simplehuman 14 oz. Touch-Free Rechargeable Sensor Liquid Soap Pump Dispenser

Introduction

The simplehuman 14 oz. Touch-Free Rechargeable Sensor Liquid Soap Pump Dispenser is designed for convenient, touch-free soap dispensing, promoting hygiene by minimizing germ transfer. This larger model holds 50% more soap than standard pumps, reducing refill frequency. It features a clog-proof tubing pump for precise and consistent flow, and a silicone valve to prevent messy drips. The dispenser offers variable dispense control, allowing users to adjust soap volume by hand proximity to the sensor. Refills are made easy with a wide opening, and a QR code under the lid facilitates soap reordering. The unit is waterproof for easy cleaning and is rechargeable, with one charge lasting up to 8 months. It is optimized for simplehuman soap but also works with hand sanitizer.

Key Features

• Increased Capacity: This 14 oz. model holds 50% more soap, requiring less frequent refills.
• Fast, Precise, Clog-Proof Dispensing: An internal peristaltic pump ensures quick, consistent flow of high-viscosity soap without clogging.
• Variable Dispense Feature: Control the amount of soap dispensed by positioning your hand closer for less or farther away for more.
• Easy Refill: A wide opening facilitates quick and drip-free soap refills.
• Waterproof Design: The dispenser is waterproof for easy cleaning; simply flip the off switch and rinse.
• Long-Lasting Rechargeable Battery: One charge can last up to 8 months, providing extended use.

Figure 1: Front view of the simplehuman 14 oz. Touch-Free Rechargeable Sensor Liquid Soap Pump Dispenser.

Setup

1. Charging and Battery Installation

The dispenser comes with a rechargeable Lithium Ion battery. Use the included wireless charger to charge the unit. A full charge can last up to 8 months.

Figure 2: Wireless charging of the soap dispenser.

2. Filling the Dispenser

1. Remove the top lid of the dispenser.
2. Pour liquid soap or hand sanitizer into the wide refill opening.
3. Replace the top lid securely.

For optimal performance, simplehuman soap is recommended. A QR code located under the lid can be scanned to reorder soap.

Figure 3: Wide opening for easy refilling.

Operating Instructions

1. Dispensing Soap

To dispense soap, simply place your hand under the sensor. The touch-free operation ensures a hygienic experience.

Figure 4: Touch-free soap dispensing.

2. Adjusting Dispense Volume

The dispenser features a variable dispense control. Position your hand closer to the sensor for a smaller amount of soap, or farther away for a larger amount.

Maintenance

1. Cleaning

The simplehuman sensor pump is waterproof, making it easy to clean. To prevent accidental dispensing during cleaning, ensure the dispenser is switched off. You can then rinse the unit under running water.

Figure 5: Cleaning the waterproof dispenser.

2. Refilling

Refill the dispenser when the soap level is low by following the steps in the "Filling the Dispenser" section. The wide opening is designed for quick and mess-free refills.

Troubleshooting

If the dispenser is not functioning as expected, please check the following:

• Ensure the battery is sufficiently charged.
• Verify that the soap reservoir is not empty.
• Check for any obstructions around the sensor or dispenser nozzle.
• Confirm that the dispenser is placed on a stable, flat surface.

For persistent issues, contact simplehuman customer support.

Specifications

Figure 6: Product Specifications.

Figure 7: Product Dimensions.

Warranty and Support

Please note that warranties on purchases from 3rd party sellers are not honored by simplehuman. For warranty claims or technical support, please contact simplehuman directly through their official website or customer service channels. Ensure you retain your proof of purchase from an authorized retailer.