AROMA Studio 32 Bluetooth Speaker User Manual

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your AROMA Studio 32 Bluetooth Speaker. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity. Keep this manual for future reference.

2. Package Contents

Verify that all items listed below are present in your package:

• 1 x AROMA Studio 32 Bluetooth Speaker
• 1 x Charging Cable
• 1 x User Manual (this document)

3. Product Overview

Familiarize yourself with the components and controls of your AROMA Studio 32 speaker.

3.1 Speaker Layout

Figure 1: Front view of the AROMA Studio 32 Bluetooth Speaker, showcasing its sleek design and dual speaker grilles with RGB lighting.

3.2 Control Panel and Ports

Figure 2: Side view illustrating the control buttons (Mode, Play/Pause, Volume Up/Next, Volume Down/Previous) and connectivity ports (AUX, USB, TF Card slot, Charging port).

Figure 3: Close-up of the integrated music and call controls, along with the various connectivity options available on the speaker.

• Power Button: Press and hold to turn the speaker On/Off.
• Mode Button (M): Press to switch between Bluetooth, FM Radio, AUX, USB, and TF Card modes.
• Play/Pause Button: Press to play or pause audio. During a call, press to answer/end a call. Press and hold to reject a call.
• Volume Down / Previous Track Button (-): Press to decrease volume. Press and hold to go to the previous track.
• Volume Up / Next Track Button (+): Press to increase volume. Press and hold to go to the next track.
• AUX Port: For wired audio connection.
• USB Port: For USB drive playback.
• TF Card Slot: For TF (MicroSD) card playback.
• Charging Port: For charging the speaker.

4. Charging the Speaker

Before first use, fully charge the speaker. Use the provided charging cable.

1. Connect one end of the charging cable to the charging port on the speaker.
2. Connect the other end to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate during charging and turn off once fully charged.
4. A full charge typically takes approximately 3-4 hours. The speaker offers up to 8 hours of playback on a full charge.

5. Setup and Bluetooth Pairing

Follow these steps to connect your speaker via Bluetooth:

1. Power On: Press and hold the Power button to turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
2. Activate Bluetooth: Enable Bluetooth on your mobile device, laptop, or other compatible device.
3. Search for Devices: On your device, search for available Bluetooth devices.
4. Select Speaker: From the list, select "AROMA Studio 32".
5. Pairing Confirmation: Once successfully paired, the speaker will emit an audible confirmation, and the LED light will stop flashing and remain solid.

The speaker will automatically attempt to reconnect to the last paired device when powered on, if that device's Bluetooth is active and within range.

6. Operating Instructions

6.1 Basic Audio Playback

• Play/Pause: Press the Play/Pause button to start or pause music playback.
• Volume Control: Press the '+' button to increase volume, and the '-' button to decrease volume.
• Next/Previous Track: Press and hold the '+' button for the next track. Press and hold the '-' button for the previous track.

6.2 Multi-Connectivity Modes

The AROMA Studio 32 supports multiple audio input sources. Press the Mode (M) button to cycle through the following modes:

• Bluetooth Mode: For wireless audio streaming from paired devices.
• FM Radio Mode: The speaker can tune into FM radio stations. For best reception, ensure the charging cable is connected as an antenna.
• AUX Mode: Connect an external audio device using a 3.5mm audio cable (not included) to the AUX port.
• USB Drive Mode: Insert a USB flash drive into the USB port to play audio files directly.
• TF Card Mode: Insert a TF (MicroSD) card into the TF card slot to play audio files directly.

6.3 Hands-Free Calling

When connected via Bluetooth to a smartphone, the speaker's built-in microphone allows for hands-free calling.

• Answer Call: Press the Play/Pause button once when an incoming call rings.
• End Call: Press the Play/Pause button once during a call to hang up.
• Reject Call: Press and hold the Play/Pause button for 2 seconds to reject an incoming call.

6.4 RGB Lighting Effects

The speaker features dynamic RGB lighting. The lighting effects can synchronize with the music rhythm or display in a breathing mode. Refer to the control panel for specific lighting control options, usually integrated with the Mode button or a dedicated light button if available.

Figure 4: Illustration of the dynamic RGB lighting feature, showing rhythm and breathing modes.

7. Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
• Water Resistance: The speaker is IPX4 splashproof, meaning it can withstand splashes of water. Do not submerge the speaker in water or expose it to heavy rain. Ensure all port covers are securely closed if present.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.

8. Troubleshooting

If you encounter issues with your speaker, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact AROMA customer support.

• Manufacturer Contact: care@aroma-accessories.com, repair@aroma-accessories.com
• Brand Store: Visit the official AROMA store on Amazon for more products and information: AROMA Store

Please retain your proof of purchase for any warranty claims.