1. Introduction
Thank you for choosing the ETA Blade Master Multi-Groomer. This versatile 5-in-1 device is designed for comprehensive personal grooming, offering solutions for hair, beard, nose/ears, and body shaving. Featuring a 3.2V Li-ion battery, it provides cordless convenience and efficient performance. Please read this manual thoroughly before first use to ensure safe and optimal operation.
The ETA Blade Master simplifies beard grooming, allowing for both smooth shaves and precise beard styling. This versatile device functions as a shaver, beard trimmer, hair clipper, and ear/nose trimmer. The specialized body shaver head provides a smooth shave while minimizing skin irritation. The trimmer is suitable for use across the entire body, including chest, abdomen, and sensitive areas, providing precise grooming. A 60-minute operating time supports comprehensive grooming sessions. Achieve salon-quality hairstyles at home. The ETA Blade Master can be used with or without the hair comb attachment. The comb allows for length adjustments from 1 mm to 10 mm in 0.5 mm increments, enabling precise styling.
2. Product Components
The ETA Blade Master Multi-Groomer comes with several interchangeable heads and accessories to cater to various grooming needs.
- Main Groomer Unit
- Small Cutting Head (for beard and hair)
- Adjustable Comb Attachment (1-10mm)
- Shaving Head
- Nose, Ear, and Eyebrow Trimmer Head
- Body Hair Removal Head
- Cleaning Brush
- Storage Stand
- USB Charging Cable
- Lubricating Oil
Image 2.1: The ETA Blade Master Multi-Groomer main unit with all its interchangeable heads and accessories displayed.
Image 2.2: A closer view of the various interchangeable grooming heads included with the device.
3. Setup and Charging
3.1 Initial Charge
Before first use, fully charge the device. Connect the USB charging cable to the groomer and a suitable USB power adapter (not included). The charging indicator will illuminate. A full charge takes approximately 2 hours, providing up to 60 minutes of cordless operation.
3.2 Attaching/Detaching Heads
To attach a head, align the head with the main unit and push gently until it clicks into place. To detach, firmly grasp the head and pull it away from the main unit. Ensure the device is turned off before changing heads.
Image 3.1: The main body of the ETA Blade Master Multi-Groomer, showing the charging port and power button.
4. Operating Instructions
The ETA Blade Master is suitable for both wet and dry use, thanks to its IPX5 waterproof rating. Always ensure your skin is clean before grooming.
4.1 Using the Small Cutting Head (Beard & Hair Trimmer)
- Attach the small cutting head to the main unit.
- For beard trimming, you can use it without the comb for precise edging or attach the adjustable comb for desired length.
- To adjust the length, rotate the dial on the comb attachment to select a setting between 1mm and 10mm in 0.5mm increments.
- For hair clipping, move the trimmer against the direction of hair growth for an even cut.
Image 4.1: Detailed view of the small cutting head, ideal for beard and hair trimming.
Image 4.2: The adjustable comb attachment, showing the length setting dial from 1mm to 10mm.
4.2 Using the Shaving Head
- Attach the shaving head.
- Hold the shaver at a right angle to your skin and move it gently against the direction of hair growth.
- This head is designed for a close, smooth shave on the face or body.
4.3 Using the Nose, Ear, and Eyebrow Trimmer Head
- Attach the nose, ear, and eyebrow trimmer head.
- Gently insert the trimmer tip into your nostril or ear canal. Move it in a circular motion to trim unwanted hair.
- For eyebrows, carefully guide the trimmer along the desired line.
Image 4.3: The specialized head for trimming nose, ear, and eyebrow hair.
4.4 Using the Body Hair Removal Head
- Attach the body hair removal head.
- This head is suitable for trimming and shaving body hair on areas such as the chest, abdomen, and armpits.
- Move the head gently over the skin, ensuring full contact for effective hair removal.
Image 4.4: The body shaver head designed for smooth and irritation-free body grooming.
5. Maintenance and Cleaning
Regular cleaning and maintenance will prolong the life of your ETA Blade Master Multi-Groomer and ensure optimal performance.
5.1 Cleaning the Heads
- After each use, turn off the device and detach the head.
- Use the provided cleaning brush to remove any trapped hairs from the blades and comb attachments.
- Since the device is IPX5 waterproof, you can rinse the heads under running water. Ensure they are completely dry before reattaching or storing.
5.2 Lubrication
- Periodically apply a small drop of the provided lubricating oil to the blades of the cutting heads.
- Turn on the device for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and smooth operation.
5.3 Storage
Store the groomer and its accessories in the provided storage stand or a dry, safe place away from direct sunlight and extreme temperatures.
Image 5.1: The ETA Blade Master Multi-Groomer stored neatly in its dedicated stand, keeping all accessories organized.
6. Troubleshooting
If you encounter any issues with your ETA Blade Master, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or no charge. | Charge the device fully (approx. 2 hours). |
| Poor trimming/shaving performance. | Blades are dull, dirty, or not lubricated. | Clean the blades thoroughly and apply lubricating oil. If performance does not improve, consider replacing the head. |
| Device stops during use. | Battery is depleted. | Recharge the device. |
| Skin irritation after shaving. | Incorrect technique or sensitive skin. | Ensure skin is clean and moisturized. Use gentle strokes. Consider using the device wet with shaving foam/gel. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
- Model Name: ETA Blade Master
- Model Number: ETA034190000
- Power Source: Battery Powered
- Battery Type: 3.2V Li-ion
- Charging Time: Approximately 2 hours
- Operating Time: Up to 60 minutes
- Waterproof Rating: IPX5 (Wet & Dry use)
- Blade Material: Stainless Steel
- Adjustable Comb Lengths: 1-10 mm (in 0.5 mm increments)
- Color: Black
8. Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your product or visit the official ETA website. Keep your proof of purchase for any warranty claims.
For further assistance or inquiries, please contact ETA customer service through their official channels.
