WantJoin Beverage Dispenser with Stand, 2-Gallon (8 Liters) Model GZD002 Instruction Manual

Introduction

Thank you for choosing the WantJoin Beverage Dispenser. This manual provides essential information for the safe and efficient use of your new 2-gallon (8-liter) beverage dispenser. Please read these instructions carefully before assembly and operation, and retain them for future reference.

Image: The WantJoin Beverage Dispenser, ready for use.

Product Overview

The WantJoin Beverage Dispenser is designed for serving a variety of hot and cold drinks, featuring a durable construction and user-friendly design.

• Ice Core System: Keeps beverages chilled without dilution. The stainless steel ice core and base maintain drink temperature without watering down the contents.
• Leak-Proof Design: Equipped with a rubber sealing ring in the spigot to prevent leaks and maintain a clean serving area.
• Large Capacity: A 2-gallon (8-liter) capacity provides approximately 33 cups (8oz each), reducing the need for frequent refills. Features a spacious lid for easy refilling and cleaning, and a clear acrylic container to monitor drink levels.
• Hot & Cold Compatible: The thickened PC container is designed to withstand temperatures from -40°F to 275°F, suitable for both hot and cold beverages.
• Durable Construction: Made with premium materials including a stainless steel lid, ice core, and base, a food-grade PC container, and a rust-free PP spigot.

Image: Dual ice chambers for temperature maintenance.

Image: Large capacity and wide opening for convenience.

Package Contents

Verify that all components are present and undamaged upon unpacking:

• 1 x Acrylic Beverage Container (2-Gallon)
• 1 x Stainless Steel Lid
• 1 x Stainless Steel Ice Core
• 1 x Stainless Steel Base
• 1 x PP Spigot with Rubber Sealing Ring

Setup Instructions

1. Install Spigot: Ensure the rubber sealing ring is correctly placed on the spigot. Insert the spigot into the designated hole at the bottom of the acrylic container and secure it tightly from the inside with the provided nut.
2. Assemble Base: Place the acrylic container onto the stainless steel base. The base is designed to provide stability and elevate the spigot for easy dispensing.
3. Insert Ice Core: Place the stainless steel ice core into the center of the acrylic container. This core can be filled with ice to keep your beverage cold without diluting it.
4. Place Lid: Cover the dispenser with the stainless steel lid.

Image: Spigot assembly details.

Video: Visual guide to assembling the beverage dispenser, including spigot installation and component placement.

Operating Instructions

1. Prepare Beverage: Pour your desired beverage (juice, lemonade, iced tea, sangria, etc.) into the large acrylic container.
2. Add Ice (Optional): Fill the central stainless steel ice core with ice cubes if you wish to keep the beverage cold without diluting it. For hot beverages, the ice core should remain empty.
3. Dispense: Place a glass under the spigot. Push the spigot lever down to dispense the beverage. Release the lever to stop the flow.

Video: Demonstration of filling the dispenser and using the spigot.

Video: Overview of the beverage dispenser's features and operation.

Video: Quick demonstration of the dispenser's functionality.

Maintenance & Cleaning

Proper maintenance ensures the longevity and hygiene of your beverage dispenser.

• Disassembly: For thorough cleaning, disassemble the dispenser by removing the lid, ice core, and detaching the acrylic container from the base. The spigot can also be removed for detailed cleaning.
• Cleaning: Hand wash all components with warm, soapy water. Rinse thoroughly and dry completely before reassembly or storage.
• Care: Avoid using abrasive cleaners or scouring pads, as these can scratch the acrylic and stainless steel surfaces.
• Dishwasher Safety: The product is listed as dishwasher safe, but hand washing is recommended for optimal care and longevity of all components.

Troubleshooting

• Leaking Spigot: If the spigot leaks, ensure the rubber sealing ring is properly seated and the nut is tightened securely. Over-tightening is not necessary and may damage components.
• Slow Dispensing: Check if the spigot is fully open. For beverages with pulp, ensure the spigot is clear of any blockages.

Specifications

Warranty & Support

The WantJoin Beverage Dispenser comes with a one-year warranty from the date of purchase. For any issues, questions, or concerns, please contact our customer service for one-on-one support. We are committed to ensuring your satisfaction with our product.