Introduction
Thank you for choosing the UrbanX 2.4GHz & Bluetooth Mouse. This wireless mouse offers dual connectivity options (2.4GHz and Bluetooth 5.0), a rechargeable battery, and a comfortable, silent-click design with colorful LED lighting. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.
Image: The UrbanX mouse features vibrant LED lighting, enhancing your workspace.
Image: The ergonomic design of the UrbanX mouse provides maximum comfort for extended use.
Setup Guide
1. Charging the Mouse
Before first use, fully charge the mouse. The built-in 450mAh lithium rechargeable battery can last up to 500 hours on a full charge. Use the included USB cable to charge the mouse.
- Connect the micro USB end of the charging cable to the mouse's charging port.
- Connect the USB-A end to a power source (e.g., computer USB port, USB wall adapter).
- The LED indicator on the mouse will show charging status (e.g., red light for charging, light off when fully charged).
- A full charge typically takes approximately 2 hours and provides 8-10 days of usage.
Image: Charging the UrbanX mouse via the included USB cable.
2. Connecting the Mouse
The UrbanX mouse supports two connection modes: 2.4GHz wireless via USB adapter and Bluetooth 5.0.
2.1. 2.4GHz Wireless Connection
- Locate the USB receiver, usually stored in a compartment on the underside of the mouse.
- Insert the USB receiver into an available USB port on your computer, laptop, or compatible device.
- Turn on the mouse using the power switch on the bottom.
- The mouse should automatically connect. If not, try moving the mouse or restarting your device.
2.2. Bluetooth 5.0 Connection
This mode is compatible with most Bluetooth-enabled devices, including PCs, MacBooks, iPads (PadOS 13 and iOS 13 or above with Assistive Touch enabled), Android tablets, and smartphones.
- Turn on the mouse using the power switch on the bottom.
- Switch the mode selector on the bottom of the mouse to the Bluetooth icon.
- On your device, go to Bluetooth settings.
- Search for new devices. The mouse should appear as "UrbanX Mouse" or similar.
- Select the mouse to pair.
- Once paired, the mouse is ready for use.
Image: Key features of the UrbanX mouse, including dual connectivity and power management.
Image: The UrbanX mouse is widely compatible with various devices including desktops, laptops, and tablets.
Operation
Basic Functions
- Left Click: Primary selection and activation.
- Right Click: Accesses contextual menus.
- Scroll Wheel: Scrolls content vertically. The sturdy anti-slip rubber scroll wheel ensures precise control.
- DPI Button: Located near the scroll wheel, this button allows you to cycle through 3 adjustable DPI levels to change cursor sensitivity.
LED Lighting
The mouse features colorful LED lights that enhance its aesthetic. These lights are typically active during use and may indicate charging status or connection mode.
Automatic Sleep Mode
To conserve battery life, the UrbanX mouse is equipped with an automatic sleep and wake mode. If the mouse is inactive for a period, it will enter sleep mode. To wake it up, simply move the mouse or click any button.
Maintenance
Charging
Recharge the mouse when the battery is low. The LED indicator may change or flash to signal a low battery. Use the provided USB cable for charging. Avoid using damaged cables or non-standard chargers.
Cleaning
To maintain the mouse's appearance and functionality, clean it regularly:
- Use a soft, dry cloth to wipe the surface of the mouse.
- For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
- Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the mouse.
- Ensure the mouse is powered off before cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low battery; Mouse powered off; Connection issue (2.4GHz receiver unplugged or Bluetooth not paired). | Charge the mouse; Turn on the mouse; For 2.4GHz, ensure receiver is plugged in; For Bluetooth, re-pair the mouse in device settings. |
| Lagging or intermittent connection | Interference; Distance from receiver/device; Low battery. | Move closer to the device (effective range up to 10 meters); Ensure no large metal objects are between mouse and receiver; Charge the mouse. |
| Cursor movement too fast/slow | DPI setting is not optimal. | Press the DPI button to cycle through the 3 adjustable DPI levels until desired sensitivity is reached. |
| LED lights not working | Mouse is off or in sleep mode; Battery is critically low. | Turn on/wake up the mouse; Charge the mouse. |
Specifications
Image: Dimensions of the UrbanX mouse.
| Feature | Detail |
|---|---|
| Brand | UrbanX |
| Model Number | UXM030 |
| Connectivity Technology | Bluetooth 5.0, 2.4GHz Wireless |
| Movement Detection | Optical |
| Buttons | 4 (Left, Right, Scroll Wheel, DPI) |
| DPI Levels | 3 adjustable levels |
| Battery | Built-in 450mAh Lithium Ion Rechargeable |
| Charging Time | Approx. 2 hours |
| Usage Time | Up to 500 hours (standby), 8-10 days (typical use) |
| Wireless Range | Up to 10 meters (30 feet) |
| Hand Orientation | Ambidextrous |
| Compatible Devices | Laptop, Personal Computer, Smartphone, Tablet, Television |
| Operating Systems | Windows 7/8/10, Linux, Mac OS, Android, PadOS 13+, iOS 13+ |
| Item Weight | 2.82 Ounces |
| Dimensions (L x W) | 4.4"L x 2.3"W |
| Material | Rubber (Enclosure) |
Warranty & Support
Warranty Information
The UrbanX 2.4GHz & Bluetooth Mouse comes with a 90-day quality warranty. This warranty covers manufacturing defects and ensures your satisfaction with the product. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty claims, please contact UrbanX customer support. You can typically find contact information on the UrbanX official website or through your purchase platform.
For more information, visit the UrbanX Store on Amazon.
