Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Brightever Motion Sensor LED Ceiling Light. This 7.5-inch flush mount lighting fixture features an upgraded PIR motion sensor, selectable color temperatures (3000K/4000K/5000K), and energy-efficient LED technology. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
- WARNING: Always turn off the power at the circuit breaker or fuse box before beginning any installation, maintenance, or cleaning procedures. Failure to do so may result in electric shock, serious injury, or death.
- Consult a qualified electrician if you are unsure about the wiring process.
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Ensure all electrical connections are secure and comply with local electrical codes.
- This product is not intended for use with dimmers.
Image: A hand turning off a circuit breaker, emphasizing the importance of disconnecting power before installation.
Package Contents
Verify that all components are present and undamaged before installation.
- Brightever Motion Sensor LED Ceiling Light (4 units)
- Mounting Bracket
- Screws and Wall Anchors
- Wire Nuts
- User Manual
Product Features
- Upgraded PIR Motion Sensor: Automatically turns on when motion is detected within 9.8-19.6 feet (3-6 meters) and turns off approximately 60 seconds after motion ceases. Operates both day and night.
- Three Color Temperatures in One: Offers 3000K (Warm White), 4000K (Daylight White), and 5000K (Cool White) options, selectable via a DIP switch before installation.
- Energy Saving & Long Lifespan: Consumes only 15W while providing brightness equivalent to a 100W incandescent bulb. Designed for over 25,000 hours of operation.
- Reliable Lighting: Provides stable illumination without flicker or buzzing.
- Cost-effective Performance: Eliminates the need for frequent bulb or battery changes, enhancing safety and convenience.
Image: Visual representation of the three selectable color temperatures (3000K, 4000K, 5000K) in different environments.
Specifications
| Brand | Brightever |
| Model Number | HM17-PR8-15W120-3CCT-G |
| Dimensions (L x W x H) | 7.5" x 7.5" x 0.87" |
| Wattage | 15 Watts |
| Brightness | 1200 Lumens |
| Color Temperature | 3000K / 4000K / 5000K (Selectable) |
| Motion Sensor Range | 9.8 - 19.6 feet (3 - 6 meters) |
| Motion Sensor Duration | Approx. 60 seconds (after last detected motion) |
| Lifespan | 25,000+ hours |
| Material | Metal, Plastic |
| Installation Type | Flush Mount |
| Usage | Indoor |
| Power Source | Corded Electric |
Installation Guide
Follow these steps carefully to install your Brightever Motion Sensor LED Ceiling Light.
- Turn off Power: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker.
- Fix Mounting Bracket: Secure the mounting bracket to the ceiling junction box using the provided screws. The mounting bracket is typically packed at the back of the light fixture; remove it before installation.
- Adjust DIP Switches: Before connecting wires and mounting the light, slide the DIP switch on the back of the fixture to select your preferred color temperature (3000K, 4000K, or 5000K). This setting cannot be easily changed after installation.
- Connect Wires: Connect the electrical wires from the ceiling to the light fixture's wires using the provided wire nuts. Typically, connect the black wire to black, white to white, and ground to ground. Ensure connections are secure.
- Install the Light to the Base: Carefully tuck the connected wires into the junction box. Align the light fixture with the mounting bracket and secure it in place.
Image: A hand switching off a circuit breaker to cut power.
Image: A person installing the circular mounting bracket onto a ceiling junction box.
Image: A close-up view of the DIP switch on the light's back for selecting color temperature.
Image: Hands connecting the light fixture's wires to the house wiring using wire nuts.
Image: A hand securing the light fixture onto the previously installed mounting bracket.
Installation Video Guide
Video: An official installation guide for the Brightever Motion Sensor LED Ceiling Light, demonstrating each step from power disconnection to final mounting.
Operating Instructions
- Motion Sensor Operation: Once installed and power is restored, the light will automatically activate when motion is detected within its sensing range. It will remain on as long as motion is present and will turn off approximately 60 seconds after the last detected movement.
- Color Temperature: The color temperature (3000K, 4000K, or 5000K) is set using the DIP switch during installation. It cannot be changed during normal operation without dismounting the fixture.
Image: A close-up of the integrated motion sensor on the light fixture.
Maintenance
To ensure optimal performance and longevity of your LED ceiling light, follow these simple maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electrical components.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, turn off the power and consult a qualified electrician.
Troubleshooting
If you encounter any issues with your Brightever Motion Sensor LED Ceiling Light, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; incorrect DIP switch setting. | Check circuit breaker. Ensure wires are securely connected. Verify DIP switch is set correctly. |
| Light stays on continuously. | Constant motion within sensor range; sensor obstruction. | Ensure no continuous motion in the area. Check if anything is blocking or interfering with the motion sensor. |
| Motion sensor not detecting motion. | Incorrect installation height; sensor obstruction; faulty sensor. | Verify installation height (recommended 8-10ft). Clear any obstructions. If problem persists, contact support. |
| Light is too dim or too bright. | Brightness is fixed. | The light provides a fixed brightness of 1200 Lumens. This cannot be adjusted. |
Warranty and Support
Your Brightever Motion Sensor LED Ceiling Light is covered by a 12-month manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For technical assistance, warranty claims, or any other inquiries, please contact Brightever US customer support. Please have your model number (HM17-PR8-15W120-3CCT-G) and proof of purchase available when contacting support.