1. Introduction
Thank you for choosing the JXTZ Motion Sensor Night Light. This device is designed to provide convenient, automatic illumination in dark areas, enhancing safety and comfort. Featuring a motion sensor and light sensor, it activates only when motion is detected in low-light conditions, conserving battery life. This manual provides essential information for the proper setup, operation, and maintenance of your night light.
2. Safety Information
- Do not expose the device to water or excessive moisture. It is not water resistant and intended for indoor use only.
- Do not mix old and new batteries, or different types of batteries.
- Ensure batteries are inserted with correct polarity (+/-).
- Keep out of reach of small children to prevent choking hazards from small parts or batteries.
- Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
3. Package Contents
- 2 x JXTZ Motion Sensor Night Lights
- Adhesive Pads for mounting
Note: 3 AAA batteries per light are required and not included.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | JXTZ |
| Model Number | 34102246-d823-42b1-a90e-76bf2e50ee4d |
| Power Source | 3 x AAA Batteries (not included) |
| Light Source | LED, Warm White (3000K) |
| Motion Sensor Range | 3-5 meters (10-16 ft) |
| Detection Angle | 120 degrees |
| Auto-Off Time | Approximately 20 seconds of no motion |
| Indoor/Outdoor Usage | Indoor Only |
| Material | Plastic (Acrylonitrile Butadiene Styrene) |
| Item Weight | 0.06 Kilograms |
5. Setup
5.1. Battery Installation
- Remove the back cover of the night light.
- Insert 3 AAA batteries into the compartment, ensuring correct polarity (+ and -).
- Replace the back cover securely.
Image: Removing the back cover of the night light.
Image: Installing 3 AAA batteries.
5.2. Mounting the Night Light
- Clean the desired mounting surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive pad.
- Attach the adhesive pad to the back cover of the night light.
- Peel off the protective film from the other side of the adhesive pad.
- Press the night light firmly onto the desired surface for at least 30 seconds.
Image: Attaching the adhesive pad to the night light.
The night light can be installed in various indoor locations such as wardrobes, staircases, kitchens, bathrooms, and hallways.
Image: Easy installation in various locations.
Image: Night light in various indoor settings.
6. Operating Instructions
6.1. Automatic Mode (Motion and Light Sensing)
The JXTZ Motion Sensor Night Light operates automatically based on ambient light and motion detection. It features a 3-position switch for 'Auto', 'On', and 'Off' modes.
- Auto Mode: In this mode, the night light will only activate when it detects motion in a dark environment. It will automatically turn off after approximately 20 seconds of no activity. The motion sensor has a detection range of 3-5 meters (10-16 feet) and a 120-degree detection angle.
- On Mode: The light will remain continuously on, regardless of ambient light or motion.
- Off Mode: The light will remain off.
Image: Lighting sensing and motion-activated operation.
Image: Sensitive motion sensor details.
6.2. Video Demonstration
Video: This video demonstrates the battery installation process and the motion-sensing functionality of the JXTZ Motion Sensor Night Light, showing how it activates in dark conditions upon detecting movement.
7. Maintenance
7.1. Battery Replacement
When the light output diminishes or the device stops responding to motion, it is time to replace the batteries. Follow the steps in Section 5.1 to replace the 3 AAA batteries. Always use fresh, high-quality batteries for optimal performance.
7.2. Cleaning
To clean the night light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
8. Troubleshooting
- Light does not turn on:
- Check if the batteries are installed correctly and are not depleted. Replace if necessary.
- Ensure the switch is set to 'Auto' or 'On'.
- Verify that the ambient light is dark enough for the light sensor to activate (in 'Auto' mode).
- Confirm there is motion within the detection range of the sensor.
- Light does not turn off:
- Ensure the switch is not set to 'On' mode.
- Check for continuous motion in the sensor's detection area.
- Ensure there is no strong light source directly hitting the light sensor, which might interfere with its operation.
- Motion sensor is not sensitive:
- Ensure the sensor is not obstructed.
- Check battery levels; low batteries can affect sensor performance.
- Consider repositioning the light to optimize the detection angle and range.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact JXTZ customer service through the retailer where the product was purchased. Please have your model number and purchase date available when contacting support.