1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Philips Moire LED CL200 Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The Philips Moire LED CL200 is a modern, energy-efficient LED ceiling light designed to provide comfortable, warm white illumination for your home. Its simple, round design integrates seamlessly into various interior styles.
2. Safety Information
WARNING: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
- Ensure the power supply is switched off before commencing any work.
- This product is designed for indoor use only.
- Do not attempt to modify the light fixture.
- Keep packaging materials out of reach of children.
- The integrated LED light source is not replaceable. If the light source reaches its end of life, the entire luminaire must be replaced.
- This product is a containing product, meaning it can be disassembled for separate checking of the light source(s) it contains, but the light source itself is not user-replaceable.
3. Product Overview
The Philips Moire LED CL200 Ceiling Light features a minimalist round design with integrated LED technology, providing a warm white light output of 450 lumens at 6 watts. It is constructed from aluminium and designed for ceiling mount installation.
Figure 3.1: Philips Moire LED CL200 Ceiling Light packaging, showing the product and key features like EyeComfort and 6W warm white light.
Figure 3.2: Top-down view of the Philips Moire LED CL200 Ceiling Light, highlighting its round, compact form factor.
Figure 3.3: Side profile of the Philips Moire LED CL200 Ceiling Light, illustrating its low-profile design suitable for close-to-ceiling installation.
4. Setup and Installation
Before beginning installation, ensure you have the necessary tools: screwdriver, wire strippers, and a drill (if required for mounting). Always consult a qualified electrician if you are unsure about any part of the installation process.
4.1 Pre-Installation Steps
- Disconnect Power: Locate the main circuit breaker for the room where the light will be installed and switch off the power. Verify power is off using a voltage tester.
- Unpack Contents: Carefully remove the ceiling light and all components from the packaging. Inspect for any damage.
4.2 Mounting the Fixture
- Prepare Mounting Surface: Ensure the ceiling surface is clean, dry, and capable of supporting the light fixture's weight (340g).
- Attach Mounting Bracket: Secure the light's mounting bracket to the ceiling junction box using appropriate screws.
- Wire Connections: Connect the household electrical wires to the light fixture's wires according to local electrical codes. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. The light uses screw terminals for connections.
- Secure Fixture: Carefully align the light fixture with the mounting bracket and secure it in place.
Figure 4.1: Dimensional drawing of the Philips Moire LED CL200 Ceiling Light, showing a diameter of 220mm and a height of 50mm.
5. Operating Instructions
Once installed, the Philips Moire LED CL200 Ceiling Light operates via a standard wall switch (push button style). There are no additional controls on the fixture itself.
- Restore Power: After installation is complete and all connections are secure, switch the power back on at the main circuit breaker.
- Turn On/Off: Use the wall switch to turn the light on or off.
Figure 5.1: The Philips Moire LED CL200 Ceiling Light installed and emitting its warm white light, demonstrating its illumination pattern.
6. Maintenance
The Philips Moire LED CL200 Ceiling Light requires minimal maintenance due to its durable LED technology.
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- LED Lifespan: The integrated LED is designed for a long operational life. No bulb replacement is necessary.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Verify wire connections are secure. Test wall switch. Consult a qualified electrician. |
| Light flickers. | Unstable power supply; loose wiring. | Ensure stable power. Check wiring connections. If problem persists, consult a qualified electrician. |
| Light is dim. | Not applicable for this product as LED output is fixed. | Ensure the product is suitable for your lighting needs. |
If troubleshooting steps do not resolve the issue, contact Philips customer support or a qualified electrician.
8. Specifications
| Brand | Philips Lighting |
| Model Number | 915005777661 (CL200) |
| Manufacturer | Signify |
| Dimensions | 25.3 x 25.1 x 6.8 cm (Package); Ø220 mm x 50 mm (Fixture) |
| Item Weight | 340 g |
| Colour | White |
| Material | Aluminium |
| Light Source Type | Integrated LED |
| Wattage | 6 watts |
| Luminous Flux | 450 lumen |
| Voltage | 230 Volts (AC) |
| Shade Colour | Warm white |
| Installation Type | Ceiling Mount |
| Special Features | Energy Efficient, EyeComfort |
| Country of Origin | China |
9. Warranty and Support
For warranty information and customer support, please refer to the official Philips Lighting website or contact your local Philips representative. Keep your proof of purchase for warranty claims.
Recycling Information: This product contains electronic components and should be disposed of responsibly at designated collection points for electrical and electronic equipment. Do not dispose of with household waste.
For more information on light bulb recycling and clean-up procedures for broken or damaged lamps, please visit relevant local authority guidelines or Philips support resources.
