AIPER Seagull SE Robotic Pool Cleaner User Manual

1. Introduction

Thank you for choosing the AIPER Seagull SE Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.

2. Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before operating the appliance.
• Do not operate the cleaner if the power cord or plug is damaged.
• Ensure the charging port is dry before charging.
• Do not allow children to play with the cleaner.
• Only use attachments recommended or sold by the manufacturer.
• Do not operate the cleaner if it is damaged in any way.
• Do not immerse the charging adapter in water.
• Store the cleaner in a cool, dry place away from direct sunlight when not in use.

3. Package Contents

Verify that all items are present in the package:

• AIPER Seagull SE Robotic Pool Cleaner x1
• Power Adapter x1
• Retrieval Hook x1
• User Manual x1
• Brushes x2
• Spare Wheels x2

Image: Contents of the AIPER Seagull SE package, showing the robotic cleaner, power adapter, retrieval hook, user manual, two brushes, and two spare wheels.

4. Setup

4.1 Charging the Cleaner

Before first use, fully charge the robotic pool cleaner. The 4000 mAh lithium-polymer battery requires approximately 2.5 hours for a full charge.

1. Ensure the cleaner is dry and clean before charging.
2. Connect the power adapter to the charging port on the cleaner.
3. Plug the adapter into a power outlet.
4. The LED indicators will show the charging status.

Image: The AIPER Seagull SE robotic pool cleaner is shown plugged into a wall outlet with its power adapter, highlighting its quick 2.5-hour charging capability.

4.2 Initial Assembly (if required)

The Seagull SE is designed for minimal assembly. If any components like brushes or wheels are not pre-installed, attach them according to the diagrams in the quick start guide provided in the package.

5. Operating Instructions

5.1 Placing the Cleaner in the Pool

Once fully charged, gently lower the cleaner into your pool. Ensure it sinks to the bottom completely before activation.

Image: The AIPER Seagull SE robotic pool cleaner is shown floating on the surface of a swimming pool, ready for operation.

5.2 One-Click Activation

The Seagull SE features simple one-click activation. Press the power button located on the top of the unit to begin the cleaning cycle.

Image: A person's finger is shown pressing the activation button on the top of the AIPER Seagull SE, demonstrating its one-click operation.

5.3 Cleaning Cycle and Runtime

The cleaner will automatically navigate and clean the pool floor. It offers up to 90 minutes of runtime on a full charge, ensuring thorough cleaning for pools up to 80 m2.

Image: An overhead view of a round pool with the AIPER Seagull SE cleaner positioned in the middle, illustrating its 90-minute cleaning duration.

5.4 Self-Parking Technology

When the battery is low or a cleaning cycle is complete, the Seagull SE will automatically park itself near the pool wall for easy retrieval.

Image: Two AIPER Seagull SE robotic pool cleaners are depicted in a pool, illustrating their self-parking function as they move towards the pool's edge.

5.5 Retrieving the Cleaner

Use the provided retrieval hook to safely lift the cleaner out of the water. Avoid pulling it out by the handle alone, especially when full of water.

Image: A person is shown using a specialized hook to carefully lift the AIPER Seagull SE robotic pool cleaner out of the swimming pool.

5.6 LED Indicators

The cleaner is equipped with four LED indicators that communicate its status:

• Solid Blue: Operating / Fully Charged
• Flashing Blue: Charging
• Solid Red: Low Battery
• Flashing Red: Error / Malfunction

6. Maintenance

6.1 Cleaning the Filter Tray

Regularly clean the filter tray to maintain optimal cleaning performance. It is recommended to clean the filter after each use.

1. Remove the cleaner from the pool.
2. Open the cleaner's cover to access the filter tray.
3. Remove the filter tray.
4. Rinse the filter tray thoroughly with a hose to remove all debris.
5. Reinsert the clean filter tray and close the cover securely.

Image: A person's hands are shown rinsing the filter tray of the AIPER Seagull SE robotic pool cleaner with a garden hose, demonstrating the ease of cleaning.

6.2 General Cleaning and Storage

Wipe down the exterior of the cleaner with a soft cloth. Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures, especially during off-season.

7. Troubleshooting

If you encounter issues with your AIPER Seagull SE, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

9.1 Warranty Information

The AIPER Seagull SE Robotic Pool Cleaner comes with a full 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact AIPER customer service. We offer 24/7 customer support and have a repair center in the EU for quick responses and solutions.

Visit the official AIPER website for contact details and further support resources.