Jansite JH-H10-US5 Wireless Solar Tire Pressure Monitoring System User Manual

1. Introduction

The Jansite JH-H10-US5 Tire Pressure Monitoring System (TPMS) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. This system utilizes advanced technology to detect abnormal tire conditions and alert the driver, helping to prevent accidents and extend tire lifespan. This manual provides detailed instructions for the installation, operation, and maintenance of your TPMS.

2. Package Contents

Please check the package contents upon unboxing to ensure all components are present:

• 1 x TPMS Monitor (JH-H10-US5)
• 4 x External Tire Pressure Sensors
• 1 x Detachable Bracket for Monitor
• 1 x USB Type-C Charging Cable
• 4 x Anti-theft Nuts
• 1 x Spanner Tool
• 1 x User Manual (this document)

The image displays the Jansite JH-H10-US5 TPMS monitor along with four external tire pressure sensors, illustrating the complete system components.

3. Key Features

• Advanced Monitoring: Real-time monitoring of four tire pressures and temperatures with 0.01 bar accuracy.
• Customizable Alarms: Six types of alarms (fast air leak, high/low pressure, high temperature, sensor loss/failure, sensor low battery) with user-configurable values (pressure range 1.5-6.0 bar / 22-87 PSI). Front and rear wheel alarm values can be set separately.
• Detachable Bracket: Flexible windshield mounting with a detachable bracket for easy monitor removal for settings adjustments or USB charging.
• Automatic Sleep & Vibration Monitoring: The monitor automatically enters sleep mode after 5 minutes of no vibration to save power and powers on when vibration is detected.
• Dual Charging Methods: Supports both solar charging and Type-C USB charging.
• Large Color Display: 3.5-inch LCD wide-angle color display with bright backlight for clear data readability day and night, including time display.
• Sensor Position Function: Supports sensor replacement position function, eliminating the need to re-pair sensors when changing tire positions.
• Default Settings Restore: Ability to restore the monitor to its default factory settings.

4. Setup and Installation

4.1 Monitor Installation

1. Attach the detachable bracket to the monitor.
2. Clean the desired area on your car's windshield.
3. Securely mount the bracket with the monitor onto the windshield. Ensure the solar panel faces upwards for optimal charging.
4. Adjust the monitor angle (up, down, left, right, 360-degree rotation) for an unobstructed view and easy data reading.

This image shows the TPMS monitor mounted on a car's windshield, highlighting its unobtrusive placement and the detachable bracket design for easy removal and charging.

4.2 Sensor Installation

Each sensor is labeled for a specific tire position (e.g., FL for Front Left, FR for Front Right, RL for Rear Left, RR for Rear Right). Install them accordingly.

1. Unscrew the original valve cap from the tire valve.
2. Screw on an anti-theft nut onto the tire valve.
3. Screw the corresponding sensor onto the tire valve until it is hand-tight.
4. Use the provided spanner tool to tighten the anti-theft nut against the sensor, securing it in place.
5. Repeat for all four tires.

4.3 Initial Power On

After installation, manually long-press the left button on the monitor to turn it on. The monitor will automatically connect with the sensors and display tire data. If no vibration is detected within 5 minutes, the monitor will enter sleep mode. It will automatically power on when vibration is detected again (e.g., when you open the car door or start driving).

5. Operating Instructions

5.1 Display Overview

This image highlights the 3.5-inch large color screen of the TPMS monitor, showing its clear display of tire data and the various angle adjustment options for optimal viewing.

The 3.5-inch color display shows real-time tire pressure and temperature for all four tires, along with the current time and battery status of the monitor. Pressure can be displayed in PSI or BAR, and temperature in ℉ or ℃.

5.2 Setting Alarm Values

The monitor allows you to set custom high and low pressure alarm values, as well as high temperature alarms. These can be set separately for front and rear wheels.

1. Enter the settings menu by long-pressing the appropriate button (refer to the monitor's on-screen prompts or quick guide for specific button functions).
2. Navigate through the settings to find pressure and temperature alarm thresholds.
3. Adjust the values using the navigation buttons. The pressure range is 1.5-6.0 bar / 22-87 PSI.
4. Confirm your settings to save them.

5.3 Automatic Sleep and Vibration Detection

The image illustrates the TPMS monitor's automatic sleep mode for power saving and its vibration detection function, which automatically activates the device when motion is sensed.

The TPMS monitor is equipped with a vibration detection function. If no vibration is detected for 5 minutes, the monitor will automatically enter sleep mode to conserve power. When vibration is detected again (e.g., opening a car door, starting the engine), the monitor will automatically power on and resume displaying tire data. It is recommended not to manually turn off the display if you wish to utilize this automatic feature.

5.4 Sensor Position Replacement Function

If you rotate your tires or change a sensor's position, the system supports a sensor replacement position function. This allows you to reassign sensor positions without needing to re-pair them. Refer to the monitor's settings menu for this option.

5.5 Restoring Default Settings

To restore the monitor to its factory default settings, navigate to the settings menu and select the 'Restore Default Settings' option. Confirm your choice when prompted.

6. Maintenance

6.1 Charging the Monitor

The image demonstrates the dual charging capabilities of the TPMS monitor, featuring both solar charging via its integrated panel and wired charging through a Type-C USB port.

The monitor supports two charging methods:

• Solar Charging: The integrated solar panel on the monitor charges the internal battery when exposed to sunlight. Ensure the monitor is positioned to receive adequate sunlight.
• USB Type-C Charging: For faster charging or in low-light conditions, connect the provided Type-C USB cable to the monitor's charging port and a suitable USB power source (e.g., car charger, power bank).

6.2 Sensor Battery Replacement

The external sensors are powered by replaceable button cell batteries. When a sensor's battery is low, the monitor will display a low battery alarm for that specific sensor.

1. Unscrew the sensor from the tire valve.
2. Carefully open the sensor casing (usually by twisting or prying with a small tool).
3. Remove the old button cell battery and insert a new one of the correct type (e.g., CR1632, verify with product specifications or original battery).
4. Close the sensor casing securely and re-install it on the tire valve, tightening with the anti-theft nut and spanner tool.

7. Troubleshooting

This image details the six types of automatic alarms provided by the TPMS, including rapid leak, high/low pressure, high temperature, sensor loss, and low battery, alongside visual examples of tire problems.

8. Specifications

9. Warranty and Support

Jansite products are designed for reliability and performance. For warranty information, technical support, or inquiries regarding replacement parts (such as sensors or batteries), please refer to the contact information provided with your purchase or visit the official Jansite website. Please retain your proof of purchase for warranty claims.