Stihl AP 500 S

Download PDF
Contents

STIHL AP 500 S Battery 36 V 8.8 Ah User Manual

Model: AP 500 S | Brand: Stihl

1. Introduction

This manual provides essential information for the safe and efficient use of your STIHL AP 500 S Battery. The AP 500 S is a powerful and durable 36 V, 8.8 Ah lithium-ion battery designed for use with compatible STIHL AP system battery devices. It features 337 Wh battery energy and an increased number of charge cycles due to power laminate technology. Please read this manual thoroughly before initial operation and keep it for future reference.

STIHL AP 500 S Battery

Image 1.1: The STIHL AP 500 S Battery. This image shows the orange and black battery pack with the STIHL logo and "AP 500 S" model designation clearly visible. Four LED lights indicate the charge status, and a power button is present.

2. Safety Instructions

Always observe the following safety precautions when handling, charging, or storing the battery:

  • Read all instructions: Familiarize yourself with the battery and its compatible devices before use.
  • Use only approved chargers: Charge the battery only with STIHL AL 101, AL 300, or AL 500 chargers. Using unapproved chargers can cause fire, injury, or damage.
  • Avoid short circuits: Do not allow metal objects to contact the battery terminals.
  • Protect from extreme conditions: Do not expose the battery to water, rain, or extreme temperatures (above 50°C / 122°F or below -10°C / 14°F).
  • Do not disassemble: Never attempt to open, modify, or repair the battery. Refer servicing to authorized STIHL service personnel.
  • Proper storage: Store the battery in a cool, dry place, away from direct sunlight and out of reach of children.
  • Disposal: Dispose of batteries responsibly according to local regulations. Do not dispose of in household waste or by fire.
  • Check for damage: Do not use a damaged or modified battery.

3. Setup and Charging

Before first use, ensure the battery is fully charged.

  1. Select a Charger: Use a compatible STIHL charger (AL 101, AL 300, or AL 500).
  2. Connect Charger: Plug the charger into a suitable power outlet.
  3. Insert Battery: Slide the AP 500 S battery into the charger until it clicks into place.
  4. Monitor Charging: The charger's indicator lights will show the charging status. The battery's four LED lights will also indicate its charge level during charging.
  5. Remove Battery: Once fully charged, remove the battery from the charger.

Note: The AP 500 S battery features power laminate technology, which contributes to an increased number of charge cycles compared to previous STIHL batteries.

4. Operating the Battery

The STIHL AP 500 S battery is designed for seamless integration with all STIHL AP system battery devices.

  • Inserting into Tool: Align the battery with the battery compartment of your STIHL AP system tool and push it in firmly until it locks.
  • Checking Charge Status: Press the button on the battery to illuminate the four LED lights, indicating the current charge level. Each illuminated LED represents approximately 25% of the charge.
  • Removing from Tool: Press the release button(s) on the tool and pull the battery out.

The AP 500 S offers a high energy content of 337 Wh, providing extended runtimes for demanding tasks.

5. Maintenance and Storage

Proper care ensures the longevity and performance of your STIHL AP 500 S battery.

  • Cleaning: Keep the battery clean and dry. Use a soft, damp cloth to wipe off dirt. Do not use solvents or abrasive cleaners.
  • Terminal Care: Ensure battery terminals are free from dirt and corrosion.
  • Storage:
    • Store the battery in a cool, dry place, ideally between 10°C and 20°C (50°F and 68°F).
    • Avoid direct sunlight and extreme temperatures.
    • For long-term storage, charge the battery to approximately 60-80% capacity.
    • Do not store the battery in a discharged state for extended periods.
  • Inspection: Regularly inspect the battery for any signs of damage, such as cracks, swelling, or leaks. Discontinue use if damage is observed.

6. Troubleshooting

If you encounter issues with your AP 500 S battery, consider the following:

  • Battery not charging:
    • Ensure the charger is properly plugged into a working outlet.
    • Verify the battery is correctly inserted into the charger.
    • Check for any visible damage to the battery or charger.
    • Ensure the ambient temperature is within the recommended charging range.
  • Tool not operating:
    • Check if the battery is fully charged.
    • Ensure the battery is securely inserted into the tool.
    • Verify the tool itself is functioning correctly (refer to the tool's manual).
  • Reduced run time:
    • Battery capacity can decrease over time with repeated charge cycles.
    • Operating in very cold conditions can temporarily reduce performance.
    • Ensure the battery is stored correctly when not in use.

If problems persist, contact an authorized STIHL service dealer.

7. Specifications

BrandStihl
ModelAP 500 S
Rated Voltage36 V
Battery Capacity (IEC 61960)8.8 Ah
Energy Content337 Wh
Battery Cell CompositionLithium Ion
Weight2.0 kg (4.41 lbs)
Compatible ChargersSTIHL AL 101, AL 300, AL 500
Part NumberEA014006500

Note: Specifications are subject to change without notice.

8. Warranty and Support

For information regarding warranty coverage, service, or technical support, please refer to the official STIHL website or contact your authorized STIHL dealer. Keep your purchase receipt as proof of purchase.

Online Resources: Visit the official STIHL website for product information, FAQs, and dealer locator.

© 2026 Stihl. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.