Hama Battery Charger for AA and AAA Batteries

Introduction

This manual provides important information for the safe and efficient use of your Hama Battery Charger, Model 00223553. Please read these instructions carefully before first use and keep them for future reference.

Safety Instructions

• Use the charger only for rechargeable NiMH AA and AAA batteries. Do not attempt to charge non-rechargeable batteries or other battery types.
• Do not expose the charger to moisture, rain, or extreme temperatures.
• Do not open or modify the charger. Repairs should only be performed by qualified personnel.
• Ensure proper polarity when inserting batteries. Incorrect insertion can damage the charger and batteries.
• Unplug the charger from the power outlet when not in use or before cleaning.
• Keep this device out of reach of children.

Package Contents

Please check that all items are present and in good condition:

• 1x Hama Battery Charger (Model 00223553)
• 1x Instruction Manual

Image: The Hama Battery Charger, Model 00223553, shown with example AA and AAA batteries inserted into its four charging slots. The charger is black and compact.

Setup

1. Unpack the Charger: Carefully remove the battery charger from its packaging.
2. Prepare Batteries: Ensure the batteries you intend to charge are rechargeable NiMH AA or AAA types.
3. Insert Batteries: Insert 2 or 4 batteries into the charging slots. Pay close attention to the polarity markings (+ and -) inside the charger and on the batteries. Incorrect insertion can prevent charging or damage the batteries/charger.
4. Connect to Power: Plug the charger directly into a standard wall power outlet (Schuko plug Type F).

Operation

The Hama Battery Charger is designed for straightforward operation:

1. Initiating Charge: Once the charger is plugged into a power outlet with batteries correctly inserted, the charging process begins automatically.
2. LED Indicators: The charger features 2 LED control indicators. These LEDs illuminate to show that the charging process is active.
3. Automatic Shut-off: The charger has a built-in timer that automatically stops the charging process after a preset time. This feature protects the batteries from overcharging and helps prolong their lifespan.
4. Removing Batteries: After the charging process is complete (indicated by the timer shut-off), unplug the charger from the wall outlet and then remove the charged batteries.

Note: The charger supports simultaneous charging of 2 or 4 AA or AAA batteries. It does not support charging of a single battery or an odd number of batteries (e.g., 1 or 3).

Maintenance

• Cleaning: Disconnect the charger from the power supply before cleaning. Use a dry, soft cloth to clean the exterior of the charger. Do not use abrasive cleaners or solvents.
• Storage: Store the charger in a cool, dry place away from direct sunlight and moisture when not in use.
• Inspection: Periodically inspect the charger and its power plug for any signs of damage. Do not use a damaged charger.

Troubleshooting

Specifications