Aigostar 2-Outlet Power Strip with Switch and Child Safety - Instruction Manual

Introduction

This manual provides essential information for the safe and efficient use of your Aigostar 2-Outlet Power Strip. Please read these instructions carefully before use and retain them for future reference.

Important Safety Instructions

• Do not exceed the maximum load of 3680 Watts (16 Amps).
• This power strip is designed for indoor use only.
• Do not connect multiple power strips in series.
• Ensure the power strip is fully inserted into a wall socket.
• Keep away from water and high humidity environments.
• Do not disassemble or modify the device.
• The integrated child protection devices are designed to prevent accidental insertion of objects into the sockets.
• Unplug the power strip from the wall socket when not in use for extended periods.

Product Overview

The Aigostar 2-Outlet Power Strip features two Type F (German standard) sockets, an integrated on/off switch, and child safety mechanisms. Its compact design with a short cable is ideal for minimizing clutter.

Image 1: The Aigostar 2-Outlet Power Strip connected to a wall outlet, showing its compact form factor and the power button.

Key Components:

• 2 AC Outlets: Type F sockets for connecting electrical devices.
• On/Off Switch: Controls power to both outlets simultaneously. Includes a soft indicator light.
• Child Protection Device: Integrated safety shutters in each socket.
• Short Cable (0.05m): Designed for direct wall connection without excess cable.
• Keyhole Slots: For optional wall mounting.

Setup and Installation

1. Unpack: Carefully remove the power strip from its packaging.
2. Placement: Choose a suitable wall socket that is easily accessible and not obstructed. Ensure the environment is dry and free from excessive heat.
3. Connect to Wall Socket: Plug the power strip's main plug firmly into a standard Type F wall socket.
4. Optional Wall Mounting: If desired, use the two keyhole slots on the back of the power strip to mount it securely to a wall using appropriate screws (not included).
   

   Image 2: The power strip illustrating the two keyhole slots on its rear for optional wall mounting.

Operating Instructions

1. Connecting Devices: Insert the plugs of your electrical devices into the two available Type F sockets on the power strip. Ensure plugs are fully inserted.
2. Power On/Off: Press the gray on/off switch located on the top of the power strip to supply or cut power to all connected devices.
   

   Image 3: Overview of the power strip highlighting its dimensions, 2 AC outlets, 5cm cable length, 45-degree plug design, and maximum power rating of 3680W.

3. Child Safety: The integrated child protection devices require a certain amount of pressure on both pins simultaneously to open the shutters, preventing single-pin insertion.
   

   Image 4: A close-up view of the power strip's socket, demonstrating the integrated child protection device which prevents single-pin insertion.

4. Indicator Light: A soft red indicator light will illuminate when the power strip is switched on, indicating that power is being supplied to the outlets. This light is designed to be subtle and not disruptive.
   

   Image 5: The power strip's soft indicator light is shown, designed not to disturb sleep, emphasizing its energy-saving feature.

Maintenance and Care

• Cleaning: Disconnect the power strip from the wall socket before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the power strip in a dry, cool place, away from direct sunlight and moisture.
• Inspection: Periodically inspect the power strip and its cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately and replace the unit.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Aigostar website. Keep your proof of purchase for warranty claims.