Introduction
This manual provides detailed instructions for the installation, maintenance, and troubleshooting of your new ALVAR WPW10710203 Refrigerator Door Bin. This replacement part is designed to restore or enhance the storage capacity of your refrigerator door, specifically for compatible Whirlpool, Kenmore, and Maytag models. Please read this manual thoroughly before proceeding with installation to ensure proper fit and function.
Product Specifications
| Part Number | WPW10710203, W10710203, WPW10710203VP, W10451871, W10463668, 3436767 AP6023888, PS11757236, EAP11757236 |
| Dimensions (Approximate) | 16.3 inches (Length) x 7.1 inches (Width) x 3.54 inches (Height) |
| Material | Upgraded ABS Food Grade Material |
| Weight | Approximately 1.72 pounds (0.78 kg) |
| Color | Clear |
| Position | Designed for the RIGHT refrigerator side door section only. Not suitable for freezer side doors. |
Figure 1: Product Dimensions. Please verify these measurements against your existing bin or refrigerator space.
Compatibility
The ALVAR WPW10710203 Refrigerator Door Bin is compatible with various models from Whirlpool, Kenmore, and Maytag refrigerators. It is crucial to verify your refrigerator's model number and the dimensions of your existing bin to ensure proper fitment.
Compatible Brands:
- Whirlpool
- Kenmore
- Maytag
Example Compatible Models (Partial List):
Whirlpool: WRS571CIHZ00, WRS571CIHZ01, WRS576FIDB01, WRS576FIDM01, WRS576FIDW01, WRS586FLDB00, WRS586FLDB01, WRS586FLDM00, WRS586FLDM01, WRS586FLDM03, WRS586FLDW00, WRS586FLDW01, WRS586FLDW03, WRS588FIHB00, WRS588FIHV00, WRS588FIHW00, WRS588FIHZ00, WRSA71CIHN00, WRSA71CIHZ00, WRSA88FIHN00, WRSA88FIHZ00, and others in WRS571, WRS576, WRS586, WRS588, WRSA71, WRSA88 series.
Kenmore: Models starting with 106 (e.g., 10641122210, 10650022210, etc.)
Maytag: MSF21D4MDE01, MSF21D4MDE02, MSF25D4MDE02, MSF25D4MDE03, MSF25D4MDH02, MSF25D4MDM02, and others in MSF21, MSF25 series.
For a comprehensive list, please refer to the product listing or consult your refrigerator's user manual.
Figure 2: Compatible Refrigerator Models and Bin Placement.
Installation
Installing the ALVAR WPW10710203 Refrigerator Door Bin is a straightforward process. Ensure your refrigerator is unplugged or the circuit breaker is off before beginning any work, especially if you are replacing an electrical component. For a simple bin replacement, this step may not be strictly necessary, but it is good practice for appliance work.
Steps for Installation:
- Identify the Correct Location: The WPW10710203 bin is designed for the RIGHT refrigerator side door. Some refrigerator configurations may have specific slots for this bin. Refer to your refrigerator's internal layout or existing bins to determine the correct placement.
Figure 3: Identifying the correct bin placement on your refrigerator door.
- Remove Old Bin (if applicable): If you are replacing a broken bin, carefully lift it out of its slots. Note how the old bin was seated to assist with installing the new one.
- Verify Part Number and Size: Before inserting the new bin, double-check that the part number on the bin matches the required replacement part for your model and that its dimensions (16.3 x 7.1 x 3.54 inches) are correct for the intended slot.
Figure 4: Key steps for verifying and installing the door bin.
- Insert New Bin: Align the tabs or grooves on the sides of the new ALVAR WPW10710203 door bin with the corresponding slots on the refrigerator door. Gently push down until the bin clicks securely into place. Do not force the bin; if it does not fit easily, re-check compatibility and orientation.
- Test Stability: Once installed, gently push down on the bin to ensure it is firmly seated and stable. It should not wobble or feel loose.
Figure 5: The ALVAR WPW10710203 Refrigerator Door Bin.
Maintenance
To ensure the longevity and cleanliness of your ALVAR refrigerator door bin, follow these simple maintenance guidelines:
- Cleaning: Regularly clean the bin with mild soap and warm water. Avoid abrasive cleaners or harsh chemicals, as these can damage the plastic.
- Drying: Thoroughly dry the bin before placing it back into the refrigerator.
- Avoid Overloading: While the bin is made from durable, upgraded ABS material, avoid placing excessively heavy items in it, which could stress the plastic or mounting points over time.
- Temperature Extremes: Do not expose the bin to extreme heat (e.g., dishwasher hot cycles) as this may cause warping or damage. Hand washing is recommended.
Figure 6: Benefits of the upgraded material, contributing to durability.
Troubleshooting
If you encounter issues with your new door bin, consider the following common problems and solutions:
- Bin Does Not Fit:
- Ensure you are attempting to install it on the RIGHT refrigerator side door, not the freezer side.
- Double-check your refrigerator's exact model number against the compatible models list.
- Verify the dimensions of the bin (16.3 x 7.1 x 3.54 inches) against the space in your refrigerator door. Some bins may look similar but have slightly different dimensions.
- Confirm that the part number of the bin matches the required replacement part for your appliance.
- Bin Feels Loose or Wobbly:
- Ensure the bin is fully seated in its designated slots. Apply gentle, even pressure until it clicks into place.
- Inspect the refrigerator door's mounting slots for any obstructions or damage that might prevent a secure fit.
If these steps do not resolve the issue, please contact customer support.
Warranty and Support
The ALVAR WPW10710203 Refrigerator Door Bin comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the quality of the product under normal use.
For any questions, concerns, or warranty claims, please contact ALVAR customer support through the platform where you purchased the product. Please have your purchase details and product model number ready to assist the support team.
