. Maintenance

• Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the powder coating.
• Fastener Check: Periodically (e.g., every 3-6 months) check all bolts and screws and re-tighten them to ensure the bed frame remains stable and secure.
• Movement: When moving the bed frame, lift it rather than dragging it to prevent damage to the frame or your flooring.

7. Troubleshooting

• Squeaking Noises: If the bed frame squeaks, check all connections and tighten any loose bolts. Ensure the mattress is properly seated on the slats.
• Instability/Wobbling: Verify that all legs are making firm contact with the floor and that all fasteners are fully tightened. Ensure the bed frame is on a level surface.
• Mattress Sliding: The built-in slats are designed to prevent sliding. If your mattress still slides, ensure it is the correct size (140 x 200 cm) and that the slats are properly installed.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact Yaheetech directly through their official website or the retailer where the product was purchased. Please have your model number (YA-00118473) and purchase date available when contacting support.