Introduction
The Yunbaoit Visual Analog Timer is a practical time management tool designed for both children and adults. It features a unique visual countdown mechanism that helps individuals with time perception, task completion, and overcoming procrastination. Its silent operation makes it ideal for quiet environments such as classrooms, offices, and homes.
Front view of the Yunbaoit Visual Analog Timer in yellow, showing the white dial with numbers 0-60 and a yellow visual disk set to approximately 15 minutes.
Product Features
- Visual Countdown: A 60-minute visual timer with a disappearing colored disk that indicates the passage of time.
- Silent Operation: Designed to operate without loud ticking, making it suitable for sound-sensitive environments.
- Adjustable Alarm: Features an alarm with adjustable duration (3 or 60 seconds) and volume (low or loud).
- Battery Powered: Requires 2 AAA batteries (not included) for portability and ease of use.
- Compact Design: Small and durable, ideal for various settings including classrooms, offices, kitchens, and homes.
A central image of the yellow timer with surrounding circular images depicting various use cases: Kitchen, School, Office, Homework, Game, and Nap. Product dimensions are also shown.
Setup
- Battery Installation: Open the battery compartment on the back of the timer. Insert 2 AAA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
- Remove Insulating Piece: If present, pull out the small insulating piece from the battery compartment or knob area before first use.
- Set Alarm Preferences: On the back of the timer, locate the switches for alarm duration (3 seconds or 60 seconds) and volume (Low or Loud). Adjust these settings according to your preference.
A view of the back of the yellow timer, showing the battery compartment requiring 2 AAA batteries (not included) and switches for alarm duration (3 or 60 seconds) and volume (Low or Loud). A "TIPS" section advises pulling out the insulating piece and turning the knob clockwise then back to '0' to turn off the alarm.
Operating Instructions
- Setting the Timer: To set the timer, turn the central knob clockwise past the 60-minute mark. This action winds the internal mechanism.
- Adjusting Countdown Time: After winding, turn the knob counter-clockwise to your desired countdown time. The yellow (or colored) disk will appear, indicating the set duration.
- Visual Countdown: As time elapses, the colored disk will gradually disappear in a counter-clockwise direction, providing a clear visual representation of remaining time.
- Alarm Activation: When the colored disk completely disappears and the set time has expired, the alarm will sound according to your chosen duration and volume settings.
- Turning Off the Alarm: To stop the alarm, turn the central knob clockwise slightly, then immediately turn it back to the '0' position.
A hand turning the central knob of the yellow visual timer to set the countdown. The image illustrates the "Easy to use" aspect.
A three-panel illustration demonstrating the visual timer's operation: 1. Timer set to 55 minutes. 2. 20 minutes later, the yellow disk has reduced. 3. When time expires, the disk is gone, and an alarm icon appears.
Maintenance
- Cleaning: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Battery Replacement: Replace batteries when the timer's functionality diminishes or the alarm becomes weak. Always use new AAA batteries.
- Storage: Store the timer in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer does not count down or disk does not move. | Timer not properly wound; insulating piece still in place; dead batteries. | Ensure you turn the knob clockwise past 60 minutes to wind it. Remove any insulating pieces. Replace batteries. |
| Alarm does not sound or is too quiet. | Alarm volume set to 'Low'; dead batteries. | Check the alarm volume switch on the back and set it to 'Loud'. Replace batteries. |
| Timer makes a slight clicking sound. | Normal operation of the mechanical timer. | This is normal. The timer is designed to be quiet but may produce minimal mechanical sounds. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | B0BLHGXL39 |
| Color | Yellow |
| Dimensions (W x H x D) | 3.14" x 3.14" x 1.57" (7.98 cm x 7.98 cm x 3.99 cm) |
| Item Weight | 3.52 ounces (99.79 grams) |
| Maximum Countdown Time | 60 minutes |
| Power Source | 2 x AAA Batteries (not included) |
| Alarm Settings | 3 or 60 seconds duration, Low or Loud volume |
Warranty and Support
Yunbaoit is committed to providing satisfactory solutions for any issues you may encounter with our products. While a specific warranty period is not detailed, if you experience any problems with your Yunbaoit Visual Analog Timer, please contact our customer support team. We are dedicated to assisting you and ensuring your satisfaction.
For support, please refer to the contact information provided on the product packaging or the official Yunbaoit store page on Amazon: Yunbaoit Store.
