Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your BOUSNIC Replacement Receiver for Dog Training Collar models RS2A and RS2B. Please read this manual thoroughly before use to ensure safe and effective operation.
Image: The BOUSNIC Replacement Receiver for Dog Training Collar, including the receiver unit and an adjustable collar strap.
Setup
Package Contents
Each package contains one replacement receiver unit and one adjustable collar strap.
Installing the Collar Strap
- Secure the buckle onto one end of the collar strap.
- Thread the collar strap through the designated slots on the receiver unit. Ensure the receiver is oriented correctly.
- Thread the strap through the tri-glide slide.
- Thread the strap through the lock buckle.
- Thread the strap through the tri-glide slide again to secure the position and adjust the length.
Video: This video demonstrates the step-by-step process of installing the collar strap onto the receiver unit.
Pairing the Receiver with the Remote
Before initial use, the receiver must be paired with your existing BOUSNIC remote control. Follow these steps:
- Turn on both the remote control and the receiver unit.
- On the receiver, quickly press the on/off button 3 times in a row. You will hear a beep, indicating successful pairing.
- Press a mode button on the remote (e.g., beep, vibrate) to confirm the connection. The receiver should respond accordingly.
Video: This video illustrates how to pair the BOUSNIC receiver with its remote control.
Fitting the Collar
Adjust the collar strap to ensure a snug but comfortable fit around your dog's neck. The contact points on the receiver should make direct contact with your dog's skin. Ensure there is enough space to fit two fingers comfortably between the strap and your dog's neck.
Operating the Receiver
The receiver works in conjunction with your BOUSNIC remote control to deliver various training modes. Refer to your remote control's manual for detailed instructions on selecting modes and adjusting intensity levels.
Available Modes (via Remote)
- Beep Mode: Emits an audible tone as a warning or command.
- Vibration Mode: Delivers a non-harmful vibration. Intensity levels are typically adjustable on the remote.
- Static Stimulation Mode: Provides a static pulse. Intensity levels are typically adjustable on the remote. Use this mode responsibly and at the lowest effective setting.
Always begin training with the lowest intensity setting for any mode and gradually increase if necessary, observing your dog's reaction. The goal is to get your dog's attention, not to cause distress.
Maintenance
- Cleaning: Clean the receiver and collar strap with a damp cloth as needed. Ensure the charging port cover is securely closed before cleaning.
- Storage: Keep the receiver dry and store it away from extreme temperatures.
- Battery: The receiver contains a Lithium Ion battery. Ensure it is charged regularly to maintain optimal performance.
Troubleshooting
If you experience issues with your BOUSNIC Replacement Receiver, consider the following:
- Receiver not responding: Ensure both the remote and receiver are fully charged and powered on. Re-attempt the pairing process as described in the 'Setup' section.
- No stimulation/vibration: Check that the contact points are making proper contact with your dog's skin. Ensure the intensity level on the remote is not set to zero.
- Short battery life: Ensure the receiver is fully charged before each use. Battery life can vary based on usage frequency and mode intensity.
For further assistance, please refer to the 'Support' section.
Specifications
| Feature | Detail |
|---|---|
| Brand | BOUSNIC |
| Model | RS2A, RS2B (Replacement Receiver) |
| Package Dimensions | 3.54 x 3.15 x 1.73 inches |
| Item Weight | 4.23 ounces |
| Batteries | 1 Lithium Ion battery (included) |
| Color | Black |
| Material | Nylon |
| Included Components | Receiver, Strap |
| Animal Collar Type | Electronic Training Collar |
| Target Species | Dog |
| Breed Recommendation | Large |
| Age Range Description | All life stages |
| Product Care Instructions | Keep dry, avoid extreme temperatures, clean with a damp cloth as needed. |
| UPC | 750918003302 |
| ASIN | B0BLS9C1JQ |
Warranty Information
Specific warranty details for the BOUSNIC Replacement Receiver are not provided in this document. Please refer to the product packaging or contact BOUSNIC customer support for comprehensive warranty information. A 30-day return/replacement policy is typically available for this product.
Support
For technical support, troubleshooting assistance, or any questions regarding your BOUSNIC Replacement Receiver, please contact BOUSNIC customer support. Contact information can typically be found on the product packaging or the official BOUSNIC website.