Introduction
This manual provides instructions for the safe and proper use of your Paladone Minecraft Drowned Zombie Mini Icon Light. This icon light is designed to provide ambient lighting and features a design inspired by the Drowned character from the Minecraft game. Please read these instructions carefully before use and retain them for future reference.
Image: The Paladone Minecraft Drowned Zombie Mini Icon Light shown in its retail packaging, indicating it is an officially licensed product.
Package Contents
Verify that all items are present in the package:
- 1 x Paladone Minecraft Drowned Zombie Mini Icon Light
- This instruction manual
Note: 2x AA batteries are required for operation and are not included.
Setup
- Unpack the Icon Light: Carefully remove the Drowned Zombie Mini Icon Light from its packaging.
- Locate Battery Compartment: The battery compartment is located on the underside of the icon light's base.
- Install Batteries: Open the battery compartment cover. Insert 2x AA batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment. Close the battery compartment cover securely.
Image: The Drowned Zombie Mini Icon Light positioned on a desk, ready for use. This image shows the light in its unlit state.
Operating Instructions
The Drowned Zombie Mini Icon Light features a simple push-button operation.
- Power On: Press the push-button switch, typically located on the base of the unit, to turn the light on. The icon light will illuminate with an ocean blue and green glow.
- Power Off: Press the push-button switch again to turn the light off.
Image: The Drowned Zombie Mini Icon Light illuminated, casting a green and blue light, demonstrating its operational state.
Maintenance
- Cleaning: To clean the icon light, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Battery Replacement: When the light dims or stops functioning, replace the batteries. Follow the "Setup" instructions for battery installation. Always replace all batteries at the same time with new ones of the same type.
- Storage: If storing the icon light for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light is dim. | Batteries are low. | Replace with new AA batteries. |
Specifications
- Model Number: PP7999MCFV2
- Brand: Paladone
- Power Source: 2x AA Batteries (not included)
- Light Source Type: LED
- Switch Type: Push Button
- Shade Color: Blue, Green
- Material Type: Synthetic
- Indoor/Outdoor Usage: Indoor
- Dimensions (approximate): 11.8 cm (4.5 inches) tall
- Voltage: 120 Volts (internal LED system, battery powered)
- Is Product Cordless: Yes
Warranty Information
This product is sold without a manufacturer's warranty. Please refer to your retailer's return policy for any issues within the applicable return period.
Support
For further assistance or inquiries, please visit the official Paladone store or contact your retailer.
Paladone Store: https://www.amazon.com/stores/Paladone/page/7EA214DF-E4BD-42C9-AA12-8186BCE0F31D