1. Product Overview
This VECELO 5-piece dining table set is designed for dining areas, living rooms, or apartments. It includes one dining table and four chairs, providing a functional and stylish solution for seating up to four individuals. The set features a durable construction with an eco-friendly MDF board tabletop and a sturdy steel supporting frame.
The chairs are designed with an oval pattern on the backrest and thick leather seat pads for comfort. Each chair has a weight capacity of 350 pounds.
Image 1.1: The VECELO 5-Piece Dining Table Set arranged in a kitchen environment.
2. Safety Information
Please read all instructions carefully before assembly and use. Retain this manual for future reference.
- Ensure all components are present and undamaged before beginning assembly.
- Assemble the product on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the material.
- Periodically check and retighten all fasteners to ensure stability.
- Do not stand on the table or chairs.
- Distribute weight evenly on the tabletop.
- Keep small parts away from children during assembly.
3. Package Contents
Verify that all the following components are included in your package:
- 1x Dining Table
- 4x Dining Chairs
- 1x Instruction Manual (this document)
- 1x Accessory Bag (containing hardware for assembly)
4. Product Dimensions
Refer to the diagram below for detailed product dimensions:
Image 4.1: Detailed dimensions of the dining table and chairs.
- Table Size: 43.3"L x 27.5"W x 29.9"H
- Chairs Size: 17.5"L x 15.3"W x 35"H
- Chairs Seat Size: 15.7"L x 15.7"H
- Height of Chair Seat: 18.5"H
5. Assembly Instructions
Assembly of this dining set is designed to be straightforward. An adult can typically complete the assembly within an hour by following the provided instructions.
5.1 Before You Begin
- Clear a spacious area for assembly.
- Lay out all parts and hardware. Refer to the parts list in the accessory bag to ensure everything is accounted for.
- Have a Phillips head screwdriver and an Allen wrench (usually included) ready.
5.2 Table Assembly Steps
- Attach the table legs to the tabletop using the provided bolts and washers. Do not fully tighten yet.
- Connect the crossbars between the table legs.
- Once all components are loosely assembled, place the table upright and gently tighten all bolts evenly until secure.
5.3 Chair Assembly Steps
- Attach the backrest to the seat frame using the designated screws.
- Attach the front legs to the seat frame.
- Attach the rear legs to the seat frame.
- Connect any cross supports between the legs.
- Ensure the chair is level, then fully tighten all screws. Repeat for all four chairs.
Image 5.1: The assembled dining table set in a dining room setting.
6. Operating Instructions
The VECELO 5-piece dining table set is designed for everyday use in various home environments. Once assembled, the set is ready for immediate use.
- Place the table and chairs on a flat, stable surface.
- Ensure chairs are fully pushed in when not in use to prevent tripping hazards.
- Avoid placing excessively hot items directly on the tabletop without protection.
- Do not drag the table or chairs across the floor; lift them to move to prevent damage to the product and flooring.
Image 6.1: The dining table set ready for use with place settings.
7. Maintenance and Care
Proper care will extend the life and appearance of your dining set.
- Cleaning the Tabletop: Wipe the MDF tabletop with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cleaning the Chairs: For the leather seat pads, wipe with a damp cloth and mild soap if necessary. For the steel frame, use a soft, dry cloth.
- Spills: Clean spills immediately to prevent staining, especially on the tabletop.
- Fasteners: Periodically check all bolts and screws and tighten them as needed to maintain structural integrity.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or damage to materials.
8. Troubleshooting
If you encounter any issues with your VECELO dining table set, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chairs are wobbly | Loose fasteners or uneven floor. | Ensure all bolts and screws are fully tightened. Adjust floor levelers if present, or place shims under legs on uneven surfaces. |
| Difficulty assembling parts | Incorrect orientation of parts or overtightened screws. | Review the assembly diagrams carefully. Loosen any overtightened screws and re-align parts before tightening. |
| Scratches on tabletop | Sharp objects or abrasive cleaning. | Use placemats or coasters. Clean with soft cloths only. Minor scratches may be reduced with furniture polish (test in an inconspicuous area first). |
If the problem persists, please contact VECELO customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | VECELO |
| Model Name | 5 Pieces table Sets, 43.3" Dining Table & Chairs for 4, Industrial Counter Height |
| Model Number | KHD-MX-TC12-BLK-BC08 |
| Color | Black |
| Material | Engineered Wood (MDF), Metal |
| Table Dimensions (L x W x H) | 43.3" x 27.5" x 29.9" |
| Chair Dimensions (L x W x H) | 17.5" x 15.3" x 35" |
| Chair Seat Height | 18.5" |
| Chair Weight Capacity | 350 pounds per chair |
| Assembly Required | Yes |
| Item Weight | 69.9 pounds |
| UPC | 810110780422 |
10. Warranty and Support
VECELO provides customer support for any issues or inquiries regarding your product. If you encounter any problems with the product you received, or require assistance with assembly or parts, please contact our professional after-sales team.
Contact Email: support@vecelo.com
Please have your model number (KHD-MX-TC12-BLK-BC08) and purchase information ready when contacting support.
