Introduction
Thank you for choosing the BOWERY HILL Square Farmhouse Wood Coffee Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new coffee table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The BOWERY HILL Square Farmhouse Wood Coffee Table, showcasing its rustic brown wood top and black metal frame.
Safety Information
- Two-Person Assembly: Due to the weight and size of the table (approximately 88 pounds), assembly by two adults is strongly recommended to prevent injury and ensure proper handling.
- Stable Surface: Assemble the table on a soft, clean, and level surface to prevent scratches or damage to the product and your flooring.
- Hardware Safety: Keep all small parts and packaging materials away from children and pets to avoid choking hazards.
- Secure Connections: Ensure all bolts and screws are securely tightened before using the table. Periodically check and re-tighten hardware as needed.
- Weight Limit: Do not overload the table or its lower shelf. Distribute weight evenly.
- Avoid Climbing: Do not allow children to climb or stand on the table.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Tabletop (Solid Acacia Wood)
- Lower Shelf (Solid Acacia Wood)
- Metal Frame Components
- Assembly Hardware (Bolts, Washers, Nuts, etc.)
- Assembly Tool (e.g., Allen Wrench - check packaging)
Note: Specific quantities of hardware may vary. Refer to the included hardware pack for exact counts.
Assembly Instructions
Tools Required (Not Included):
- Screwdriver
- Wrench (if not provided with hardware)
Recommended:
- Two people for assembly.
- A soft, clean surface (e.g., carpet or blanket) to protect components during assembly.
Step-by-Step Guide:
- Unpack and Identify: Carefully remove all components from the packaging. Lay them out on your protected work surface. Identify each part and compare it with the package contents list.
- Assemble the Metal Frame: Connect the metal frame components using the provided bolts and washers. Do not fully tighten the bolts at this stage; leave them slightly loose to allow for adjustments.
- Attach the Lower Shelf: Secure the lower acacia wood shelf to the assembled metal frame. Ensure it is properly aligned before gently tightening the corresponding hardware.
- Attach the Tabletop: Place the main acacia wood tabletop onto the top of the metal frame. Align the pre-drilled holes and secure it with the remaining hardware.
- Final Tightening: Once all components are assembled and aligned, gradually tighten all bolts and screws until they are firm. Avoid overtightening, which can strip threads or damage materials.
- Inspect: Carefully inspect the assembled table to ensure all connections are secure and the table is stable.

Image: The assembled coffee table positioned in a living room, demonstrating its functional use.
Usage
The BOWERY HILL Square Farmhouse Wood Coffee Table is designed for indoor use in living rooms or sitting areas. Its spacious top surface provides ample space for beverages, books, and decorative items, while the lower open shelf offers additional storage or display opportunities.
- Place the table on a level surface to prevent wobbling.
- Distribute weight evenly across the tabletop and lower shelf.
- Use coasters under drinks to protect the wood surface from moisture rings.
- Avoid placing hot items directly on the wood surface without protection.

Image: A close-up view of the coffee table's surface with a tray and cups, highlighting its practical use.
Care and Maintenance
Proper care will help maintain the appearance and longevity of your coffee table.
- Wood Surfaces:
- Wipe spills immediately with a soft, dry cloth.
- Clean with a damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Protect from direct sunlight and extreme temperature changes to prevent warping or fading.
- Periodically apply a wood conditioner or polish suitable for rustic wood finishes.
- Metal Frame:
- Wipe with a soft, damp cloth.
- Avoid abrasive cleaners or pads that could scratch the finish.
- General:
- Regularly check and tighten all hardware to ensure stability.
- Do not drag the table; lift it when moving to prevent damage to legs and flooring.

Image: A detailed view of the distressed acacia wood surface and the industrial-style metal frame, highlighting the materials.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Loose hardware; uneven floor. | Ensure all bolts and screws are securely tightened. Move the table to a level surface or use furniture glides/pads to stabilize. |
| Scratches or marks on wood. | Impact or abrasive contact. | For minor scratches, a wood repair marker or polish may help. Use coasters and avoid dragging objects across the surface. |
| Difficulty during assembly. | Incorrect part orientation; missing hardware. | Review the assembly instructions carefully. Ensure parts are oriented correctly. Contact customer support if hardware is missing. |
Specifications
- Brand: BOWERY HILL
- Model Name: Square Farmhouse Wood Coffee Table
- Model Number: BH-4752-2617785
- Dimensions (D x W x H): 35" x 35" x 18"
- Item Weight: Approximately 88 Pounds
- Material: Solid Acacia Wood (top, shelf), Metal (frame)
- Finish: Rustic Brown (wood), Industrial Steel (metal frame)
- Style: Modern Rustic, Farmhouse
- Assembly Required: Yes (2 people recommended)
- Indoor/Outdoor Usage: Indoor
- Number of Shelves: 1 (lower open shelf)

Image: A diagram illustrating the dimensions of the coffee table: 35 inches deep, 35 inches wide, and 18 inches high.
Warranty Information
For detailed warranty information regarding your BOWERY HILL Square Farmhouse Wood Coffee Table, please refer to the product description on the original purchase platform or visit the official BOWERY HILL store page. Warranty terms and conditions may vary.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact BOWERY HILL customer support through the retailer where the product was purchased or visit the official BOWERY HILL website for contact information.
We are committed to ensuring your satisfaction with our products.