OLIGHT Baton3 Pro Max 2500 Lumens Rechargeable EDC Flashlight User Manual

1. Introduction

Thank you for choosing the OLIGHT Baton3 Pro Max. This compact and powerful EDC (Everyday Carry) flashlight is designed for reliability and performance in various situations, from daily tasks to outdoor adventures and emergency preparedness. It features a high output of 2500 lumens, a long runtime, and an upgraded proximity sensor for enhanced safety.

Image 1.1: The OLIGHT Baton3 Pro Max flashlight, showcasing its compact design and textured body.

2. Package Contents

Please inspect the package contents upon receipt. If any items are missing or damaged, contact OLIGHT customer support.

• Baton3 Pro Max Flashlight (with included battery)
• MCC3 Magnetic Charging Cable
• L-shape Stand ×1
• Pouch ×1
• User Manual ×1

Image 2.1: All items included in the Baton3 Pro Max package: flashlight, charging cable, L-shape stand, pouch, and user manual.

3. Setup

3.1 Initial Charging

Before first use, fully charge the flashlight. The Baton3 Pro Max uses a magnetic charging system.

1. Connect the USB end of the MCC3 Magnetic Charging Cable to a power source (e.g., USB adapter, computer USB port).
2. Attach the magnetic charging end to the tail cap of the flashlight. The indicator on the charging cable will glow red during charging and turn green when fully charged.

Image 3.1: The Baton3 Pro Max connected to the magnetic charging cable, illustrating the 'one-step charging' process.

3.2 L-shape Stand Installation

The included L-shape stand provides a convenient magnetic storage solution for your flashlight.

1. Choose a clean, flat surface for mounting the L-shape stand.
2. Remove the protective film from the adhesive backing of the stand.
3. Press the stand firmly onto the desired surface for several seconds to ensure a secure bond.
4. Attach the flashlight to the magnetic surface of the L-shape stand.

Image 3.2: The Baton3 Pro Max mounted on its L-shape stand, demonstrating convenient storage and accessibility.

4. Operating Instructions

4.1 Basic Operation

• Turn On/Off: Single click the side switch to turn the flashlight on or off.
• Change Brightness Level: When the flashlight is on, press and hold the side switch to cycle through Low, Medium, and High modes. Release the switch to select the desired mode.
• Moonlight Mode: When the flashlight is off, press and hold the side switch for approximately 1 second to activate Moonlight mode.
• Turbo Mode: Double click the side switch to activate Turbo mode. Double click again to return to the previous mode.
• Strobe Mode: Triple click the side switch to activate Strobe mode. Single click or press and hold to exit.

4.2 Battery Indicator (Shake to Awake)

The Baton3 Pro Max features a 'Shake to Awake' battery indicator. Give the flashlight a quick shake to activate the indicator light on the side switch, showing the remaining battery level without turning on the main beam.

• Green: Battery level > 60%
• Orange: Battery level 10% ~ 60%
• Red: Battery level < 10%

Image 4.1: Visual representation of the 'Shake to Awake' battery indicator, showing green, orange, and red lights corresponding to battery levels.

4.3 Proximity Sensor

The upgraded proximity sensor automatically dims the light output when an obstruction is detected close to the lens, preventing overheating and potential damage. This feature is enabled by default.

Image 4.2: Diagram illustrating the components of the Baton3 Pro Max, highlighting the newly redesigned lens and the location of the hidden proximity sensor.

4.4 Lockout Mode

To prevent accidental activation, the flashlight can be put into lockout mode.

• Activate Lockout: When the flashlight is off, press and hold the side switch for approximately 2 seconds. The flashlight will briefly enter Moonlight mode, then turn off to signal lockout.
• Deactivate Lockout: Press and hold the side switch for over 1 second until Moonlight mode is activated again.

Image 4.3: Diagram showing the press and hold actions to activate and deactivate the lockout mode.

5. Maintenance

5.1 Cleaning

• Wipe the flashlight body with a clean, soft cloth.
• Clean the lens with a lens cleaning cloth to maintain optimal light output.
• Keep the magnetic tail cap and charging port free of debris to ensure proper charging.

5.2 Storage

• Store the flashlight in a cool, dry place.
• For long-term storage, it is recommended to charge the battery every 3-6 months to maintain battery health.
• If not using for an extended period, consider activating lockout mode to prevent accidental discharge.

6. Troubleshooting

• Flashlight not turning on: Ensure the battery is charged. Check if the flashlight is in lockout mode (refer to section 4.4).
• Charging issues: Verify the MCC3 cable is properly connected to both the power source and the flashlight's tail cap. Ensure the magnetic contacts are clean.
• Light dims unexpectedly: The proximity sensor may be activated due to an obstruction near the lens. Clear any obstructions.
• Inconsistent battery indicator: Ensure the flashlight is shaken firmly but gently to activate the indicator.

7. Specifications

Image 7.1: Overview of the Baton3 Pro Max's key performance specifications including max output, runtime, throw, drop test rating, and waterproof rating.

Image 7.2: Detailed output table showing different brightness modes, their respective runtimes, and beam distances.

8. Warranty

The OLIGHT Baton3 Pro Max comes with a Lifetime Warranty. For detailed warranty terms and conditions, please refer to the official OLIGHT website or contact customer support.

9. Support

For further assistance, technical support, or warranty claims, please visit the official OLIGHT website or contact their customer service department.

OLIGHT Official Store: Visit the OLIGHT Store on Amazon