Babymoov Nutribaby+ Loft

Babymoov Nutribaby+ 6-in-1 Multifunction Baby Food Maker Instruction Manual

Model: Nutribaby+ Loft

1. Introduction

The Babymoov Nutribaby+ is a versatile 6-in-1 multifunction baby food maker designed to simplify meal preparation for infants and families. This appliance combines steaming, blending, defrosting, reheating baby food jars, sterilizing, and warming baby bottles into one compact unit. Please read this manual carefully before first use to ensure safe and optimal operation.

2. Important Safety Instructions

  • Always ensure the appliance is placed on a stable, flat, heat-resistant surface.
  • Do not immerse the electrical unit, cord, or plug in water or any other liquid.
  • Unplug the appliance from the outlet when not in use and before cleaning.
  • Keep out of reach of children. This appliance is not a toy.
  • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
  • Use only accessories recommended by the manufacturer.
  • Exercise extreme caution when handling hot steam or hot liquids.
  • Ensure the lid is properly closed before operating the blending function.
  • The appliance features an automatic shut-off for safety.

3. Product Overview

The Nutribaby+ combines multiple functions to assist with baby food preparation and feeding.

Babymoov Nutribaby+ 6-in-1 Multifunction Baby Food Maker

Figure 3.1: Overview of the Babymoov Nutribaby+ appliance, showcasing its compact design and dual steaming and blending units.

Key Features:

  • 6-in-1 Functionality: Steam, blend, defrost, reheat baby food jars, sterilize, and warm baby bottles.
  • Simultaneous Operation: Steam and blend at the same time for efficiency.
  • Large Capacity: 2.2L total capacity (1.5L for steaming, 0.7L for blending) allows for batch cooking.
  • Adjustable Blending: Three blending speeds to achieve desired food consistency for different weaning stages.
  • Nutrient Preservation: Two separate steaming baskets ensure optimal cooking and nutrient retention.
  • Intuitive Control: Touch control panel with integrated timer, audible and visual alarms, and automatic shut-off.
Nutribaby+ control panel with 6 function icons

Figure 3.2: The control panel displaying the six pre-programmed functions: steam, blend, sterilize, bottle warmer, reheat baby food, and defrost.

Nutribaby+ control panel with alarms and temperature selection

Figure 3.3: Detailed view of the control panel, highlighting the descaling alarm, water level alarm, integrated timer, automatic shut-off, and temperature selection options.

4. Setup

4.1 Unpacking

Carefully remove all components from the packaging. Retain packaging for future storage or transport. Verify that all included components are present:

  • Main unit (steamer and blender bases)
  • Two separate steaming baskets
  • Blender jug with blade assembly
  • Lids for steaming baskets and blender jug
  • Cooking water reservoir
  • Power adapter
  • Spatula

4.2 Initial Cleaning

Before first use, wash all removable parts (steaming baskets, blender jug, lids, cooking water reservoir, spatula) with warm soapy water. Rinse thoroughly and dry. The electrical unit should only be wiped with a damp cloth.

4.3 Assembly

  1. Place the main unit on a stable, flat surface.
  2. Ensure the cooking water reservoir is correctly seated in the steaming base.
  3. Place the steaming baskets onto the steaming base as desired.
  4. Attach the blender jug to the blending base, ensuring it is securely locked in place.
  5. Connect the power adapter to the appliance and then to a suitable electrical outlet (220V).

5. Operating Instructions

5.1 Steaming Function

  1. Fill the cooking water reservoir with the appropriate amount of water (refer to markings for guidance).
  2. Chop ingredients (fruits, vegetables, meat, fish, eggs, cereals) into small, uniform pieces.
  3. Place ingredients into the steaming baskets. You can use both baskets simultaneously for different foods.
  4. Place the lids on the steaming baskets.
  5. Select the steaming function on the control panel. Adjust the cooking time if necessary.
  6. The appliance will automatically shut off and emit an alarm when steaming is complete.

5.2 Blending Function

  1. After steaming, transfer cooked ingredients to the blender jug.
  2. Add a small amount of cooking water from the reservoir or breast milk/formula to achieve desired consistency.
  3. Securely close the blender jug lid.
  4. Select the blending function on the control panel. Choose from 3 speed settings to adjust texture.
  5. Blend in short pulses (5 seconds on, 5 seconds off) to avoid overheating the motor.
Nutribaby+ steaming and blending simultaneously

Figure 5.1: The Nutribaby+ operating with both steaming and blending functions active, demonstrating simultaneous meal preparation.

Different food textures for various baby ages

Figure 5.2: Examples of food consistencies achievable with the blender, suitable for 4-6 months (smooth puree), 6-8 months (slightly textured), and 8-12 months (chunky).

5.3 Other Functions (Defrost, Reheat, Sterilize, Bottle Warmer)

Each of these functions can be selected directly from the control panel. Follow the on-screen prompts or refer to the detailed instructions in the full user manual for specific timings and procedures for each function.

  • Defrost: Place frozen food in a suitable container within a steaming basket.
  • Reheat Baby Food Jars: Place baby food jars in a steaming basket.
  • Sterilize: Place bottles, teats, or small accessories in a steaming basket.
  • Bottle Warmer: Place baby bottles in a steaming basket.

6. Care and Maintenance

6.1 Cleaning

  • Always unplug the appliance before cleaning.
  • All removable components (steaming baskets, blender jug, lids, cooking water reservoir, spatula) are dishwasher safe.
  • The main electrical unit should be wiped clean with a damp cloth. Do not immerse in water.
  • The blender blade is made of stainless steel and can be removed for thorough cleaning. Use a bottle brush for hard-to-reach areas.

6.2 Descaling

Over time, mineral deposits (limescale) may build up in the heating element. The appliance features a descaling alarm to notify you when descaling is needed. To descale:

  1. Mix 100ml of white vinegar with 100ml of water.
  2. Pour the mixture into the cooking water reservoir.
  3. Run a steaming cycle for 10-15 minutes without food.
  4. Empty the reservoir and rinse thoroughly with clean water.
  5. Repeat if necessary until the descaling alarm clears.

7. Troubleshooting

ProblemPossible CauseSolution
Appliance does not turn on.Not plugged in; power outlet issue; damaged cord.Check power connection; try a different outlet; contact customer support if cord is damaged.
Steaming function not working.Insufficient water in reservoir; limescale buildup.Fill water reservoir to appropriate level; perform descaling procedure.
Blender not operating.Blender jug not securely attached; lid not closed properly; motor overheated.Ensure jug is locked in place; close lid securely; allow motor to cool down before resuming.
Food not blending smoothly.Too little liquid; too much food; incorrect speed setting.Add more cooking water/liquid; reduce food quantity; try a higher blending speed.
Descaling alarm persists.Limescale not fully removed.Repeat descaling procedure.

8. Technical Specifications

  • Brand: Babymoov
  • Model Name: Nutribaby+ Loft
  • Product Type: 6-in-1 Multifunction Baby Food Maker
  • Color: White
  • Product Dimensions (D x W x H): 39.4 x 7.6 x 31.4 cm
  • Item Weight: 3.8 Kilograms
  • Wattage: 500 Watts (heating)
  • Voltage: 220 Volts (AC)
  • Power Source: Corded Electric
  • Bowl Capacity: 1.5 Liters (steaming), 0.7 Liters (blending)
  • Number of Speeds: 3 (blender)
  • Special Feature: Automatic Shut-off
  • Material: Plastic (Tritan, BPA-free, polypropylene), Stainless Steel (blade)
  • Care Instructions: Hand wash recommended for electrical parts, removable parts are dishwasher safe.
  • ASIN: B01MDP9NQ2
  • GTIN: 03661276146891
Nutribaby+ dimensions

Figure 8.1: Product dimensions of the Babymoov Nutribaby+.

9. Warranty and Support

9.1 Warranty Information

Babymoov offers a lifetime warranty on this product. To activate the lifetime warranty, product registration is required within 2 months of purchase. Please visit the official Babymoov website for registration details and terms and conditions.

9.2 Customer Support

For technical assistance, spare parts, or warranty claims, please contact Babymoov customer support through their official website or the contact information provided with your purchase. Products are also repairable to extend their lifespan, supporting sustainability.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.