FAGOR Robot Vacuum Cleaner FGG3722 User Manual

1. Introduction

Thank you for choosing the FAGOR Robot Vacuum Cleaner FGG3722. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new robot vacuum. Please read this manual thoroughly before using the product and retain it for future reference.

Figure 1.1: FAGOR Robot Vacuum Cleaner FGG3722 and its self-emptying station.

2. Important Safety Instructions

To reduce the risk of injury or damage, read these safety instructions carefully before setting up, using, and maintaining your robot. Keep this manual in a safe place for future reference.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Only use the original power adapter provided with the product. Using a different adapter may cause damage or fire.
• Do not operate the robot in areas with open flames, flammable liquids, or explosive materials.
• Ensure the charging station is placed on a level surface against a wall, with adequate clear space around it.
• Before use, remove any loose cables, small objects, or fragile items from the cleaning area to prevent entanglement or damage.
• Do not immerse the robot or charging station in water or other liquids.
• Do not touch the power plug or the robot with wet hands.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

3. Package Contents

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact customer support.

• FAGOR Robot Vacuum Cleaner FGG3722
• Self-Emptying Charging Station
• Power Adapter (EU Plug)
• User Manual
• Side Brushes (pre-installed or separate)
• HEPA Filter (pre-installed or separate)

4. Product Overview

4.1 Robot Vacuum Components

Figure 4.1: Top view of the FAGOR Robot Vacuum Cleaner FGG3722.

• Power/Clean Button: Press to start or pause cleaning. Hold to power on/off.
• Home/Recharge Button: Press to send the robot back to the charging station.
• Dustbin: Located under the top cover, collects debris.
• Bumper: Detects obstacles.
• Cliff Sensors: Prevents the robot from falling down stairs.
• Charging Contacts: Connects with the charging station for power.
• Main Brush: Central brush for deep cleaning.
• Side Brushes: Sweeps debris from edges and corners.
• Driving Wheels: Allows movement across various surfaces.
• Universal Wheel: Provides directional control.

4.2 Self-Emptying Charging Station

Figure 4.2: Front view of the FAGOR Self-Emptying Charging Station.

• Charging Contacts: Connects with the robot for charging.
• Dust Collection Port: Extracts debris from the robot's dustbin.
• Dust Bag Compartment: Houses the disposable dust bag for collected debris.
• Power Indicator: Shows charging status.

5. Setup

5.1 Placing the Charging Station

1. Choose a location for the charging station on a hard, level surface against a wall.
2. Ensure there is at least 1 meter (3 feet) of clear space to the front and 0.5 meters (1.5 feet) to the sides of the charging station.
3. Plug the power adapter into the charging station and then into a wall outlet (EU plug).
4. Make sure the power cord is not tangled or obstructing the robot's path.

5.2 Initial Charge

1. Place the robot vacuum onto the charging station, ensuring the charging contacts align.
2. The power indicator on the charging station will illuminate, and the robot will begin charging.
3. Allow the robot to charge completely before its first use. This typically takes several hours.

Figure 5.1: Robot vacuum docking with the charging station.

5.3 App Connection (Optional)

For enhanced control and smart features, you can connect your FAGOR Robot Vacuum to a compatible smart home application. The robot supports integration with Google Home and Amazon Alexa.

1. Download the relevant smart home app (e.g., Google Home or Amazon Alexa app) on your smartphone.
2. Follow the in-app instructions to add a new device and connect your FAGOR Robot Vacuum.
3. Ensure your robot and smartphone are connected to the same Wi-Fi network during the setup process.

6. Operating Instructions

6.1 Starting and Pausing Cleaning

• Manual Start: Press the Power/Clean button on the robot once to start cleaning.
• Manual Pause: Press the Power/Clean button again to pause cleaning.
• App Control: Use the connected smart home app to start, pause, or stop cleaning remotely.

6.2 Cleaning Modes

The FGG3722 offers various cleaning modes to suit different needs:

• Auto Cleaning: The robot intelligently navigates and cleans your entire floor area. This is the default mode.
• Edge Cleaning: The robot cleans along walls and furniture edges. Activate this mode via the app.
• Spot Cleaning: The robot focuses on a specific dirty area, cleaning in a spiral pattern. Activate this mode via the app.

6.3 Scheduling

You can schedule cleaning times using the smart home app. This allows the robot to automatically clean at your preferred times, even when you are not home.

6.4 Special Features

• Anti-Collision: Built-in sensors detect obstacles, allowing the robot to navigate around furniture and walls without impact.
• Anti-Fall: Cliff sensors prevent the robot from falling down stairs or off ledges.
• Self-Emptying: Upon returning to the charging station, the robot automatically empties its dustbin into the station's larger dust bag, reducing manual emptying frequency.
• Programmable: Customize cleaning schedules and modes via the connected app.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum.

7.1 Emptying the Robot's Dustbin

Although the robot features self-emptying, it is recommended to periodically check and manually empty the robot's internal dustbin (capacity 230 ml) to ensure no blockages.

1. Open the top cover of the robot.
2. Remove the dustbin.
3. Open the dustbin and empty its contents into a trash bin.
4. Rinse the dustbin with water if necessary (ensure it is completely dry before reinserting).

7.2 Cleaning the HEPA Filter

The HEPA filter should be cleaned regularly to maintain suction power.

1. Remove the dustbin from the robot.
2. Take out the HEPA filter from the dustbin.
3. Tap the filter gently over a trash bin to remove dust and debris. Do not wash the HEPA filter with water.
4. Reinsert the clean filter and dustbin. Replace the HEPA filter every 3-6 months, depending on usage.

7.3 Cleaning Brushes

Periodically check and clean the main brush and side brushes for tangled hair or debris.

• Main Brush: Remove the brush cover and the main brush. Use the cleaning tool (if provided) or scissors to cut and remove tangled hair.
• Side Brushes: Gently pull off the side brushes. Remove any hair or debris. Reattach them securely.

7.4 Cleaning Sensors and Charging Contacts

Wipe the cliff sensors, anti-collision sensors, and charging contacts on both the robot and the charging station with a clean, dry cloth to ensure proper function.

7.5 Replacing the Dust Bag in the Charging Station

When the dust bag in the self-emptying station is full, replace it with a new one. The app or an indicator light on the station may notify you.

1. Open the dust bag compartment on the charging station.
2. Carefully remove the full dust bag and dispose of it.
3. Insert a new dust bag, ensuring it is properly seated.
4. Close the compartment cover.

8. Troubleshooting

If you encounter issues with your robot vacuum, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included in your package or contact FAGOR customer service. Keep your purchase receipt as proof of purchase.

Information regarding spare parts availability is currently not provided. Please contact customer support for inquiries about replacement parts.