LGIDTECH FUT035S+ Miboxer 2 in 1 LED Strip Controller

Introduction

This manual provides comprehensive instructions for the LGIDTECH FUT035S+ Miboxer 2 in 1 LED Strip Controller (2.4GHz). This versatile controller is designed to work with both single color (2-wire) and CCT dual white (3-wire) LED strip lights, offering flexible lighting control solutions.

Key Features:

• Supports two LED strip types: Single Color (2 wires) and CCT Dual White (3 wires).
• Switchable output modes for different LED strip configurations.
• Compatible with various MiBoxer/Mi-Light 2.4GHz series remote controllers (sold separately).
• Smartphone APP control via WL-Box Gateway (sold separately).
• Voice control compatibility with Alexa and Google Home via WL-Box1 Gateway (sold separately).

Figure 1: LGIDTECH FUT035S+ Miboxer 2 in 1 LED Strip Controller, showing input/output terminals and indicator lights.

Setup and Installation

Before installation, ensure all power is disconnected. This controller is designed for indoor use only.

1. Wiring Connections

The FUT035S+ controller features two power interfaces: a wiring port and a DC5.5*2.1 port. Connect your DC12~24V power supply to the input terminals (V+ and V-). Connect your LED strip light to the output terminals. Ensure correct polarity (V+ to V+, W to W, CW to CW for CCT strips, or V+ to V+, W to W for single color strips).

Figure 2: Detailed view of the controller's LED light interface and power input options.

2. Switching Output Mode

The controller supports two output modes: Single Color and Dual White (CCT). To switch between modes:

1. Ensure the controller is powered on.
2. Press the [SET] button.
3. Observe the indicator light:
   • Red indicator: Single Color mode.
   • Green indicator: Dual White mode.
4. Press the [SET] button continuously to cycle through the output modes until the desired mode is selected.

3. Linking with Remote Controller (Sold Separately)

To control the LED strip with a MiBoxer/Mi-Light 2.4GHz remote controller (e.g., FUT007, B2, K1, S1-W), you need to link the controller to the remote:

1. Power off the FUT035S+ controller.
2. Power on the controller.
3. Within 3 seconds of powering on, press the [SET] button 1 time to activate linking mode.
4. Refer to your specific remote controller's manual for its linking procedure (usually involves pressing a specific button on the remote).

Figure 3: Examples of compatible Mi-Light / MiBoxer 2.4GHz series remote controllers (sold separately).

Operating Instructions

1. Remote Control Operation

Once linked, use your MiBoxer/Mi-Light 2.4GHz remote controller to adjust brightness, color temperature (for CCT strips), and turn the lights on/off. Refer to your remote's specific manual for detailed button functions.

2. Smartphone APP Control (via WL-Box Gateway)

To control the LED strip via smartphone APP, the WL-Box Gateway (sold separately, search B01N7C3HXQ) is required. Connect the WL-Box Gateway to your home Wi-Fi network and follow its instructions to add the FUT035S+ controller. This allows for control even when you are away from home.

Figure 4: Diagram illustrating smartphone app and voice control setup requiring a 2.4GHz gateway (WL-Box1).

3. Voice Control (via WL-Box1 Gateway)

The FUT035S+ controller is compatible with Alexa and Google Home when used with the WL-Box1 Gateway (sold separately). Once the gateway is set up and linked to your voice assistant, you can use voice commands to control your LED strip lights.

4. Signal Transmitting Function

One FUT035S+ LED controller can transmit signals from the remote control to another LED controller within 30 meters. As long as there is an LED controller within 30 meters, the remote control distance can be extended, effectively making the control distance limitless in a chain setup.

Figure 5: Illustration of the signal transmitting feature, extending control range between multiple controllers.

Maintenance

The LGIDTECH FUT035S+ controller requires minimal maintenance. Keep the device clean and free from dust. Do not expose it to moisture or extreme temperatures outside its operating range (-10~40℃).

• Ensure proper ventilation around the controller.
• Clean with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Avoid physical shock or dropping the device.

Troubleshooting

Specifications

Figure 6: Product dimensions and key electrical specifications.

Warranty and Support

For warranty information or technical support, please contact LGIDTECH customer service through the retailer where the product was purchased or visit the official LGIDTECH store page on Amazon. Keep your purchase receipt for warranty claims.

Online Resources:

• LGIDTECH Amazon Store: Visit Store
• Related Products (Gateways/Remotes):
  • WL-Box Gateway
  • Compatible Remote Example 1
  • Compatible Remote Example 2