1. Introduction
Thank you for choosing the MAXTO M2 Motorcycle Bluetooth Headset. This device is designed to enhance your riding experience by providing seamless communication, entertainment, and navigation capabilities. Please read this manual thoroughly before use to ensure proper installation and operation.
Image 1.1: The MAXTO M2 Motorcycle Bluetooth Headset unit.
2. Package Contents
Verify that all items listed below are included in your package:
- MAXTO M2 Bluetooth Headset Unit
- Headset Speakers
- Microphone (Boom and Soft Wire options)
- Helmet Clamp Mount
- Adhesive Mount
- USB Type-C Charging Cable
- User Manual
- Velcro Pads for Speakers/Microphone
- Mounting Hardware (screws, wrench)
Image 2.1: All components included in the MAXTO M2 package.
3. Setup and Installation
3.1 Charging the Device
Before initial use, fully charge the MAXTO M2 unit. Connect the provided USB Type-C charging cable to the charging port on the device and to a USB power source. The indicator light will show charging status.
- Charging Time: Approximately 3 hours for a full charge.
- Battery Life: Up to 16 hours of Bluetooth usage, 200 hours standby time.
- Important: If the product will not be used for an extended period, charge it regularly every three months to maintain battery health.
Image 3.1: The MAXTO M2 features a Type-C charging port for convenient charging.
3.2 Helmet Installation
The MAXTO M2 is designed to fit various helmet types, including full-face, open-face, off-road, and half helmets. Choose between the clamp mount or adhesive mount based on your helmet's design and personal preference.
- Mounting the Unit: Securely attach the main unit to the side of your helmet using either the clamp mount (for helmets with a suitable edge) or the adhesive mount (for smooth surfaces). Ensure it is firmly in place.
- Speaker Placement: Position the speakers inside the helmet's ear pockets. Use the provided Velcro pads to secure them. Ensure speakers are aligned with your ears for optimal audio quality.
- Microphone Attachment: Attach the microphone to the inside of the helmet, positioning it close to your mouth but not directly in front to avoid wind noise. Use the boom microphone for open-face helmets and the soft wire microphone for full-face helmets.
- Cable Management: Route all cables neatly under the helmet padding to prevent interference and ensure comfort.
Image 3.2: The MAXTO M2 is compatible with various helmet styles, including full-face, Harley, off-road, and half helmets.
Image 3.3: Example of the MAXTO M2 unit installed on a motorcycle helmet.
3.3 Bluetooth Pairing
The MAXTO M2 utilizes Bluetooth 5.0 technology for stable connections with your mobile phone, GPS devices, and other Bluetooth intercom systems.
- Power On: Press and hold the power button until the indicator light flashes, indicating the device is on.
- Enter Pairing Mode: Refer to your device's specific instructions to enter Bluetooth pairing mode (usually involves holding a button until the indicator flashes rapidly or alternates colors).
- Connect to Phone/GPS: On your mobile phone or GPS device, search for Bluetooth devices and select "MAXTO M2" from the list. Confirm pairing if prompted.
- Intercom Pairing: To pair with another MAXTO M2 unit or a compatible Bluetooth intercom, follow the specific pairing instructions for intercom mode (typically involves both units entering pairing mode simultaneously).
Image 3.4: The MAXTO M2 is equipped with a Bluetooth 5.0 chip for enhanced connectivity.
4. Operating Instructions
4.1 Controls and Interface
The MAXTO M2 features an integrated large jog wheel and button for intuitive, one-touch operation, even while wearing gloves.
Image 4.1: The large jog wheel and integrated button allow for easy operation even with gloves.
4.2 Intercom Communication
The M2 supports a 6-way intercom system, allowing up to six riders to communicate simultaneously over a maximum open distance of 3280 feet (approximately 1000 meters). For one-to-one intercom, the effective range is up to 656 feet (200 meters).
- Initiating Intercom: Refer to the quick start guide for specific button presses to initiate and switch between intercom channels.
- Group Intercom: Once paired, riders can join a group conversation, sharing real-time updates and enhancing safety.
Image 4.2: The MAXTO M2 supports 6-way intercom communication with a maximum range of 3280 feet.
4.3 Phone Calls
When paired with your mobile phone, the M2 allows for hands-free phone calls, voice dialing, and automatic answering or rejecting of incoming calls.
- Answering/Rejecting Calls: The device can be configured to automatically answer calls or allow manual control via the main button.
- Voice Dialing: Activate your phone's voice assistant through the headset for hands-free dialing.
4.4 Music and FM Radio
Enjoy stereo music streaming from your paired device or listen to your favorite FM radio stations.
- Music Playback: Control playback (play/pause, next/previous track) directly from the M2 unit.
- FM Radio: Scan and save FM radio stations.
- Music Sharing: The M2 supports remote music and FM sharing with other paired units.
Image 4.3: Enjoy crystal clear sound with remote music and FM sharing capabilities.
5. Maintenance
5.1 Cleaning
Wipe the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
5.2 Water Resistance
The MAXTO M2 is IP65 waterproof, providing protection against dust and low-pressure water jets. It is suitable for use in rainy conditions but should not be submerged in water.
Image 5.1: The MAXTO M2 is IP65 waterproof, offering protection in various weather conditions.
5.3 Battery Care
As mentioned in the charging section, ensure regular charging if the device is stored for long periods to prevent battery degradation.
6. Troubleshooting
If you encounter issues with your MAXTO M2, please refer to the following common solutions:
- No Power: Ensure the device is fully charged. Connect to a power source and check the charging indicator.
- Cannot Pair: Ensure both devices are in pairing mode. Turn off and on Bluetooth on your phone/GPS. Clear previous pairings and try again.
- Intercom Disconnection/Stuttering: Ensure units are within range and there are no significant obstructions. Bluetooth 5.0 and A2DP EDR optimization are designed to minimize these issues.
- Poor Audio Quality/Noise: Check speaker and microphone placement. Ensure the microphone is not directly exposed to wind. The M2 features CVC Intelligent Noise Reduction to minimize background noise.
Image 6.1: The MAXTO M2's advanced noise reduction technology significantly reduces ambient noise for clearer audio.
If problems persist, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | M2 |
| Brand | MAXTO |
| Connectivity Technology | Bluetooth |
| Bluetooth Version | 5.0 |
| Wireless Communication Technology | Bluetooth |
| Intercom Range | Up to 3280 feet (6-way), 656 feet (1-to-1) |
| Intercom Support | 6 Riders |
| Water Resistance Level | IP65 |
| Noise Control | Active Noise Cancellation (CVC) |
| Battery Life | 16 Hours (Bluetooth time) |
| Standby Time | 200 Hours |
| Charging Time | 2.5 - 3 Hours |
| Charging Port | USB Type-C |
| Frequency Response | 20 Hz - 20,000 Hz |
| Item Weight | 11.3 ounces (0.32 Kilograms) |
| Control Type | Touch Control (Jog Wheel) |
| Special Feature | Microphone Included, FM Radio |
8. Warranty and Support
8.1 Quality Assurance
MAXTO is committed to continuous product optimization based on user feedback to ensure a superior experience. All products have passed CE, FCC, and ROHS certifications.
8.2 Customer Support
For any issues with defective accessories or the unit itself, please contact our customer support team. We are available to assist you and aim to respond within 12 hours.
To contact support, please navigate to the seller page (USHuiDa) and use the "ASK A QUESTION" option.
