Lotus LT-150 Currency Counting Machine

1. Introduction

Thank you for choosing the Lotus LT-150 Currency Counting Machine. This device is designed for efficient and accurate counting of banknotes, featuring advanced fake note detection capabilities using Ultraviolet (UV) and Magnetic (MG) sensors. It is specifically optimized for the Indian market and supports most global currencies. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your machine to ensure optimal performance and longevity.

2. Safety Instructions

• Read all instructions carefully before operating the machine.
• Ensure the power supply matches the specifications indicated on the machine's label.
• Do not expose the machine to water or excessive humidity.
• Place the machine on a stable, level surface to prevent vibrations and ensure accurate counting.
• Keep the machine away from direct sunlight, heat sources, and strong magnetic fields.
• Unplug the machine from the power outlet before cleaning or performing any maintenance.
• Do not attempt to open or repair the machine yourself. Contact qualified service personnel for assistance.
• Keep hands, hair, and loose clothing away from moving parts during operation.

3. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your vendor immediately.

• Lotus LT-150 Currency Counting Machine
• Power Cord
• User Manual (this document)
• Cleaning Brush (may be included)

4. Product Overview

The Lotus LT-150 is a robust currency counting machine equipped with a large front LCD display and intuitive buttons for ease of use. It features advanced detection methods to identify counterfeit notes.

Figure 4.1: Front view of the Lotus LT-150 Currency Counting Machine, showing the hopper, stacker, control panel, and LCD display.

4.1. Main Components

• Hopper: Where banknotes are placed for counting.
• Stacker: Where counted banknotes are collected.
• Control Panel: Buttons for various functions and settings.
• LCD Display: Shows counting results, error messages, and operational modes.
• Sensors (UV/MG/IR): Detect counterfeit features and note characteristics.
• Power Inlet: Connection point for the power cord (located at the rear).
• On/Off Switch: Main power switch (located at the rear).

Figure 4.2: Rear view of the Lotus LT-150, highlighting the power inlet and main power switch.

5. Setup

5.1. Unpacking

1. Carefully remove the machine from its packaging.
2. Remove any protective films or packing materials.
3. Verify all package contents are present as listed in Section 3.

5.2. Placement

Place the machine on a flat, stable, and dry surface. Ensure there is adequate space around the machine for proper ventilation and operation, especially for placing and retrieving banknotes.

5.3. Power Connection

1. Ensure the machine's main power switch (located at the rear) is in the "OFF" position.
2. Connect the provided power cord to the power inlet on the rear of the machine.
3. Plug the other end of the power cord into a suitable electrical outlet.

6. Operating Instructions

6.1. Powering On/Off

• To power on, flip the main power switch (at the rear) to the "ON" position. The machine will perform a self-test.
• To power off, flip the main power switch to the "OFF" position.

6.2. Basic Counting

1. Ensure the machine is powered on and in its default counting mode.
2. Straighten the banknotes and remove any foreign objects like paper clips or rubber bands.
3. Place the stack of banknotes neatly into the hopper. The machine will automatically start counting.
4. The count will be displayed on the LCD. Once counting is complete, the machine will stop automatically.
5. To clear the count, press the CLEAR button (if available, or it may clear automatically upon removing notes).

6.3. Fake Note Detection (UV & MG)

The LT-150 automatically detects counterfeit notes using Ultraviolet (UV) and Magnetic (MG) sensors during the counting process.

• If a suspicious note is detected, the machine will stop, and an error code or message will appear on the display.
• Remove the suspicious note from the stacker or the path as indicated by the machine.
• Press START to resume counting the remaining notes.
• It is recommended to manually inspect any notes flagged as suspicious.

6.4. Batching Function

The batching function allows the machine to stop counting once a preset number of notes has been reached.

1. Press the BATCH button.
2. Use the + and - buttons to set the desired batch quantity (e.g., 100, 50, 20).
3. Place notes in the hopper. The machine will count and stop when the batch quantity is reached.
4. Remove the batch and place more notes to continue counting subsequent batches.
5. To exit batch mode, press the BATCH button again.

6.5. Adding Function

The adding function accumulates the total count of multiple batches or counting sessions.

1. Press the ADD button. The ADD indicator on the display should light up.
2. Place the first stack of notes in the hopper. The machine will count them.
3. Place subsequent stacks of notes. The machine will add each count to the previous total.
4. The total accumulated count will be displayed.
5. To exit add mode, press the ADD button again.

6.6. Self-Examination Function

The machine performs a self-examination upon startup to ensure all systems are functioning correctly. If an error occurs during this process, an error code will be displayed. Refer to the Troubleshooting section for guidance.

7. Maintenance

Regular cleaning and proper maintenance will extend the lifespan and ensure the accuracy of your currency counting machine.

7.1. Cleaning Procedures

1. Power Off and Unplug: Always turn off the machine and unplug it from the power outlet before cleaning.
2. Dust Removal: Use a soft, dry cloth or the provided cleaning brush to gently remove dust and debris from the hopper, stacker, and sensor areas.
3. Sensor Cleaning: Carefully clean the UV, MG, and IR sensors with a soft, lint-free cloth, possibly lightly dampened with isopropyl alcohol if stubborn residue is present. Ensure sensors are dry before powering on.
4. Exterior Cleaning: Wipe the exterior of the machine with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents.

7.2. Storage

When not in use for extended periods, store the machine in a cool, dry, and dust-free environment. It is advisable to cover the machine to prevent dust accumulation.

8. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, please contact customer support.

9. Specifications

10. Warranty and Support

10.1. Product Warranty

The Lotus LT-150 Currency Counting Machine comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or improper maintenance. Please retain your purchase receipt as proof of warranty.

10.2. Customer Support

If you encounter any issues that cannot be resolved using the Troubleshooting section, or if you require further assistance, please contact your retailer or the manufacturer's customer service.

When contacting support, please be prepared to provide:

• Your product model: Lotus LT-150
• Date of purchase
• A detailed description of the issue