myTouchSmart In-Wall Digital Timer & ENERLITES Wall Plate User Manual

Product Overview

This manual provides instructions for the myTouchSmart In-Wall Digital Timer (Model 26893) and the ENERLITES Combination Toggle Light Switch/Decorator Switch Wall Plate (Model 881131M-W). The myTouchSmart timer is designed to automate indoor and outdoor lighting and appliances, offering convenience, energy savings, and enhanced security. The ENERLITES wall plate provides a durable and aesthetically pleasing finish for your electrical installations.

Figure 1: myTouchSmart In-Wall Digital Timer in its packaging alongside the ENERLITES Combination Wall Plate. This image shows both products as they are typically sold together.

Key Features

myTouchSmart In-Wall Digital Timer (Model 26893)

• Programmable On/Off Buttons: Features four programmable On/Off buttons for customized scheduling.
• Override Buttons: Includes two On/Off override buttons for manual control outside of scheduled times.
• 24-Hour Daily Cycles: Supports daily programming for consistent automation.
• Blue LED Indicators: LED lights indicate active programs and selected buttons.
• Battery Backup: Maintains settings during power outages.
• Wide Compatibility: Works with LED, CFL, Incandescent, and Halogen bulbs, including dimmable LED and CFL.
• Easy Installation: Designed to replace existing light switches with screw terminal installation.

Figure 2: Front view of the myTouchSmart In-Wall Digital Timer in its retail packaging, highlighting key features like 24-hour programming and easy setup.

ENERLITES Combination Wall Plate (Model 881131M-W)

• Durable Material: Made from polycarbonate thermoplastic for high impact resistance.
• Heat & Fade Resistant: Protects against discoloration and fading from temperatures over 100 degrees Fahrenheit.
• Smooth Finish: Provides an attractive appearance and is easy to clean.
• Mid-Size Design: Dimensions of 4.88 inches (H) x 4.92 inches (L) to cover larger wall openings.

Figure 3: Close-up view of the ENERLITES Combination Toggle Light Switch/Decorator Switch Wall Plate, showcasing its clean white finish and dual opening design.

Installation and Setup

Important Safety Information

• WARNING: Risk of Electric Shock. Turn off power at the circuit breaker or fuse box before installation.
• Neutral Wire Required: The myTouchSmart timer requires a neutral wire for proper operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• Single-Pole Applications Only: This timer is designed for use in single-pole wiring configurations only.
• Wall Plate Not Included: The timer package does not include a wall plate. The ENERLITES wall plate (Model 881131M-W) is a suitable companion product.

Installation Steps for myTouchSmart Timer

1. Turn Off Power: Locate the circuit breaker or fuse that supplies power to the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
2. Remove Old Switch: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting their connections.
3. Identify Wires: Identify the Line (hot), Load, and Neutral wires in the wall box. The timer requires a neutral wire.
4. Connect Wires: Connect the wires to the myTouchSmart timer using the screw terminals. Ensure all connections are secure. Refer to the wiring diagram on the product packaging for detailed instructions.
5. Mount Timer: Carefully push the wired timer into the wall box and secure it with screws.
6. Install Wall Plate: Attach the ENERLITES Combination Wall Plate over the timer and secure it with the provided screws.
7. Restore Power: Turn the power back ON at the circuit breaker or fuse box.

Figure 4: Back of the myTouchSmart In-Wall Digital Timer packaging, showing the wiring diagram for installation. This diagram illustrates connections for Line, Load, and Neutral wires.

Initial Setup for myTouchSmart Timer

1. Set Current Time: Upon initial power-up or after a power outage (if battery backup is depleted), the LCD screen will prompt you to set the current time. Use the UP/DOWN arrows to adjust the hour and minute, then press the 'clock' button to confirm.
2. Program On/Off Times:
   • Press the 'program' button to enter programming mode.
   • Use the 'my on' and 'my off' buttons to select the desired program slot (e.g., 'my on 1', 'my off 1').
   • Use the UP/DOWN arrows to set the desired ON and OFF times for each program.
   • Press 'program' again to save and exit, or wait for the display to return to the current time.

Operating Instructions

Manual Control

• On/Off Override Buttons: Use the dedicated 'on' and 'off' buttons located below the display to manually turn the connected device ON or OFF at any time, overriding the programmed schedule until the next scheduled event.

Scheduled Operation

• Once programmed, the timer will automatically turn connected lights or appliances ON and OFF according to your set schedule.
• Blue LED indicators next to each 'my on' and 'my off' button will illuminate when that specific program is active or selected.

Maintenance

• Cleaning: To clean the timer and wall plate, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning the timer.
• Battery Backup: The timer includes a battery backup to retain settings during power outages. If the timer loses settings frequently during short power interruptions, the internal battery may need replacement or recharging (this typically happens automatically when power is restored).
• Wall Plate Durability: The ENERLITES wall plate is designed for long-term durability and resistance to fading. Regular cleaning is sufficient to maintain its appearance.

Troubleshooting

Figure 5: Visual comparison illustrating the difference between a standard size wall plate (4.50in x 4.57in) and the mid-size ENERLITES wall plate (4.88in x 4.92in), demonstrating how the mid-size plate can conceal imperfections.

Specifications

myTouchSmart In-Wall Digital Timer (Model 26893)

• Electrical Ratings: 120VAC, 60 Hz
• Max Load: 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP
• Compatibility: LED, CFL, Incandescent, Halogen bulbs (including dimmable)
• Installation: Single-pole applications only, requires neutral wire
• Certifications: UL Listed
• Dimensions: Approximately 4.13" H x 1.75" W x 1.75" D (excluding mounting tabs)

Figure 6: Detailed view of the myTouchSmart In-Wall Digital Timer with its dimensions labeled, showing its height, width, and depth for installation planning.

ENERLITES Combination Wall Plate (Model 881131M-W)

• Material: Polycarbonate Thermoplastic
• Dimensions: 4.88 inches (H) x 4.92 inches (L)
• Flammability Rating: UL94, V2
• Certifications: UL Listed

Figure 7: An illustration showcasing various ENERLITES wall plate options, including different sizes (oversize, mid-size, standard) and multiple configurations and colors available, emphasizing the versatility of the product line.

Warranty and Support

The myTouchSmart In-Wall Digital Timer (Model 26893) is backed by a one-year limited warranty. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the manufacturer's website.

For additional information and support for myTouchSmart products, you may visit jascoproducts.com.

For ENERLITES products, refer to their official documentation or website for support and warranty details.