1. Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of the Elmo RC-VHLA Remote Control. This remote control is specifically designed for seamless integration and control of Elmo P10S and P30 Visual Presenters, enabling users to manage presentations and adjust visual settings efficiently.
2. Product Overview
The Elmo RC-VHLA remote control features a comprehensive layout of buttons for various functions, allowing precise control over your visual presenter. Familiarize yourself with the remote's design and button functions below.
Figure 1: Elmo RC-VHLA Remote Control. This image displays the full layout of the Elmo RC-VHLA remote control. The remote is dark gray with a blue control panel. The top section features eight numbered preset/call buttons (1-8) and a 'SLIDE SHOW' button. The central area includes navigation buttons (up, down, left, right) surrounding an 'ENTER' button, with a 'MENU' button above. To the right of the navigation cluster are buttons for 'EDGE EFFECT', 'TEXT', 'IMAGE ROTATION', and 'PAUSE'. Below the navigation, there are buttons for 'POSI/NEGA' (Positive/Negative), 'COLOR/B&W' (Color/Black & White), 'NORMAL', 'OPEN', and 'CLOSE'. The bottom section is dedicated to image adjustments, with horizontal bars labeled 'IRIS', 'FOCUS', and 'ZOOM'. Under 'IRIS' are 'NEAR', 'FAR', and 'AF' (Auto Focus). Under 'FOCUS' are 'TELE' (Telephoto) and 'WIDE'. Under 'ZOOM' are two unlabeled buttons and a 'LAMP' button. The overall design is ergonomic for comfortable handling.
Button Functions:
- PRESET / CALL (1-8): Used to save and recall specific camera settings or presentation layouts.
- SLIDE SHOW: Activates or controls the slide show function of the visual presenter.
- MENU: Accesses the visual presenter's on-screen menu for configuration and settings.
- Navigation Buttons (Up, Down, Left, Right): Navigates through menu options and adjusts settings.
- ENTER: Confirms selections within the menu or activates a chosen function.
- EDGE EFFECT: Applies or adjusts edge enhancement effects to the displayed image.
- TEXT: Optimizes the image display for text readability.
- IMAGE ROTATION: Rotates the displayed image clockwise or counter-clockwise.
- PAUSE: Freezes the current live image on the screen.
- POSI/NEGA (Positive/Negative): Toggles between positive and negative image display.
- COLOR/B&W (Color/Black & White): Switches the image display between color and black & white modes.
- IRIS (NORMAL, OPEN, CLOSE): Controls the aperture of the camera lens. 'NORMAL' for automatic adjustment, 'OPEN' for wider aperture (brighter image), 'CLOSE' for narrower aperture (darker image).
- FOCUS (NEAR, FAR, AF): Adjusts the image focus. 'NEAR' for closer objects, 'FAR' for distant objects, 'AF' for automatic focus adjustment.
- ZOOM (TELE, WIDE): Controls the optical zoom of the camera. 'TELE' for zooming in, 'WIDE' for zooming out.
- LAMP: Controls the built-in lamp of the visual presenter, typically for illumination.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch to open it.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, sliding it back into place until it clicks securely.
Note: Always use fresh batteries and dispose of old batteries responsibly. Remove batteries if the remote control will not be used for an extended period to prevent leakage.
3.2 Connecting to the Visual Presenter
The Elmo RC-VHLA remote control operates via infrared (IR) signals. Ensure a clear line of sight between the remote control's IR emitter (located at the front top edge) and the IR receiver on your Elmo P10S or P30 Visual Presenter. No pairing process is required.
4. Operating Instructions
4.1 Basic Operation
- Power On/Off: Use the power button on your visual presenter to turn it on or off. The remote primarily controls functions once the presenter is active.
- Accessing Menus: Press the MENU button to display the on-screen menu of the visual presenter. Use the navigation buttons (Up, Down, Left, Right) to browse options and ENTER to select.
- Adjusting Image: Utilize the IRIS, FOCUS, and ZOOM buttons to fine-tune the image clarity, brightness, and magnification.
4.2 Advanced Functions
- Using Presets: To save a specific camera setting, configure your visual presenter as desired, then press and hold one of the PRESET/CALL (1-8) buttons until a confirmation appears on screen. To recall a preset, simply press the corresponding PRESET/CALL button.
- Slide Show Mode: Press the SLIDE SHOW button to initiate a presentation from stored images or documents on the visual presenter. Use navigation buttons to move between slides.
- Image Effects: Experiment with EDGE EFFECT, TEXT, POSI/NEGA, and COLOR/B&W buttons to enhance or modify the visual output for different content types.
5. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace batteries when the remote's responsiveness decreases. Refer to Section 3.1 for battery installation instructions.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead or incorrectly inserted batteries. | Replace batteries, ensuring correct polarity. |
| Remote not responding. | No clear line of sight to visual presenter. | Ensure the remote's IR emitter is pointed directly at the visual presenter's IR receiver without obstructions. |
| Remote functions are intermittent. | Low battery power. | Replace batteries. |
| Specific button not working. | Button malfunction or debris. | Gently clean around the button. If the issue persists, contact customer support. |
7. Specifications
- Brand: Elmo
- Model: RC-VHLA (4K20668)
- Compatible Visual Presenters: Elmo P10S, Elmo P30
- Controller Type: Button Control
- Special Feature: Ergonomic design
- Item Weight: 4 ounces
- UPC: 761373836169
- Manufacturer: Elmo USA Corp
8. Warranty and Support
Specific warranty information for the Elmo RC-VHLA Remote Control is not provided in the product data. For warranty details, technical support, or service inquiries, please refer to the documentation included with your Elmo Visual Presenter or visit the official Elmo USA Corp website.
