Cisco CS-BAR-T-C-K9
Cisco CS-BAR-T-C-K9 User Manual
Webex Room Bar with Table Stand Navigator
Product Overview
The Cisco CS-BAR-T-C-K9 is a comprehensive video conferencing solution designed for modern meeting spaces. It integrates a powerful camera, speakers, and microphones into a single device, complemented by a dedicated touch-panel controller for intuitive interaction. This system is ideal for enhancing collaboration and communication in various professional environments.
Image: The Cisco Webex Room Bar (top) and the Navigator touch controller (bottom right).
Package Contents
Upon unboxing, verify that all components are present:
- Cisco Webex Room Bar (CS-BAR-T-C-K9)
- Table Stand for Navigator
- Cisco Webex Navigator Touch Controller
- Power Adapter and Cables
- Mounting Hardware (if applicable, for wall or display mounting)
- Documentation (Quick Start Guide, Safety Information)
Note: The exact contents may vary slightly based on the specific kit purchased.
Setup Guide
1. Physical Placement
Position the Cisco Webex Room Bar centrally below or above your display. Ensure it has a clear line of sight to participants and is not obstructed. The Navigator touch controller should be placed on a table within easy reach of users.
2. Cable Connections
- Power: Connect the power adapter to the Room Bar and then to a power outlet.
- HDMI Out: Connect an HDMI cable from the Room Bar's HDMI OUT port to your display's HDMI input.
- HDMI In (Optional): If you plan to share content from a laptop, connect an HDMI cable from the Room Bar's HDMI IN port to your laptop.
- Network: Connect an Ethernet cable from the Room Bar's LAN port to your network switch or router.
- Navigator Connection: The Navigator typically connects wirelessly or via a dedicated cable to the Room Bar. Follow the on-screen prompts for pairing if necessary.
3. Initial Configuration
Once powered on, the Room Bar will guide you through the initial setup process on the connected display and Navigator. This includes network settings, time zone, and pairing the Navigator.
Operating Instructions
Using the Navigator Touch Controller
The 10-inch Navigator touch controller (Screen Resolution: 1920 x 1080 pixels) is your primary interface for controlling the Cisco Webex Room Bar. It runs on an Android operating system.
- Making a Call: Tap the "Call" icon and enter a contact, URI, or select from your directory.
- Joining a Meeting: If integrated with your calendar, tap the "Join" button for scheduled meetings.
- Sharing Content: Tap the "Share" icon. You can share wirelessly (Webex Share) or via a connected HDMI cable.
- Camera Control: Adjust camera pan, tilt, and zoom using the on-screen controls.
- Volume Control: Use the volume slider or buttons on the Navigator to adjust audio levels.
Wireless Connectivity
The device supports 802.11ac wireless connectivity for network access and certain wireless sharing features.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the surfaces of the Room Bar and Navigator. Do not use liquid cleaners or aerosols directly on the devices.
- Software Updates: Ensure the device's software is kept up-to-date. Updates are typically managed through your organization's IT department or the Cisco Webex Control Hub.
- Ventilation: Ensure proper airflow around the Room Bar to prevent overheating. Do not block ventilation openings.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; power outlet issue. | Check power cable connections. Try a different power outlet. |
| No video on display | HDMI cable disconnected; incorrect display input. | Verify HDMI cable connection from Room Bar to display. Select correct HDMI input on display. |
| No audio | Volume too low; external audio system issue. | Increase volume on Navigator. Check external audio system connections if used. |
| Navigator not responding | Navigator battery low; connection issue. | Charge Navigator. Re-pair Navigator with Room Bar if necessary (refer to setup guide). |
| Cannot connect to network | Ethernet cable issue; incorrect network settings. | Check Ethernet cable. Verify network settings on the device or through IT support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | CS-BAR-T-C-K9 |
| Brand | Cisco |
| Description | Webex Room Bar with Table Stand Navigator |
| Operating System | Android |
| Screen Size (Navigator) | 10 Inches |
| Screen Resolution (Navigator) | 1920 x 1080 pixels |
| Wireless Type | 802.11ac |
| Processor Brand | Intel |
| Memory Storage Capacity | 64 GB |
| Item Weight | 2.2 pounds |
| Package Dimensions | 3.94 x 0.79 x 0.79 inches |
| Batteries | Product Specific batteries required. |
Warranty and Support
For warranty information and technical support, please refer to the official Cisco documentation included with your product or visit the Cisco support website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Online Support: www.cisco.com/go/support
Contact Support: Refer to your regional Cisco contact information for phone or email support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.