Introduction
Thank you for choosing PHI Villa Outdoor Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read it thoroughly before use and retain it for future reference.
Important Safety Information:
- MAXIMUM WEIGHT CAPACITY: 300 lbs (136 kg). Do not exceed this limit.
- Always ensure the anti-slip feet are properly installed and in contact with the ground to prevent accidents.
- Ensure all bolts are securely tightened before use.
Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Swivel Bar Stool Components (for 2 chairs)
- Hardware Pack (bolts, washers, nuts, Allen wrench)
- Graphic Assembly Instructions
Image 1: Two assembled PHI Villa Outdoor Swivel Bar Stools.
Setup and Assembly
Assembly is required for these bar stools. While detailed written instructions may not be provided, a graphic assembly guide is included in your package. Please follow the visual steps carefully. For optimal stability and ease of assembly, it is recommended to have two people for this process.
General Assembly Tips:
- Organize Parts: Lay out all components and hardware. It is common for an extra piece of each hardware type to be included.
- Do Not Fully Tighten Immediately: When attaching multiple bolts for a section (e.g., legs, armrests), hand-tighten all bolts first. This allows for minor adjustments to align holes. Once all bolts are in place, then fully tighten them with the provided tools or your own (a ratchet set with a 10mm socket can be helpful).
- Leveling: After assembly, if the chair rocks, loosen the bolts slightly, sit on the chair to settle the frame, and then re-tighten. The anti-slip feet can also be adjusted for minor leveling on uneven surfaces.
Image 2: Detailed dimensions of the PHI Villa Outdoor Swivel Bar Stool.
Operating Instructions
360° Swivel Function:
Your PHI Villa bar stools are equipped with a smooth 360-degree swivel mechanism. This allows for easy rotation and flexibility, enhancing your comfort and convenience in various outdoor settings.
Image 3: The 360-degree swivel function allows for full rotation.
Comfortable Seating:
The ergonomic design, wide seat, and circular footrest provide enhanced comfort and stability. The armrests are designed for relaxed seating.
Image 4: Ergonomic back and smooth armrests contribute to comfortable seating.
Placement:
These counter-height stools are suitable for outdoor bars, patios, gardens, and poolside areas. Their weather-resistant properties also make them versatile for indoor use.
Video 1: Demonstration of PHI Villa Swivel Bar Chairs in a patio setting.
Maintenance
To ensure the longevity and appearance of your PHI Villa bar stools, follow these maintenance guidelines:
- Cleaning: Wipe clean with a damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Fabric Care: The Textile fabric is quick-drying, waterproof, and UV-resistant. Regular cleaning helps maintain its appearance and properties.
- Frame Care: The rustproof metal frame with anti-rust coating is designed for outdoor elements. Inspect the frame periodically for any signs of wear or damage and address them promptly.
- Hardware Check: Periodically check all bolts and nuts to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
Image 5: High-density Textilene fabric is quick-drying, breathable, anti-fading, and easy to clean.
Image 6: The powder E-coating frame provides rust resistance, stability, and durability.
Troubleshooting
If you encounter any issues with your bar stools, refer to the following common solutions:
- Chair Rocks/Unstable: This is often due to uneven tightening during assembly or an uneven surface. Try loosening all frame bolts slightly, sit on the chair to distribute weight evenly, and then re-tighten all bolts. Adjust the anti-slip feet if your floor is uneven.
- Swivel Mechanism Stiff: Ensure no debris is obstructing the swivel plate. A small amount of silicone-based lubricant can be applied to the mechanism if needed, but avoid oil-based lubricants that can attract dirt.
- Parts Not Aligning During Assembly: Do not fully tighten any bolts until all corresponding parts are loosely assembled. This flexibility allows for proper alignment. If holes still do not align, double-check that you are using the correct parts for each step as per the graphic instructions.
Specifications
| Feature | Detail |
|---|---|
| Model Number | E02GF138 |
| Material | Metal frame, Textilene fabric |
| Color | Brown |
| Product Dimensions (L x W x H) | 19.5 x 19.5 x 49 inches |
| Seat Height | 26.8 inches |
| Item Weight | 22.1 pounds (per chair) |
| Weight Capacity | 300 lbs (136 kg) |
| Special Features | Arm Rest, Foot Rest, Heavy Duty, Wide Seat, 360° Swivel |
| Care Instructions | Wipe Clean |
Warranty and Support
Warranty information for PHI Villa products is typically provided at the point of purchase or within the product packaging. Please refer to any included documentation for specific warranty terms and conditions.
For further assistance, missing parts, or support, please contact PHI VILLA customer service. You can also visit the official PHI VILLA Store on Amazon.
