SUPERJARE Console Table with Outlet

Introduction

Thank you for choosing the SUPERJARE Console Table with Outlet. This manual provides essential information for the safe assembly, operation, and maintenance of your new console table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The SUPERJARE Console Table positioned behind a sofa, featuring a laptop and a phone charging via the integrated outlet.

Package Contents

Before assembly, ensure all components are present and undamaged. The package includes all necessary parts for assembly, along with an assembly guide and basic installation tools. A screwdriver is recommended for certain steps but is not included.

• Tabletop sections (Engineered Wood)
• Metal frame components
• Charging station unit (2 AC outlets, 1 USB port, 1 Type-C port)
• Adjustable feet
• Anti-tip device
• Assembly hardware (screws, bolts, etc.)
• Assembly Guide
• Basic Installation Tool (Allen wrench with Phillips head)

Assembly Instructions

Follow the step-by-step instructions provided in the included Assembly Guide. All parts are numbered for easy identification. Assembly typically takes approximately 30 minutes.

1. Unpack and Identify Parts: Carefully remove all components from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all numbered parts are present according to the parts list in the Assembly Guide.
2. Assemble the Metal Frame: Connect the metal frame components using the provided hardware. Ensure all connections are secure but do not overtighten until the entire frame is assembled.
3. Attach Tabletop Sections: Secure the engineered wood tabletop sections to the assembled metal frame. The tabletop comes in two pieces, which will align to form the full length.
4. Install Charging Station: The charging station can be installed in the middle or at one end of the table, depending on your preference. Carefully place the unit into the pre-cut slot and secure it with the provided screws. Ensure the power cord is routed safely.
5. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the table legs. These can be adjusted later to ensure stability on uneven surfaces.
6. Final Tightening: Once all components are in place and aligned, fully tighten all screws and bolts.

Image: A close-up view illustrating the two possible installation positions for the charging station: either on the side or centrally located on the table surface.

Operating Instructions

The SUPERJARE Console Table is designed for convenience and functionality.

• Charging Station: Plug the table's main power cord into a wall outlet. Use the two AC outlets, one USB port, and one Type-C port to power or charge your electronic devices.
• Adjustable Feet: To ensure the table is stable and level, rotate the adjustable feet at the bottom of each leg until the table sits firmly without wobbling. This also helps protect your floors.

Image: A detailed view of the integrated charging station, highlighting its two AC outlets, one USB port, and one Type-C port for convenient device charging.

Maintenance

To keep your console table in optimal condition, follow these simple maintenance guidelines:

• Cleaning: Wipe the table surfaces with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
• Spills: Promptly clean up any spills to prevent staining, especially on the engineered wood surface.
• Regular Checks: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.

Safety Information

Your safety is important. Please adhere to the following safety precautions:

• Anti-Tip Device: Always secure the anti-tip device to the wall to prevent accidental tipping, especially in households with children or pets.
• Weight Capacity: Do not exceed the maximum weight recommendation of 55 pounds on the tabletop.
• Pinch Points: Be cautious of pinch points during assembly and when moving the table.
• Electrical Safety: Ensure the power cord is not pinched or damaged. Do not open the charging station unit. If the outlet is not working or difficult to plug into, discontinue use and contact customer support.
• Placement: Place the table on a stable, level surface. Avoid placing it in areas with excessive moisture or direct heat.

Image: A visual breakdown of the table's key features, including adjustable feet for leveling, the textured wooden grain tabletop, the anti-tip device for safety, and the robust metal frame construction.

Troubleshooting

• Table is Wobbly: Adjust the individual feet at the bottom of the legs until the table is stable on your floor surface. Ensure all assembly screws are tightened.
• Charging Station Not Working: Check if the table's main power cord is securely plugged into a functional wall outlet. Ensure devices are properly connected to the outlets/ports. If issues persist, contact customer support.
• Difficulty Plugging into Outlets: Verify the alignment of the plug with the outlet. If there is a persistent issue, contact customer support.

Specifications

Image: A diagram illustrating the key dimensions and weight capacity of the console table.

Warranty and Support

For warranty information, product support, or to report any issues, please refer to the contact details provided with your purchase or visit the official SUPERJARE website. Please have your model number (7942ZC) and purchase information ready when contacting support.