Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LEDVANCE 15W LED Light Disk. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for both new construction and retrofit applications, offering versatile installation options and adjustable color temperature settings.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- Ensure the supply voltage is compatible with the fixture's requirements (120V).
- Do not handle the fixture with wet hands.
- This product is suitable for dry, damp, and wet locations.
Package Contents
Verify that all components are present before beginning installation:
- 1x LEDVANCE 15W LED Light Disk
- 1x J-box adapter
- 1x Screw Base adapter (E26 Medium)
- Spring clips
- Wire nuts
- Instruction Manual
Setup and Installation
The LEDVANCE 15W LED Light Disk offers multiple installation options: flush mount for 3" or 4" J-boxes, or retrofit for most 5" or 6" screw-base downlights.
Step 1: Power Disconnection
Before starting any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box. Verify with a voltage tester.
Step 2: Select Color Temperature (CCT)
Locate the CCT selection switch on the back of the LED Light Disk. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch to the appropriate setting. This must be done before final installation.
Image: The CCT selection switch allows adjustment of the light's color temperature from warm white to daylight.
Step 3: Installation Method
Option A: J-Box Flush Mount Installation (3" or 4" J-boxes)
- Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and ground to ground.
- Secure the J-box adapter to the junction box.
- Attach the LED Light Disk to the J-box adapter, ensuring a secure fit.
Option B: Recessed Can Retrofit Installation (5" or 6" screw-base downlights)
- Remove the existing bulb and trim from the recessed can.
- Screw the E26 screw-base adapter into the existing socket of the recessed can.
- Connect the fixture's wires to the screw-base adapter's wires.
- Compress the spring clips on the LED Light Disk and insert them into the spring receptacles inside the recessed can. Push the fixture firmly into the can until it is flush with the ceiling.
Image: Components for recessed installation, including spring clips and the E26 screw-base adapter.
Step 4: Power Restoration
Once installation is complete, restore power at the circuit breaker. Test the light fixture to ensure proper operation.
Operating Instructions
Turning On/Off
Operate the LED Light Disk using a standard wall switch connected to the circuit. The fixture will turn on or off with the switch.
Dimming Functionality
This LED Light Disk is dimmable. For optimal performance, use with compatible LED dimmer switches. Refer to your dimmer switch's instructions for specific operation details.
Image: The LEDVANCE 15W LED Light Disk providing illumination.
Maintenance
The LEDVANCE 15W LED Light Disk requires minimal maintenance.
- Cleaning: Ensure power is disconnected before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: This fixture uses integrated LED technology. The LEDs are not user-replaceable. The fixture has a rated lifetime of 50,000 hours.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Incorrect wiring. Faulty switch. | Check circuit breaker/fuse. Verify wiring connections. Test switch functionality. |
| Light flickers or dims improperly. | Incompatible dimmer switch. Loose wiring connection. | Ensure dimmer is LED compatible. Check and secure all wiring connections. |
| Incorrect color temperature. | CCT switch set incorrectly. | Adjust the CCT selection switch on the back of the fixture. |
If troubleshooting steps do not resolve the issue, contact customer support.
Specifications
- Model: 62446
- Wattage: 15W
- Brightness: 900 Lumens
- Color Temperature (CCT): Selectable 2700K, 3000K, 3500K, 4000K, 5000K
- CRI: 90
- Voltage: 120V
- Lifetime: 50,000 hours
- Dimmable: Yes
- Material: Aluminum, Polycarbonate
- Finish: White, Frosted
- Dimensions: 7.75"L x 1.89"W x 7.75"H
- Certifications: cETLus, RoHS, FCC, CA Title 24, Wet Rated
- Installation Type: Flush Mount, Surface Mount, Recessed Retrofit
Image: Dimensional diagram of the LED Light Disk, showing length, width, and height.
Warranty and Support
This LEDVANCE product is backed by a 5-year manufacturer's warranty. For warranty claims or technical support, please contact LEDVANCE customer service. Keep your purchase receipt as proof of purchase.
Manufacturer: Sylvania (LEDVANCE)
For further assistance, visit the official LEDVANCE website or contact their support channels.
