1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and safety of your Aivituvin Wooden Dog House, Model AIR76. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. This dog house is designed for both outdoor and indoor use, offering a secure and comfortable shelter for your pet.
2. Safety Information
- Always ensure all screws and fasteners are securely tightened during assembly and periodically check for tightness during use.
- Place the dog house on a level, stable surface to prevent tipping.
- Regularly inspect the dog house for any signs of damage or wear, especially to the wooden components and iron frame. Repair or replace damaged parts immediately.
- Keep small children away from the assembly area.
- Ensure adequate ventilation if used indoors.
- The dog house is designed for pets. Do not allow humans to climb on or inside the structure. The roof can support up to 180 pounds, but this is for structural integrity, not human occupancy.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Wooden Panels (Walls, Floor, Roof sections)
- Iron Frame Components
- Plastic Waterproof Feet Pads
- Plastic Door Flaps
- Hardware Pack (Screws, bolts, hinges, latch)
- Assembly Tools (Basic wrench/screwdriver may be included, but a Phillips head screwdriver and hammer are recommended)
- Instruction Manual
4. Assembly Instructions
Assembly typically requires one adult and can be completed within approximately 30 minutes. All screw holes are pre-aligned for ease of installation. Refer to the included diagrams for visual guidance.
- Unpack and Identify Parts: Carefully unpack all components and lay them out. Identify each part using the labels (e.g., A, B, C for structural components, P1, P2 for screw packages).
- Attach Iron Frame to Panels: Begin by attaching the iron frame components to the wooden panels. The unique all-around iron frame design provides enhanced durability and prevents chewing.
- Assemble Side Walls: Connect the side wall panels to the front and back panels using the provided hardware. Ensure all connections are secure.
- Install Floor: Insert the removable floor panels into the designated slots. These panels are designed for easy removal for cleaning and feature additional support rails.
- Attach Roof: Secure the asphalt-covered roof sections. The roof is constructed with three layers (wood for insulation, asphalt for waterproofing, gravel for heat resistance) to provide weather protection.
- Install Feet Pads: Attach the customized plastic waterproof feet pads to the bottom of the dog house legs. These raise the house off the ground, protecting it from moisture.
- Attach Door Flaps: Install the clear plastic door flaps from the inside using the supplied screws. These provide an additional barrier against the elements.
- Final Check: Verify that all screws are tightened and the structure is stable.
Image: A person reviewing the detailed assembly instructions provided with the dog house.
Image: Diagram illustrating the robust strong iron frame construction of the Aivituvin dog house compared to a less durable galvanized edge.
Image: The dog house with its roof lifted to show the interior and the removable floor panels, highlighting the all-around iron frame.
5. Operating Instructions
The Aivituvin Wooden Dog House is designed to provide a comfortable and secure environment for your dog.
- Placement: Choose a location that offers additional protection from extreme weather, such as under an overhang or in a sheltered corner. Ensure the ground is level.
- Comfort: Add a comfortable bed or blanket inside the dog house to enhance your pet's comfort, especially during colder months.
- Acclimation: Introduce your dog to the new house gradually. You can place treats or familiar toys inside to encourage them to enter.
- Weather Protection: The weatherproof design, including the asphalt roof and raised feet, offers protection from rain and moisture. The plastic door flaps further help to keep the interior dry and insulated.
Image: A corgi dog happily positioned at the entrance of the Aivituvin dog house, demonstrating its use in an outdoor setting.
Image: A diagram highlighting the weatherproof features of the dog house, including the 3-layer roof and plastic feet pads, ensuring protection from elements.
6. Maintenance and Care
Regular maintenance will extend the life of your dog house and ensure a healthy environment for your pet.
- Cleaning: The removable floor panels allow for easy cleaning of the interior. Remove the panels, sweep out debris, and wipe down surfaces with a pet-safe cleaner. Allow to dry completely before reinserting.
- Exterior Cleaning: Wipe down the exterior wood and metal frame with a damp cloth. Avoid harsh chemicals that could damage the wood finish or be harmful to your pet.
- Inspection: Periodically check all screws and fasteners for tightness. Inspect the wood for cracks or splinters and the iron frame for rust or damage. Address any issues promptly.
- Roof Care: Ensure the asphalt roof remains intact and free of debris to maintain its waterproofing capabilities.
7. Troubleshooting
- Issue: Dog is hesitant to use the house.
Solution: Place familiar bedding, toys, or treats inside. Allow time for your pet to adjust. - Issue: Water accumulation inside the house.
Solution: Ensure the dog house is on a level surface. Check that the roof is properly installed and undamaged. Verify plastic feet pads are correctly attached to raise the house from ground moisture. Ensure door flaps are installed. - Issue: Loose or wobbly structure.
Solution: Re-tighten all assembly screws. Inspect for any damaged wooden panels or bent iron frame components. - Issue: Pet chewing on wooden parts.
Solution: The all-around iron frame is designed to deter chewing. If chewing occurs on exposed wood, consider applying a pet-safe bitter spray or providing alternative chew toys.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Aivituvin |
| Model Name | AIR76 |
| ASIN | B0BLSDKCVQ |
| Outer Dimensions (L x W x H) | 43.3" x 29.4" x 33.4" |
| Internal Dimensions (L x W x H) | 38.2" x 24.4" x 25.6" |
| Entrance Size (H x W) | 21.8" x 15" |
| Item Weight | 64.4 pounds |
| Material | Natural Fir Wood, Metal Frame |
| Color | Brown |
| Special Feature | Weather Resistant, Removable Floor, All-Around Iron Frame |
| Breed Recommendation | Small, Medium, and Large Breeds (up to 150 lbs) |
Image: Detailed diagram illustrating the outer and inner dimensions of the dog house, including the entrance size.
9. Warranty Information
The Aivituvin Wooden Dog House (Model AIR76) comes with a 5-year warranty. This warranty covers manufacturing defects and material flaws under normal use and maintenance. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please contact Aivituvin customer support.
10. Customer Support
For any questions, assistance with assembly, troubleshooting, or warranty inquiries, please contact Aivituvin customer support through the following channels:
- Visit the official Aivituvin Store on Amazon: Aivituvin Store
- Refer to the contact information provided with your purchase documentation.
