Real HD IPC-6VD28A

Download PDF
Contents

Real HD 6MP PoE IP Vandal Dome Security Camera User Manual

Model: IPC-6VD28A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Real HD 6MP PoE IP Vandal Dome Security Camera. This camera is designed for outdoor surveillance, offering high-resolution video, robust weather protection, and Power over Ethernet (PoE) connectivity.

The Real HD 6MP PoE IP Vandal Dome Security Camera features 6MP Super HD video recording, a 2.8mm wide-angle fixed lens, H.265 compression, IP67 weather resistance, and IK10 vandal protection. It is compatible with Uniview NVR, Svnology, and iSpy software via ONVIF protocol.

2. Product Features

  • 6MP Super HD Resolution: Provides superior quality video for detailed surveillance.
  • 2.8mm Wide Angle Lens: Offers a 108-degree field of view to cover large areas.
  • IP67 Weather Rated Enclosure: Designed for outdoor use, protected against dust and water immersion.
  • IK10 Vandal Protection: Robust housing provides resistance against physical impact.
  • Power over Ethernet (PoE): Simplifies installation by providing power and data over a single Ethernet cable.
  • Dual H.265/H.264 Compression: Efficient video compression reduces storage requirements and bandwidth usage.
  • 100 Feet Night Vision: Equipped with infrared LEDs for clear monitoring in low-light conditions.
  • ONVIF Protocol Support: Ensures compatibility with various NVRs and surveillance software.
  • Remote Access: Monitor your property from anywhere using compatible applications.

3. Package Contents

The product package typically includes:

  • Real HD 6MP PoE IP Vandal Dome Security Camera (Model IPC-6VD28A)
  • Mounting hardware (screws, wall anchors)
  • Waterproof connector for Ethernet cable
  • User Manual

4. Setup

4.1 Physical Installation

The camera is designed for ceiling mount installation. Ensure the mounting surface is strong enough to support the camera's weight.

  1. Choose a suitable location for optimal surveillance coverage.
  2. Use the provided mounting template (if available) to mark drill holes.
  3. Drill pilot holes and insert wall anchors if necessary.
  4. Secure the camera base to the mounting surface using the provided screws.
  5. Adjust the camera's angle for the desired field of view.
Real HD 6MP PoE IP Vandal Dome Security Camera dimensions and features

Image: Real HD 6MP PoE IP Vandal Dome Security Camera with dimensions (4.4" diameter, 3.2" height) and key features like 2.8mm lens, 18pcs Infrared LEDs for 20-30m night vision, and IP66 housing.

Real HD 6MP PoE IP Vandal Dome Security Camera with IP67 Waterproof rating

Image: The camera mounted outdoors under a roof, with rain effects, highlighting its IP67 waterproof rating and operating temperature range of -22°F to +140°F and humidity 10%-90% RH.

Real HD 6MP PoE IP Vandal Dome Security Camera with IK10 Vandal Dome protection

Image: The camera with a hand holding a hammer next to it, illustrating its IK10 Vandal Dome protection against impact.

4.2 Power and Network Connection (PoE)

This camera supports Power over Ethernet (PoE), allowing both power and data transmission through a single Ethernet cable. Connect the camera to a PoE-enabled NVR or a PoE switch.

  1. Connect one end of an Ethernet cable to the camera's Ethernet port.
  2. Connect the other end of the Ethernet cable to a PoE port on your NVR or PoE switch.
  3. Ensure the NVR or PoE switch is powered on. The camera will power up automatically.
Diagram showing how to connect the Real HD 6MP PoE IP Vandal Dome Security Camera to an NVR

Image: A diagram illustrating the connection of the camera to an NVR system. It shows the camera connecting to the NVR's PoE ports, with the NVR connected to a monitor, mouse, router, and power. An alternative connection via a PoE switch to a router is also shown.

4.3 NVR/Software Integration

The camera is compatible with Uniview NVR, Svnology, and iSpy software through the ONVIF protocol. It is not compatible with Reolink, Lorex, or Amcrest systems.

  1. Access your NVR or surveillance software interface.
  2. When adding the camera, select the ONVIF protocol.
  3. Manually add the camera using its IP address if automatic detection fails.
  4. Refer to your NVR or software manual for specific steps on adding ONVIF cameras.

5. Operating Instructions

5.1 Accessing the Camera

Once connected to your NVR or network, you can access the camera's live view and settings through:

  • Your connected NVR monitor.
  • A web browser by entering the camera's IP address.
  • A compatible mobile application or desktop software.
Remote access to Real HD security camera from various devices

Image: A woman viewing security footage on her smartphone, with a multi-device display (tablet, desktop, smartphone) showing remote access capabilities for the camera.

5.2 Video Compression

The camera supports H.265 and H.264 video compression formats. H.265 offers improved efficiency, significantly reducing file sizes and storage requirements while maintaining video quality.

Comparison of H.265+ and H.264 video compression efficiency

Image: A comparison showing H.265+ compression using 25% of video transmission stream and storage space compared to H.264 using 100%, demonstrating the efficiency of H.265+.

5.3 Night Vision

The camera is equipped with infrared LEDs, providing up to 100 feet of night vision for clear monitoring in complete darkness. The camera automatically switches between day and night modes based on ambient light conditions.

5.4 Motion Detection and Smart Features

The camera supports motion detection and may include smart human/vehicle detection capabilities. Configure these settings through your NVR or camera's web interface to receive alerts and optimize recording.

Video: Demonstration of Smart Human/Vehicle Detection IP Camera features, showing vehicles and people being detected and highlighted in a busy street scene.

6. Maintenance

6.1 Cleaning

Regularly clean the camera lens and housing to ensure optimal image quality. Use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the camera's finish or lens coating.

6.2 Firmware Upgrades

Periodically check for firmware updates to ensure your camera has the latest features and security enhancements. Firmware upgrade instructions are typically provided with the update package or available on the manufacturer's support website.

6.3 Environmental Protection

The camera's IP67 and IK10 ratings provide protection against harsh weather and vandalism. However, avoid directing high-pressure water jets directly at the camera and ensure all cable connections are properly sealed using the provided waterproof connectors.

7. Troubleshooting

  • No Power/No Video: Ensure the Ethernet cable is securely connected to both the camera and a PoE-enabled port on your NVR or switch. Verify the NVR/switch is powered on.
  • Camera Not Detected by NVR: Confirm the NVR supports ONVIF protocol. Ensure the camera and NVR are on the same network segment. Try manually adding the camera using its IP address and selecting ONVIF.
  • Poor Image Quality: Check the camera lens for dirt or obstructions. Ensure sufficient lighting for optimal performance, especially at night. Verify resolution settings in your NVR/software.
  • Motion Detection Not Working: Review motion detection settings in your NVR/software. Ensure detection zones are correctly configured and sensitivity is appropriate.
  • Compatibility Issues: This camera is not compatible with Reolink, Lorex, or Amcrest systems. Ensure your NVR or software supports ONVIF.

For further assistance, please contact Real HD US Local Tech Support during business hours (9 am-5 pm CST).

8. Specifications

FeatureSpecification
Model NumberIPC-6VD28A
Video Capture Resolution6 MP
Lens2.8mm Fixed Lens
Field of View (FOV)108 degrees
Indoor/Outdoor UsageOutdoor
Weather ResistanceIP67 (Waterproof)
Vandal ResistanceIK10
Connectivity TechnologyWired (PoE)
Connectivity ProtocolONVIF
Video CompressionH.265/H.264
Night Vision Range100 Feet
Power SourceCorded Electric (PoE)
Voltage12 Volts (DC)
Wattage5 watts
Dimensions (L x W x H)5.4 x 5.3 x 5.2 inches
Item Weight1.39 pounds (0.63 Kilograms)
Frame Rate15 fps
Special FeatureOne-way audio

9. Warranty and Support

For warranty information, please refer to the product packaging or contact your retailer. Real HD offers US Local Tech Support for assistance with product setup, operation, and troubleshooting.

US Local Tech Support Hours: 9 am - 5 pm CST

Please contact the seller for technical support inquiries.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.