LEHMANN Sargo

LEHMANN Cordless Window Cleaner Sargo Instruction Manual

Model: Sargo

Introduction

Thank you for choosing the LEHMANN Sargo Cordless Window Cleaner. This manual provides essential information for the safe and efficient use of your device. Please read these instructions carefully before first use and keep them for future reference.

Important Safety Instructions

  • Read all instructions before using the appliance.
  • This appliance is for household use only. Do not use it for commercial purposes.
  • Keep the appliance away from children and pets.
  • Do not immerse the appliance in water or other liquids.
  • Use only the charger supplied with the appliance.
  • Do not operate the appliance if it is damaged or malfunctioning. Contact customer support.
  • Ensure the charging port is dry before connecting the charger.
  • Do not use abrasive cleaning agents or solvents on the appliance.
  • Always empty the dirty water tank after each use.

Product Overview

Familiarize yourself with the components of your LEHMANN Sargo Cordless Window Cleaner.

Included components of the LEHMANN Sargo Cordless Window Cleaner

Figure 1: Included Components
1. Window Vacuum Unit, 2. Microfiber Cleaning Pad with Holder, 3. Telescopic Pole, 4. Charger.

Dimensions of the LEHMANN Sargo Cordless Window Cleaner

Figure 2: Product Dimensions
The main unit measures approximately 31 cm in height, 25 cm in width (squeegee blade), and 15 cm in depth.

The LEHMANN Sargo is designed for efficient cleaning of windows, mirrors, and other smooth surfaces. It features an integrated sprayer, a 25 cm wide squeegee blade, and a dirty water collection tank.

Setup

1. Charging the Battery

Before first use, fully charge the device. A full charge takes approximately 150 minutes.

  • Connect the charger to the charging port on the device.
  • Plug the charger into a power outlet.
  • The charging indicator light will show the charging status (refer to device specific indicator details if available, otherwise assume a standard indicator).
  • Once fully charged, disconnect the charger.

2. Assembling the Telescopic Pole (Optional)

For cleaning high windows or hard-to-reach areas, attach the telescopic pole.

  • Attach the window vacuum unit to the end of the telescopic pole. Ensure it clicks securely into place.
  • Adjust the pole length by twisting and extending the sections. The pole is adjustable from 42.5 cm to 62 cm.
  • To attach the microfiber cleaning pad holder, slide it onto the designated slot on the pole.
LEHMANN Sargo Cordless Window Cleaner with telescopic pole attached

Figure 3: Window Cleaner with Telescopic Pole
The window cleaner unit attached to the telescopic pole for extended reach.

3. Attaching the Microfiber Cleaning Pad

The microfiber pad is used for applying cleaning solution and scrubbing surfaces.

  • Align the microfiber cleaning pad with its holder.
  • Securely attach the pad to the holder, ensuring it covers the entire surface.
Attaching the microfiber cleaning pad to its holder

Figure 4: Attaching Microfiber Pad
Hands demonstrating how to attach the microfiber cleaning pad to its designated holder.

4. Filling the Sprayer

The integrated sprayer has a capacity of 70 ml.

  • Locate the filling opening on the device.
  • Carefully pour your preferred window cleaning solution into the sprayer tank. Do not overfill.
  • Close the filling opening securely.
Filling the sprayer tank of the LEHMANN Sargo Cordless Window Cleaner

Figure 5: Easy Filling and Emptying
Water being poured into the device, illustrating the simple filling process.

Operating Instructions

Follow these steps for effective window cleaning.

Four-step process for cleaning windows with the LEHMANN Sargo Cordless Window Cleaner

Figure 6: Cleaning Process Overview
A visual guide showing the four steps: Pour water, Spray, Spread, Wipe.

1. Prepare the Surface

  • Ensure the surface is free from large debris.
  • If using the integrated sprayer, press the spray button to apply cleaning solution evenly onto the surface.
  • Use the microfiber pad (either handheld or on the telescopic pole) to spread the cleaning solution and loosen dirt.

2. Vacuum Cleaning

  • Turn on the window vacuum unit.
  • Place the squeegee blade firmly against the top of the wet surface.
  • Pull the device downwards in a straight, even motion, allowing the squeegee to collect the dirty water into the tank.
  • Overlap each stroke slightly to avoid leaving streaks.
  • For best results, wipe the squeegee blade with a clean cloth after each stroke.
Person using the LEHMANN Sargo Cordless Window Cleaner on a window

Figure 7: Efficient Cleaning
The window cleaner in action, demonstrating its ability to clean up to 75 m² per charge.

3. Emptying the Dirty Water Tank

  • After cleaning or when the dirty water tank is full (capacity 100 ml), turn off the device.
  • Locate the dirty water tank release mechanism.
  • Carefully remove the tank and empty its contents into a drain.
  • Rinse the tank with clean water and reattach it securely to the device.
Emptying the dirty water tank of the LEHMANN Sargo Cordless Window Cleaner

Figure 8: Easy Filling and Emptying
The device being filled with water, also illustrating the ease of emptying the dirty water tank.

Maintenance

1. Cleaning the Device

  • Wipe the exterior of the device with a soft, damp cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure the squeegee blade is clean and free from debris for optimal performance.

2. Microfiber Pad Care

  • Remove the microfiber pad from its holder after each use.
  • Wash the pad according to its care label (typically machine washable).
  • Allow the pad to air dry completely before storing or reusing.

3. Battery Care and Storage

  • Store the device in a cool, dry place when not in use.
  • For long-term storage, charge the battery to approximately 50% every few months to maintain battery health.
  • Do not expose the device to extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is discharged.Charge the battery fully.
Poor suction or streaks.Squeegee blade is dirty or worn. Dirty water tank is full.Clean the squeegee blade. Empty the dirty water tank. Replace the squeegee blade if worn.
Water leaks from the device.Dirty water tank not properly secured. Tank is overfilled.Ensure the dirty water tank is correctly attached. Do not overfill the tank.
Sprayer not working.Sprayer tank is empty. Nozzle is clogged.Refill the sprayer tank. Clean the sprayer nozzle.

Technical Specifications

FeatureDetail
ModelSargo
BrandLEHMANN
Battery TypeLithium-ion
Battery Capacity2200 mAh, 3.7 V
Operating TimeUp to 25 minutes
Charging TimeApprox. 150 minutes
Cleaning Width25 cm
Sprayer Tank Capacity70 ml
Dirty Water Tank Capacity100 ml
Max. Cleaning Area per Charge75 m²
Weight1 kg (approx. 0.7 kg for main unit)
Dimensions (L x W x H)10 x 14.5 x 44 cm
Telescopic Pole Length42.5 cm to 62 cm (adjustable)
Included ComponentsWindow vacuum, charger, telescopic pole, microfiber cleaning pad.
LEHMANN Sargo Cordless Window Cleaner with key specifications listed

Figure 9: Key Product Specifications
An image of the window cleaner highlighting its maximum width (25 cm), maximum working time (25 min), sprayer volume (70 ml), charging time (150 min), and dirty water tank volume (100 ml).

Warranty and Support

LEHMANN products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official LEHMANN website.

If you encounter any issues or have questions about your LEHMANN Sargo Cordless Window Cleaner, please contact LEHMANN customer support. Contact details can typically be found on the product packaging or the official brand website.

For more information, you can visit the LEHMANN Brand Store.

© 2024 LEHMANN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.