1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Growatt MOD 8000TL3-XH VDE Hybrid Inverter. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent potential hazards.
The Growatt MOD 8000TL3-XH is an advanced hybrid inverter designed for solar energy storage and conversion, offering a maximum efficiency of approximately 98%. It features VDE approval, WiFi connectivity, an OLED display, and a power output of 8000 W. Its robust design is corrosion-resistant and intelligent, ensuring reliable, maintenance-free operation.
2. Safety Information
WARNING: High Voltage! Only qualified personnel should perform installation and maintenance procedures.
- Always disconnect all power sources (PV, battery, and AC grid) before performing any service or maintenance.
- Ensure proper grounding of the inverter according to local electrical codes.
- Do not operate the inverter if any part is damaged or appears to be malfunctioning.
- Keep children and unauthorized personnel away from the inverter.
- Install the inverter in a well-ventilated area, away from flammable materials and direct sunlight.
3. Product Overview
The Growatt MOD 8000TL3-XH inverter integrates multiple functions to optimize solar energy utilization. Key features include an LED display for status indication, a WiFi connection for remote monitoring, a DC disconnector switch for safety, and integrated DC/AC surge arresters. It also includes advanced protection mechanisms such as insulation resistance detection, ground monitoring, grid monitoring, islanding detection, differential current monitoring, and AFCI protection.
The inverter is equipped with 2 Maximum Power Point Trackers (MPPTs), each supporting 1 string, allowing for flexible solar array configurations.
3.1. Inverter Components

Figure 1: Side view of the Growatt MOD 8000TL3-XH inverter, highlighting the DC disconnector switch for safe power isolation.

Figure 2: Bottom view of the Growatt MOD 8000TL3-XH inverter, illustrating the connection terminals for PV input (PV1+, PV1-, PV2+, PV2-), battery (BAT+, BAT-), communication (COM), USB, and AC output.
4. Setup and Installation
Proper installation is crucial for the inverter's performance and safety. It should only be performed by certified electricians or trained professionals.
4.1. Mounting Location
Choose a mounting location that is:
- Well-ventilated to ensure adequate heat dissipation.
- Protected from direct sunlight, rain, and extreme temperatures.
- Away from flammable or explosive materials.
- Structurally sound to support the inverter's weight (approximately 14 kg).
4.2. Electrical Connections
- Grounding: Connect the inverter to an earth ground using a dedicated grounding cable according to local electrical codes.
- DC Input (PV): Connect the positive and negative cables from your solar PV strings to the designated PV input terminals (PV1+, PV1-, PV2+, PV2-). Ensure correct polarity.
- Battery Connection: Connect the battery bank to the BAT+ and BAT- terminals. Verify correct polarity and secure connections.
- AC Output: Connect the AC output cables to your electrical grid or load. Ensure all AC connections are secure and comply with local regulations.
- Communication: Insert the included WiFi key into the designated port for network connectivity and remote monitoring.
Before powering on, double-check all connections for tightness and correct wiring.
5. Operating Instructions
5.1. Start-up Procedure
- Ensure all electrical connections are correctly made and secure.
- Turn on the AC circuit breaker connected to the inverter's output.
- Turn the DC disconnector switch on the side of the inverter to the "ON" position (refer to Figure 1).
- The inverter will perform a self-test. The OLED display will show the start-up sequence and then begin displaying operational data.
- The inverter will automatically start converting solar energy and managing battery charging/discharging based on its programmed settings.
5.2. Monitoring
The OLED display provides real-time operational data such as PV input, AC output, battery status, and energy production. For detailed monitoring and system management, use the Growatt monitoring platform accessible via the WiFi connection. The WiFi key allows for remote access to performance data and system alerts.
5.3. Shutdown Procedure
- Turn off the AC circuit breaker connected to the inverter's output.
- Turn the DC disconnector switch on the side of the inverter to the "OFF" position.
- Wait for the inverter's OLED display to power off completely, indicating that internal capacitors have discharged.
6. Maintenance
The Growatt MOD 8000TL3-XH inverter is designed to be largely maintenance-free. However, regular inspections are recommended to ensure optimal performance and longevity.
- Visual Inspection: Periodically inspect the inverter for any visible damage, loose connections, or signs of corrosion.
- Cleaning: Ensure the ventilation openings are clear of dust and debris. Clean the exterior of the inverter with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Connection Checks: Annually, verify the tightness of all electrical connections (DC, AC, and ground).
- Firmware Updates: Check the official Growatt website for available firmware updates to ensure optimal performance and access to new features.
7. Troubleshooting
This section provides solutions for common issues. For more complex problems or error codes not listed, please contact technical support.
7.1. Common Issues and Solutions
- Inverter Not Powering On:
Possible Causes: DC switch off, AC breaker off, loose connections, insufficient PV input.
Solutions: Ensure DC switch is ON. Check AC breaker. Verify all cable connections are secure. Check PV panel output voltage. - Low Power Output:
Possible Causes: Shading on PV panels, dirty panels, battery not adequately charged, grid issues.
Solutions: Clear any shading. Clean PV panels. Check battery charge level. Verify grid connection status. - Error Code Displayed:
Possible Causes: Internal fault, grid anomaly, specific system issue.
Solutions: Note the specific error code. Refer to the Growatt monitoring platform for detailed explanations or contact technical support with the error code. - No WiFi Connection:
Possible Causes: WiFi key not properly inserted, network configuration issues, router problems.
Solutions: Ensure the WiFi key is securely inserted. Check your local network settings and router functionality.
8. Specifications
The following table outlines the key technical specifications for the Growatt MOD 8000TL3-XH VDE Hybrid Inverter.

Figure 3: Technical specifications table providing detailed electrical and mechanical parameters for the Growatt MOD 8000TL3-XH inverter, including input/output ratings, efficiency, and dimensions.
| Specification | Value |
|---|---|
| Brand | GROWATT |
| Model Name | MOD 8000TL3-XH |
| Recommended Product Use | Solar energy storage and conversion for domestic power supply |
| Power Source | Solar Power |
| Output Power | 8000 Watts |
| Battery Capacity | 34.78 Amp-hours |
| Included Components | WiFi Key |
| Efficiency | ≈ 98% |
| Output Voltage | 230 Volts |
| Number of MPPTs | 2 |
| Strings per MPPT | 1 |
| Protection Class | IP66 |
| Dimensions (W/H/D) | 425/387/178 mm |
| Weight | 14 kg |
9. Warranty and Support
The Growatt MOD 8000TL3-XH inverter typically comes with a 10-year manufacturer's warranty. Please refer to your purchase documentation or the official Growatt website for specific warranty terms and conditions, as these may vary by region and distributor.
For technical support, troubleshooting assistance, or warranty claims, please contact your authorized Growatt dealer or visit the official Growatt support portal. When contacting support, please have your inverter's model number and serial number ready.