Important Safety Information
Read all instructions carefully before assembling and using this bunk bed. Keep this manual for future reference.
- Guardrails: The upper bunk is equipped with full-length guardrails to prevent falls. Ensure they are always securely in place.
- Weight Capacity: The upper bunk has a maximum weight capacity of 250 lbs. The lower bunk has a maximum weight capacity of 350 lbs. Do not exceed these limits.
- Mattress Thickness: For the upper bunk, use a mattress no thicker than 6 inches. For the lower bunk, use a mattress between 8 and 10 inches thick. Ensure the mattress on the upper bunk is below the top edge of the guardrails.
- Ladder: Use the integrated ladder for safe access to the upper bunk. Do not use alternative climbing methods.
- Assembly: This bunk bed requires assembly by at least two adults. Ensure all connections are tight before use.
- General Use: Do not allow more than one person on the upper bunk at any time. Do not attach or hang items from any part of the bunk bed that are not designed for use with the bed; this could create a strangulation hazard.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact TMEOSK customer support.
The package typically includes:
- Bed frame components (headboards, footboards, side rails, support beams)
- Ladder components
- Guardrails
- Slats for both upper and lower bunks
- Hardware pack (bolts, nuts, washers, Allen wrench)
- Assembly instructions
Note: All parts are labeled for easy identification during assembly.
Setup and Assembly
Assembly of the TMEOSK Twin Over Twin Metal Bunk Bed requires two people. Follow the step-by-step instructions provided in your package. Ensure all connections are secure before use.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (like a carpet) to prevent scratches.
- Identify Parts: Refer to the parts list in your included manual to identify each component. All parts are typically labeled.
- Assemble Lower Bunk: Begin by assembling the lower bunk frame according to the diagrams. Attach side rails to headboards/footboards.
- Install Lower Slats: Place and secure the mattress slats for the lower bunk.
- Assemble Upper Bunk: Construct the upper bunk frame, including the guardrails.
- Attach Upper Bunk: Carefully lift and secure the upper bunk frame onto the lower bunk frame using the designated connectors.
- Install Upper Slats: Place and secure the mattress slats for the upper bunk.
- Attach Ladder: Securely attach the ladder to the bunk bed frame.
- Final Tightening: Once fully assembled, go back and ensure all bolts and screws are securely tightened. Do not overtighten.

Image: Detailed dimensions of the TMEOSK Twin Over Twin Metal Bunk Bed. The overall length is 77.1 inches, width is 40.9 inches, and total height is 53.7 inches. The upper bunk guardrail height is 11.2 inches.
Operating Instructions
This bunk bed is designed for safe and comfortable use. Observe the following guidelines:
- Mattress Placement: Ensure mattresses are correctly sized and positioned on both bunks. The upper bunk mattress should not exceed 6 inches in thickness to maintain guardrail effectiveness.
- Ladder Use: Always use the integrated ladder for accessing the upper bunk. Face the ladder when climbing up or down.
- Lower Bunk Versatility: The low design of the lower bunk makes it suitable for younger children or can be utilized as a convenient storage area.
- Stability: The steel construction provides a stable and quiet sleeping surface. Avoid excessive rocking or sudden movements that could compromise stability.

Image: The TMEOSK Twin Over Twin Metal Bunk Bed, black finish, shown in a child's bedroom with bedding and decorative items. This image illustrates the bed's appearance in a typical setting.
Maintenance
Regular maintenance will ensure the longevity and safety of your bunk bed.
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any loose hardware to maintain structural integrity. Do not overtighten.
- Structural Integrity: Ensure the bed remains level and stable. If any part appears bent or damaged, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your bunk bed, refer to the following common solutions:
- Squeaking Noises:
- Check all bolts and connections. Loose hardware is a common cause of squeaking. Tighten them securely.
- Ensure the bed is on a level surface.
- Bed Feels Unstable:
- Verify that all assembly steps were followed correctly and all hardware is fully tightened.
- Ensure the bed is not missing any structural components.
- Missing or Damaged Parts:
- Carefully re-check the packaging for any overlooked items.
- Contact TMEOSK customer support for assistance with replacement parts.
Specifications
| Model Number | 536AAN |
| Brand | TMEOSK |
| Type | Twin Over Twin Metal Bunk Bed |
| Material | Steel, Metal |
| Color | Black |
| Overall Dimensions (L x W x H) | 77.1" x 40.9" x 53.7" (77"L x 41"W x 54"H) |
| Upper Bed Weight Capacity | 250 lbs |
| Lower Bed Weight Capacity | 350 lbs |
| Recommended Upper Mattress Thickness | 6 inches |
| Recommended Lower Mattress Thickness | 8-10 inches |
| Assembly Required | Yes |
| Item Weight | 73 pounds |
Warranty and Support
For warranty information or assistance with your TMEOSK Twin Over Twin Metal Bunk Bed, please contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
If you have questions regarding assembly, missing parts, or product functionality, please reach out to TMEOSK customer support for prompt assistance.
Contact information for TMEOSK can typically be found on their official website or through the retailer where the product was purchased.