Air Relax Plus AR-3 Professional Compression Boots User Manual

Important Safety Information

Please read all instructions carefully before using the Air Relax Plus AR-3 Compression Boots. Failure to follow these instructions may result in injury or damage to the device.

• Consult with a healthcare professional before use if you have any pre-existing medical conditions, especially those related to circulation, blood clots, or skin conditions.
• Do not use the device on open wounds, inflamed areas, or areas with skin infections.
• Keep the device away from water and extreme temperatures.
• Ensure the power cord is not damaged and is properly connected to a suitable power outlet.
• This device is intended for personal and professional use as described in this manual. Any other use is not recommended.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Product Overview

The Air Relax Plus AR-3 Professional Compression Boots system is designed to provide therapeutic compression for leg recovery, circulation improvement, and muscle relief. It features a medical-grade pump and biocompatible garments for safe and effective use.

Key Features:

• FDA(USA) and CE MDD(EUROPE) Cleared: Professional device meeting high standards.
• Variety of Uses: Improves blood circulation, boosts lymphatic fluid movement, aids recovery, and relieves muscle pain.
• High Quality Device: Digitally controlled operation with P (progressive peristaltic), S (cyclical uniform), F (continuous) therapy modes, and a Targeted compression mode.
• Internal Pressure Sensor: Measures leg circumference for even pressure distribution.
• Biocompatible Garment: Non-toxic, lead-free, and tested for medical applications.

Image: The Air Relax Plus AR-3 control unit connected to the leg boots, ready for use.

Setup Instructions

1. Unpack Components: Carefully remove the Air Relax Plus device, leg sleeves, and power adapter from the packaging.
2. Ensure Power Off: Verify that the Air Relax Plus device is turned off and unplugged from any power source.
3. Select Leg Sleeve Size: Choose the appropriate leg sleeve size based on your inseam measurement. Refer to the sizing chart below for guidance.
4. Connect Leg Sleeves: Connect the air hoses from the leg sleeves to the corresponding ports on the control unit. Ensure a secure connection.
5. Power Connection: Plug the power adapter into the control unit, then plug the adapter into a standard electrical outlet.
6. Positioning: Place the leg sleeves on your legs, ensuring a snug but comfortable fit. Use the zippers or fasteners to secure them.

Sizing Chart:

Image: Sizing chart for Air Relax AR 3.0 leg sleeves, showing inseam and height recommendations for S, M, and L sizes.

Note: This sizing chart is approximate. If you are between sizes, choose the longer sleeves. Inseam provides a more accurate result than height. Measure the length from the top of the inside leg at the crotch to the heel.

Operating Instructions

Once the device is set up, follow these steps to begin your compression therapy session:

1. Power On: Press the ON/OFF button on the control unit to power on the device.
2. Select Mode: Press the MODE button to cycle through the available therapy modes:
   • P (Progressive Peristaltic): Sequential compression that moves upwards.
   • S (Cyclical Uniform): Uniform compression across all chambers.
   • F (Continuous Therapy): Sustained compression.
3. Adjust Pressure: Use the PRESSURE buttons to increase or decrease the compression intensity to your comfort level. The internal pressure sensor will ensure even distribution.
4. Set Time: Use the TIME button to set the duration of your session.
5. Targeted Compression (Optional): If desired, press the TARGET button to focus compression on specific areas (shins, quads, feet, calves, abductors, adductors, and hamstrings) during progressive peristaltic mode.
6. Start Session: The session will begin automatically after selecting your settings.
7. End Session: The device will automatically turn off after the set time. You can also press the ON/OFF button to stop the session manually.
8. Disconnect: After use, turn off the device, unplug it, and disconnect the leg sleeves.

Image: Close-up of the Air Relax Plus AR-3 control unit, highlighting the intuitive user interface for mode, target, pressure, and time settings.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Air Relax Plus AR-3 system.

• Cleaning the Sleeves: Wipe the exterior of the leg sleeves with a damp cloth and mild soap. Do not immerse the sleeves in water. Allow them to air dry completely before storage.
• Cleaning the Control Unit: Use a dry, soft cloth to wipe the control unit. Avoid using abrasive cleaners or solvents.
• Storage: Store the device and sleeves in a clean, dry place away from direct sunlight and extreme temperatures. Ensure the hoses are not kinked during storage.
• Inspection: Periodically inspect the power cord, air hoses, and sleeves for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.

Troubleshooting

If you encounter any issues with your Air Relax Plus AR-3 system, refer to the following common problems and solutions:

If the issue is not resolved by the above steps, please contact Air Relax customer support.

Specifications

Warranty and Support

Manufacturer Warranty:

The Air Relax Plus AR-3 system comes with a 1-year manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support:

For technical assistance, warranty claims, or any questions regarding your Air Relax Plus AR-3 Professional Compression Boots, please contact Air Relax customer support.

Brand: Air Relax

Manufacturer: AIR RELAX

Please refer to the official Air Relax website or your purchase documentation for specific contact details.