Introduction
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Ibanez J Custom RG8570 Electric Guitar. Please read this manual thoroughly to ensure optimal performance and longevity of your instrument. Keep this manual for future reference.
Product Overview
The Ibanez J Custom RG8570 is a high-performance electric guitar featuring premium components and craftsmanship. Key features include:
- Solidbody Electric Guitar with Mahogany Body
- Lo-Pro Edge Tremolo System
- H-S-H Pickup Configuration (2 Humbucking, 1 Single-coil)
- Ebony Fingerboard with Tree of Life Inlay

Figure 1: Front view of the Ibanez J Custom RG8570 Electric Guitar, showcasing its Royal Blue Sapphire finish and hardware.
Setup
1. Unboxing and Initial Inspection
Carefully remove the guitar from its packaging. Inspect the instrument for any signs of damage that may have occurred during shipping. Ensure all included accessories, such as the tremolo arm and adjustment wrenches, are present.
2. Tuning
Tune the guitar using a reliable electronic tuner. The Lo-Pro Edge tremolo system requires specific tuning procedures. Ensure the locking nuts at the headstock are loosened before tuning the main tuners. Once tuned, tighten the locking nuts and use the fine tuners on the tremolo bridge for minor adjustments.

Figure 2: Headstock detail, showing the Ibanez logo, locking nuts, and Gotoh tuners.
3. Tremolo System Adjustment (Lo-Pro Edge)
The Lo-Pro Edge tremolo is factory-set. However, environmental changes or string gauge changes may require adjustment. Refer to the official Ibanez tremolo manual for detailed instructions on spring tension, bridge height, and intonation adjustments. Incorrect adjustments can affect tuning stability and playability.
Operating
1. Controls
The RG8570 features a standard control layout:
- Volume Knob: Controls the overall output level of the guitar.
- Tone Knob: Adjusts the treble response, from bright to warm.
- 5-Way Pickup Selector Switch: Selects different pickup combinations.

Figure 3: Body detail, highlighting the DiMarzio pickups, Lo-Pro Edge tremolo, and recessed control knobs.
2. Pickup Selector Positions
- Position 1 (Bridge): Bridge Humbucker (DiMarzio Tone Zone) for powerful, aggressive tones.
- Position 2: Bridge Humbucker (split coil) + Middle Single-coil (DiMarzio True Velvet) for bright, articulate tones.
- Position 3 (Middle): Middle Single-coil (DiMarzio True Velvet) for classic single-coil sounds.
- Position 4: Neck Humbucker (split coil) + Middle Single-coil (DiMarzio True Velvet) for clear, bell-like tones.
- Position 5 (Neck): Neck Humbucker (DiMarzio Air Norton) for warm, smooth lead tones.
Maintenance
1. Cleaning
Regularly wipe down the guitar body, neck, and hardware with a soft, lint-free cloth after each use. For the body, use a guitar-specific polish sparingly. For the ebony fretboard, use a fretboard conditioner periodically to prevent drying and cracking.
2. String Replacement
Replace strings regularly to maintain tone and playability. When replacing strings on a Lo-Pro Edge tremolo, it is recommended to replace them one at a time to maintain bridge balance. Use the same gauge strings to avoid significant tremolo adjustments.
3. Hardware Inspection
Periodically check all screws and nuts for tightness, especially on the tuners, bridge, and strap buttons. Do not overtighten. Lubricate moving parts of the tremolo system with a small amount of specialized lubricant if squeaking or stiffness occurs.

Figure 4: Rear view of the guitar body, showing access plates for electronics and tremolo springs.
Troubleshooting
- No Sound: Check cable connections, amplifier power, guitar volume knob, and pickup selector position. Ensure the guitar cable is fully inserted into both the guitar and amplifier.
- Buzzing/Fretting Out: This can be caused by low action, uneven frets, or improper neck relief. Consult a qualified guitar technician for adjustments.
- Poor Tuning Stability: Ensure strings are properly stretched, locking nuts are tight (but not overtightened), and the tremolo system is balanced. Worn strings can also cause tuning issues.
- Scratchy Pots/Switch: Dust or dirt can accumulate in the volume/tone pots or pickup selector switch. Use a contact cleaner designed for electronics, applied sparingly.
Specifications
| Feature | Specification |
|---|---|
| Brand | Ibanez |
| Model Number | RG8570-RBS2023 |
| Color | Royal Blue Sapphire |
| Body Material | Mahogany with AAA Flamed-Maple Top |
| Neck Material Type | 5-piece Maple/Wenge |
| Fretboard Material Type | Ebony Wood |
| Guitar Pickup Configuration | H-S-H (DiMarzio Tone Zone, True Velvet, Air Norton) |
| Guitar Bridge System | Lo-Pro Edge Tremolo |
| Hand Orientation | Right |
| Item Weight | 24.3 Pounds |
| Item Dimensions | 45.1 x 17.8 x 6.1 inches |
| Included Components | Gotoh strap lock pins, Tree of life fingerboard inlay |
What's in the Box
Your Ibanez J Custom RG8570 package includes:
- Ibanez J Custom RG8570 Electric Guitar
- Gotoh strap lock pins
- Tremolo arm
- Adjustment wrenches
Warranty Information
The Ibanez J Custom RG8570 Electric Guitar comes with a 2-year warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your instrument or visit the official Ibanez website.
Support
For further assistance, technical support, or service inquiries, please contact your authorized Ibanez dealer or visit the official Ibanez support website. When contacting support, please have your guitar's model number and serial number available.