Introduction
The CERAGEM Master V4 is a holistic medical therapy bed developed and produced in South Korea. It combines traditional Western medicine, modern technology, and traditional Asian therapy methods to stimulate the body's self-healing powers and alleviate tension and pain. Unlike conventional massage beds, the CERAGEM Master V4 integrates back massage, chiropractic principles, acupressure, moxibustion effect, and deep infrared heat. This combination relaxes the spine and activates spinal muscles, aiming to relieve blocked nerves.
An integrated back scan individually measures the length, shape, and orientation of the spine. This allows the device to automatically identify problematic and painful areas for targeted treatment, providing an unparalleled and personalized thermal massage experience.
Image: The CERAGEM Master V4 med massage bed in its compact, folded state, ready for storage or transport.
Safety Information and Warnings
Important: Please read this instruction manual carefully before use. Consult a physician before using the device, especially if you have pre-existing medical conditions.
- Handle and position the device with care, as it is heavy. Seek assistance if necessary during setup or relocation.
- Observe possible contraindications. Do not use the device if you have conditions that may be adversely affected by massage, heat, or spinal manipulation.
- Use the device only as indicated in this manual. Any unauthorized modifications or uses may result in injury or damage to the device.
- The product packaging may contain information different from what is shown on our website. Always read the label, warnings, and instructions provided with the product before using or consuming it.
Product Overview
The CERAGEM Master V4 med offers a comprehensive therapeutic experience with advanced features:
- Massage Programs: 15 programs, including 10 automatic and 5 manual, with 9 intensity levels.
- External Abdominal Vibrator: Heated with deep heat for targeted abdominal therapy.
- Targeted Massage: Users can select specific vertebrae and areas for concentrated thermal massage.
- Voice Guide: Provides audio feedback on the massager's path along the spine for enhanced control and comfort.
- Spinal Scanning: After an initial spinal scan, the device adapts therapy to problematic areas of the spine.
- Spinal Correction & Decompression: Supports spinal correction, back extension, stretching, and decompression.
- Deep Tissue Massage: Delivers intense massage to muscles and fascia up to 7 cm deep.
- Hyperthermia Treatment: Facilitates hyperthermia (fever therapy) to mobilize deposits and strengthen the immune system.
- Disc Nourishment: Supports "disc nourishment," which may contribute to measurable height increase.
Image: Component diagram of the CERAGEM Master V4 med, showing the main mat, head cushion, remote control, and external vibrator connections.
Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Placement: Choose a flat, stable surface for the massage bed. Ensure sufficient space around the device for comfortable use and access. The bed dimensions are approximately 200.4 cm (length) x 70 cm (width) x 45 cm (height).
- Unfolding (if applicable): If the unit is in a folded state, carefully extend the main mat and support frame until it is fully open and stable. Refer to the product image showing the extended bed.
- Connect Power: Plug the power cord into the designated port on the device, then into a suitable electrical outlet. Ensure the power switch is in the OFF position before connecting.
- Attach Accessories: Connect the external abdominal vibrator and remote control to their respective ports on the main unit.
Image: The CERAGEM Master V4 med massage bed fully extended, illustrating its operational configuration.
Image: The external abdominal vibrator, an accessory for the CERAGEM Master V4 med, designed for targeted abdominal therapy.
Operating Instructions
- Power On: Locate the power switch on the main unit and turn it to the ON position. The remote control screen should illuminate.
- Spinal Scan: Lie down comfortably on the massage bed. The device will initiate a spinal scan to measure your spine's length and curvature. A voice guide will announce "Spinal scanning will now begin."
- Select Program: Use the remote control to navigate through the 15 available massage programs (10 automatic, 5 manual). Refer to the remote control diagram for button functions.
- Adjust Intensity: Adjust the massage intensity using the dedicated buttons on the remote control. There are 9 intensity levels available.
- Targeted Massage: For manual programs, you can select specific areas of your spine or body for concentrated massage and heat therapy.
- External Vibrator Use: Position the external abdominal vibrator on your abdomen or other desired areas for additional deep heat and vibration therapy.
- Session End: The device will automatically stop after the selected program duration. You can also manually stop the session using the remote control.
- Power Off: Turn off the main power switch after each use.
Image: The remote control screen showing the "Spinal scanning will now begin" message, indicating the start of the personalized therapy process.
Image: The remote control for the CERAGEM Master V4 med, used to select massage programs, adjust intensity, and control other functions.
Maintenance
- Cleaning: Disconnect the power cord before cleaning. Wipe the surface of the massage bed and accessories with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the massage bed in a clean, dry place. If the unit is foldable, fold it for compact storage.
- Inspection: Regularly inspect the power cord and all connections for any signs of damage. If damage is found, discontinue use and contact customer support.
- Avoid Liquids: Do not expose the device to excessive moisture or liquids. The device is not water-resistant.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power cord not properly connected; Power switch is OFF; No power from outlet. | Ensure power cord is securely plugged into both the device and a working electrical outlet. Turn the power switch to ON. Test the outlet with another device. |
| Massage function not working. | Program not selected; Intensity set to zero; Spinal scan not completed. | Select a massage program. Increase intensity level. Ensure the spinal scan has completed successfully. |
| Remote control unresponsive. | Remote not connected; Batteries low (if applicable, though this model seems wired). | Ensure the remote control cable is securely connected to the main unit. If the remote uses batteries, check and replace them. |
| Unusual noises during operation. | Obstruction; Internal component issue. | Stop the device immediately. Check for any foreign objects or obstructions. If the noise persists, contact customer support. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact CERAGEM customer support. Do not attempt to repair the device yourself.
Specifications
| Model Name | CGM MB-1901 |
| Brand | CERAGEM |
| Product Dimensions (L x W x H) | 200.4 x 70 x 45 cm (78.9 x 27.6 x 17.7 inches) |
| Item Weight | 65 kg (143.3 lbs) |
| Material | Plastic |
| Color | Anthracite |
| Power Source | Corded Electric |
| Special Feature | Heat (Infrared) |
| Massager Shape | Massage Roller |
| Specific Product Uses | Back, Spine, Full Body |
| Massage Therapy Technique | Vibration |
| Water Resistance Level | Not Water Resistant |
| Product Grade | Professional |
| GTIN / UPC | 732023244306 |
What's in the Box
The CERAGEM Master V4 med package includes:
- CERAGEM Master V4 med Main Unit (Massage Bed)
- External Abdominal Vibrator (Heated)
- Remote Control
- Power Plug / Power Cord
- Instruction Manual (this document)
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact the seller directly.
Customer Support: For any questions, technical assistance, or service requests, please contact the specialized customer service of Ceragem-Shop.
The product is returnable within 14 days of delivery, if requested. Please refer to the seller's return policy for detailed terms and conditions.
