UpBright 24V AC/DC Adapter User Manual for Wahoo Fitness WF122 Kickr Climb Simulator

1. Introduction

This manual provides essential information for the safe and effective use of your UpBright 24V AC/DC Adapter. This power supply is designed to provide stable and reliable power to compatible devices, including the Wahoo Fitness Model WF122 Kickr Climb Simulator and other equipment requiring a 24V DC, 10A power source.

Please read this manual thoroughly before using the adapter and retain it for future reference.

UpBright 24V AC/DC Adapter with power cord

Figure 1: UpBright 24V AC/DC Adapter. This image shows the main adapter unit with its attached DC output cable and a separate AC input power cord.

2. Safety Information

To prevent injury or damage to your device, always observe the following safety precautions:

Ensure the adapter's voltage and current ratings match your device's requirements. This adapter provides 24V DC at 10A.
Do not expose the adapter to water, moisture, or extreme temperatures.
Avoid dropping or subjecting the adapter to strong impacts.
Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
Disconnect the adapter from the power outlet when not in use for extended periods.
Keep out of reach of children.
Use only the provided AC power cord or a compatible, certified replacement.

This adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe operation.

3. Package Contents

Verify that all items are present in the package:

UpBright 24V AC/DC Adapter
AC Power Cord (suitable for your region)

Various AC power cords for different regions

Figure 2: Example of AC power cords. The package includes one AC power cord appropriate for the region of purchase (e.g., US, EU, UK, AU).

4. Specifications

Input Voltage	100-240VAC, 50/60Hz (Worldwide Compatible)
Output Voltage	24V DC
Output Current	10 Amps
Output Wattage	240 Watts
Connector Type	Barrel Connector
Protection Features	OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection)
Compatible Devices	Wahoo Fitness Model WF122, WFBKTR5, WFBKTRS Kickr Climb Simulator, SOY-2401000-244, SOY-2400100-244
Product Dimensions	Approximately 9 x 6 x 2 inches
Item Weight	Approximately 1.25 pounds

5. Setup

Follow these steps to connect your UpBright AC/DC Adapter:

Verify Compatibility: Ensure your device requires a 24V DC input and its current draw does not exceed 10A. Check your device's power input specifications.
Connect AC Power Cord: Plug the included AC power cord into the adapter's AC input port.
Connect to Device: Insert the barrel connector of the adapter's DC output cable firmly into your device's power input jack.
Plug into Wall Outlet: Plug the AC power cord into a standard wall outlet (100-240VAC).
Power On Device: Once connected, you can power on your device.

Close-up of the barrel connector of the UpBright AC/DC adapter

Figure 3: Barrel Connector. This image shows a close-up of the barrel-type DC output connector, which plugs into the compatible device.

6. Operating Instructions

The UpBright 24V AC/DC Adapter operates automatically once connected. It provides a constant 24V DC output to your compatible device.

Ensure all connections are secure before powering on your device.
The adapter is designed for continuous use within its specified operating parameters.
If your device has an ON/OFF switch, use that to control power to the device. The adapter itself does not have a power switch.

7. Maintenance

The UpBright AC/DC Adapter requires minimal maintenance:

Cleaning: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cables to prevent damage.
Inspection: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires, cracked casing, or bent pins. If damage is found, discontinue use immediately.

8. Troubleshooting

If you encounter issues with your adapter, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Device not powering on.	No power from wall outlet. Loose connections. Incorrect adapter for device. Damaged adapter or cable.	Test the wall outlet with another device. Ensure AC cord and DC barrel connector are fully inserted. Verify adapter specifications match device requirements. Inspect adapter and cables for damage. Discontinue use if damaged.
Adapter feels excessively hot.	Overload (device drawing too much current). Poor ventilation.	Ensure device current draw is within 10A. Place adapter in a well-ventilated area, away from heat sources. If overheating persists, discontinue use.
Intermittent power to device.	Loose connection. Damaged cable or connector.	Check all connections. Inspect cables and connectors for damage.

If the problem persists after trying these solutions, please contact customer support.

9. Warranty and Support

Your UpBright 24V AC/DC Adapter comes with a warranty to ensure your satisfaction.

Refund Policy: UpBright offers a 30-day refund policy from the date of purchase.
Exchange Policy: The product is covered by a 24-month exchange policy for manufacturing defects.

For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official UpBright website.

UpBright AC/DC adapter with a warning label and power cord

Figure 4: UpBright AC/DC Adapter. This image shows another view of the adapter, highlighting its warning labels and cable management strap.

UPBRIGHT WF122

UpBright 24V AC/DC Adapter User Manual